DEPARTMENT OF PUBLIC HEALTH AND ENVIRONMENT Solid and Hazardous Waste Commission/ Hazardous Materials and Waste Management Division HAZARDOUS WASTE - IDENTIFICATION AND LISTING OF HAZARDOUS WASTE 6 CCR 1007-3 Part 261 [Editor’s Notes follow the text of the rules at the end of this CCR Document.] _________________________________________________________________________ PART 261 - IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Subpart A - General Sec.

261.1 Purpose and scope.

261.2 Definition of solid waste.

261.3 Definition of hazardous waste.

261.4 Exclusions.

261.5 Reserved.

261.6 Requirements for recyclable materials.

261.7 Residues of hazardous waste in empty containers.

261.8 PCB wastes regulated under Toxic Substance Control Act. 261.9 Requirements for Universal Waste.

Subpart B - Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Wastes 261.10 Criteria for identifying the characteristics of hazardous waste. 261.11 Criteria for listing hazardous waste.

Subpart C - Characteristics of Hazardous Waste 261.20 General 261.21 Characteristic of ignitability.

261.22 Characteristic of corrosivity.

261.23 Characteristic of reactivity.

261.24 Toxicity Characteristic.

Subpart D - Lists of Hazardous Wastes 261.30 General 261.31 Hazardous wastes from non-specific sources.

261.32 Hazardous wastes from specific sources.

261.33 Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof.

261.35 Deletion of certain hazardous waste codes following equipment cleaning and replacement. APPENDICES TO PART 261 APPENDIX I REPRESENTATIVE SAMPLING METHODS APPENDIX II METHOD 1311 TOXICITY CHARACTERISTIC LEACHING PROCEDURE (TCLP) 1 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division APPENDIX III CHEMICAL ANALYSIS TEST METHODS APPENDIX IV [RESERVED FOR RADIOACTIVE WASTE TEST METHODS] APPENDIX V [RESERVED FOR INFECTIOUS WASTE TREATMENT SPECIFICATIONS] APPENDIX VI [RESERVED FOR ETIOLOGIC AGENTS] APPENDIX VII BASIS FOR LISTING HAZARDOUS WASTE APPENDIX VIII HAZARDOUS CONSTITUENTS APPENDIX IX WASTES EXCLUDED UNDER § §260.20 AND 26022 Subpart A - General § 261.1 Purpose and scope.

(a) This part identifies those solid wastes which are subject to regulation as hazardous wastes under Parts 262 through 268 and Part 100 and which are subject to the notification requirements of Part 99. In this part:

(1) Subpart A defines the terms "solid waste" and "hazardous waste," identifies those wastes which are excluded from regulation under Parts 262 through 268, 99 and Part 100 of these regulations and establishes special management requirements for hazardous waste which is recycled.

(2) Subpart B sets forth the criteria used by the Department to identify characteristics of hazardous waste and to list particular hazardous wastes. (3) Subpart C identifies characteristics of hazardous waste. (4) Subpart D lists particular hazardous wastes.

(b) (1) The definition of solid waste contained in this Part applies only to wastes that also are hazardous. For example, it does not apply to materials (such as non-hazardous scrap, paper, textiles, or rubber) that are not otherwise hazardous wastes and that are recycled. (2) This Part identifies only some of the materials which are solid wastes and hazardous wastes under Sections 3007, 3013, and 7003 of RCRA. A material which is not identified or listed in this Part, is still a solid waste and a hazardous waste for purposes of these sections if:

(i) In the case of Sections 3007 and 3013, EPA has reason to believe that the material may be a solid waste within the meaning of Section 1004(27) of RCRA and a hazardous waste within the meaning of Section 1004(5) of RCRA; or (ii) In the case of Section 7003, the statutory elements are established. (c) An attached statement of basis and purpose for these regulations has been adopted by the Board of Health and is hereby incorporated by reference in these regulations pursuant to C.R.S. 1973, 24-4-103.

(d) For the purposes of §§ 261.2 and 261.6:

(1) A “spent material” is any material that has been used and as a result of contamination can no longer serve the purpose for which it was produced without processing; (2) “Sludge” has the same meaning used in § 260.10 of these regulations; 2 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (3) A “by-product” is a material that is not one of the primary products of a production process and is not solely or separately produced by the production process. Examples are process residues such as slags or distillation column bottoms. The term does not include a co-product that is produced for the general public’s use and is ordinarily used in the form it is produced by the process.

(4) A material is “reclaimed” if it is processed to recover a usable product, or if it is regenerated. Examples are recovery of lead values from spent batteries and regeneration of spent solvents.

(5) A material is “used or reused” if it is either:

(i) Employed as an ingredient (including use as an intermediate) in an industrial process to make a product (for example, distillation bottoms from one process used as feedstock in another process). However, a material will not satisfy this condition if distinct components of the material are recovered as separate end products (as when metals are recovered from metal-containing secondary materials); or (ii) Employed in a particular function or application as an effective substitute for a commercial product (for example, spent pickle liquor used as phosphorous precipitant and sludge conditioner in wastewater treatment). (6) “Scrap metal” is bits and pieces of metal parts (e.g., bars, turnings, rods, sheets, wire) or metal pieces that may be combined together with bolts or soldering (e.g., radiators, scrap automobiles, railroad box cars), which when worn or superfluous can be recycled. (7) A material is “recycled” if it is used, reused, or reclaimed. (8) A material is “accumulated speculatively” if it is accumulated before recycled. A material is not accumulated speculatively, however, if the person accumulating it can show that the material is potentially recyclable and has a feasible means of being recycled; and that–during the calendar year (commencing on January 1)–the amount of material that is recycled, or transferred to a different site for recycling, equals at least 75% by weight or volume of the amount of that material accumulated at the beginning of the period. Materials must be placed in a storage unit with a label indicating the first date that the material began to be accumulated. If placing a label on the storage unit is not practicable, the accumulation period must be documented through an inventory log or other appropriate method. In calculating the percentage of turnover, the 75% requirement is to be applied to each material of the same type (e.g., slags from a single smelting process) that is recycled in the same way (i.e., from which the same material is recovered or that is used in the same way). Materials accumulating in units that would be exempt from regulation under § 261.4(c) are not to be included in making the calculation. Materials that are already defined as solid wastes also are not to be included in making the calculation. Materials are no longer in this category once they are removed from accumulation for recycling, however.

(9) “Excluded scrap metal” is processed scrap metal, unprocessed home scrap metal, and unprocessed prompt scrap metal.

3 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (10) “Processed scrap metal” is scrap metal which has been manually or physically altered to either separate it into distinct materials to enhance economic value or to improve the handling of materials. Processed scrap metal includes, but is not limited to scrap metal which has been baled, shredded, sheared, chopped, crushed, flattened, cut, melted, or separated by metal type (i.e., sorted), and, fines, drosses and related materials which have been agglomerated.

(Note: shredded circuit boards being sent for recycling are not considered processed scrap metal. They are covered under the exclusion from the definition of solid waste for shredded circuit boards being recycled (§ 261.4(a)(15)). (11) “Home scrap metal” is scrap metal as generated by steel mills, foundries, and refineries such as turnings, cuttings, punchings, and borings.

(12) “Prompt scrap metal” is scrap metal as generated by the metal working/fabrication industries and includes such scrap metal as turnings, cuttings, punchings, and borings. Prompt scrap is also known as industrial or new scrap metal. § 261.2 Definition of solid waste.

(a) (1) A solid waste is any discarded material that is not excluded by d§ 261.4(a) or that is not excluded by variance granted under § 260.30 and § 260.31. (2) A discarded material is any material which is:

(i) Abandoned, as explained in paragraph (b) of this section; or (ii) Recycled, as explained in paragraph (c) of this section; or (iii) Considered inherently waste-like, as explained in paragraph (d) of this section. (b) Materials are solid waste if they are abandoned by being: (1) Disposed of; or (2) Burned or incinerated; or (3) Accumulated, stored, or treated (but not recycled) before or in lieu of being abandoned by being disposed of, burned, or incinerated; or (4) Sham recycled, as explained in paragraph (g) of this section. (c) Materials are solid wastes if they are recycled or accumulated, stored, or treated before recycling as specified in paragraphs (c)(1) through (c)(4) of this section. (1) Used in a manner constituting disposal.

(i) Materials noted with a “*” in column 1 of Table I are solid waste when they are: (A) Applied to or placed on the land in a manner that constitutes disposal; or (B) Used to produce products that are applied to or placed on the land or are otherwise contained in products that are applied to or placed on the land (in which cases the product itself remains a solid waste). 4 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (ii) However, commercial chemical products listed in § 261.33 are not solid wastes if they are applied to the land and that is their ordinary manner of use. (2) Burning for energy recovery.

(i) Materials noted with a “*” in column 2 of Table 1 are solid wastes when they are: (A) Burned to recover energy;

(B) Used to produce a fuel or are otherwise contained in fuels (in which cases the fuel itself remains a solid waste).

(ii) However, commercial chemical products listed in § 261.33 are not solid wastes if they are themselves fuels.

(3) Reclaimed. Materials noted with a “---” in column 3 of Table 1 are not solid wastes when reclaimed. Materials noted with a “*” in column 3 of Table 1 are solid wastes when reclaimed unless they meet the requirements of § 261.4(a)(17). (4) Accumulated speculatively. Materials noted with a “*” in column 4 of Table 1 are solid wastes when accumulated speculatively.

Table 1 Reclamation (§ 261.2(c)(3))

(except as provided in § 261.4(a)(17) for Use mineral constituting Energy processing Speculative disposal (§ recovery/fuel secondary accumulation 261.2(c)(1)) (§ 261.2(c)(2)) materials) (§ 261.2(c)(4)) (1) (2) (3) (4)

Spent Materials (*) (*) (*) (*)

Sludges (listed in § 261.31 or § (*) (*) (*) (*)

261.32)

Sludges exhibiting a (*) (*) (---) (*)

characteristic of hazardous waste By-products (listed in § 261.31 or (*) (*) (*) (*)

§ 261.32)

By-products exhibiting a (*) (*) (---) (*)

characteristic of hazardous waste Commercial chemical products (*) (*) (---) (---)

listed in § 261.33 Scrap metal that is not excluded (*) (*) (*) (*)

under § 261.4(a)(14)

Note: The terms “spent materials”, “sludges”, “by-products”, “scrap metal”, and “processed scrap metal” are defined in ‘ 261.1. (d) Inherently waste-like materials. The following materials are solid wastes when they are recycled in any manner:

(1) Hazardous Waste Nos. F020, F021 (unless used as an ingredient to make a product at the site of generation), F022, F023, F026, and F028.

5 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (2) Secondary materials fed to a halogen acid furnace that exhibit a characteristic of a hazardous waste or are listed as a hazardous waste as defined in Subparts C or D of this part, except for brominated material that meets the following criteria: (i) The material must contain a bromine concentration of at least 45%; and (ii) The material must contain less than a total of 1% of toxic organic compounds listed in Appendix VIII; and (iii) The material is processed continually on-site in the halogen acid furnace via direct conveyance (hard piping).

(3) The Department will use the following criteria to add wastes to that list: (i) (A) The materials are ordinarily disposed of, burned, or incinerated; or (B) The materials contain toxic constituents listed in Appendix VIII of Part 261 and these constituents are not ordinarily found in raw materials or products for which the materials substitute (or are found in raw materials or products in smaller concentrations) and are not used or reused during the recycling process; and (ii) The material may pose a substantial hazard to human health and the environment when recycled.

(e) Materials that are not solid waste when recycled.

(1) Materials are not solid wastes when they can be shown to be recycled by being: (i) Used or reused as ingredients in an industrial process to make a product, provided the materials are not being reclaimed; or (ii) Used or reused as effective substitutes for commercial products; or (iii) Returned to the original process from which they are generated, without first being reclaimed or land disposed. The material must be returned as a substitute for feedstock materials. In cases where the original process to which the material is returned is a secondary process, the materials must be managed such that there is no placement on the land. In cases where the materials are generated and reclaimed within the primary mineral processing industry, the conditions of the exclusion found at § 261.4(a)(17) apply rather than this paragraph. (2) The following materials are solid wastes, even if the recycling involves use, reuse, or return to the original process (described in paragraphs (e)(1)(i) through (iii) of this section: (i) Materials used in a manner constituting disposal, or used to produce products that are applied to the land; or (ii) Materials burned for energy recovery, used to produce a fuel, or contained in fuels; or (iii) Materials accumulated speculatively; or (iv) Materials listed in paragraphs (d)(1) and (d)(2) of this section. 6 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (f) (1) Documentation of claims that materials are not solid wastes or are conditionally exempt from regulation. In order to claim that a certain material is not a solid waste or is conditionally exempt from regulation, owners or operators must demonstrate that there is a known market or disposition for the material, and that they meet the terms of the exclusion or exemption. In doing so, they must provide appropriate documentation (such as contracts showing that a second person uses the material as an ingredient in a production process) to demonstrate that the material is not a waste, or is exempt from regulation. In addition, owners or operators of facilities claiming that they actually are recycling materials must show that they have the necessary equipment to do so. Materials that are not legitimately recycled are discarded and are solid waste. In determining whether their recycling is legitimate, owners or operators must address the requirements below.

(2) Reserved.

(g) Sham recycling. A hazardous secondary material found to be sham recycled is considered discarded and a solid waste. Sham recycling is recycling that is not legitimate recycling as defined in § 260.43.

§ 261.3 Definition of hazardous waste.

(a) A solid waste, as defined in § 261.2, is a hazardous waste if it has no commercial use or value and:

(1) It is not excluded from regulation as a hazardous waste under § 261.4(b); and (2) It meets any of the following criteria:

(i) It exhibits any of the characteristics of hazardous waste identified in Subpart C of this part. However, any mixture of a waste from the extraction, beneficiation, and processing of ores and minerals excluded under § 261.4(b)(7) and any other solid waste exhibiting a characteristic of hazardous waste under Subpart C is a hazardous waste only if it exhibits a characteristic that would not have been exhibited by the excluded waste alone if such mixture had not occurred, or if it continues to exhibit any of the characteristics exhibited by the non-excluded wastes prior to mixture. Further, for the purposes of applying the Toxicity Characteristic to such mixtures, the mixture is also a hazardous waste if it exceeds the maximum concentration for any contaminant listed in table I to § 261.24 that would not have been exceeded by the excluded waste alone if the mixture had not occurred or if it continues to exceed the maximum concentration for any contaminant exceeded by the nonexempt waste prior to mixture. (ii) It is listed in Subpart D and has not been excluded from the lists in Subpart D under § §260.20 and 260.22.

(iii) Reserved (iv) It is a mixture of solid waste and one or more hazardous wastes listed in Subpart D and has not been excluded from paragraph (a)(2) of this section under § § 260.20 and 260.22, or paragraph (g) of this section; however, the following mixtures of solid wastes and hazardous wastes listed in Subpart D of this part are not hazardous wastes (except by application of paragraph (a)(2)(i) or (ii) of this section) if the generator can demonstrate that the mixture consists of wastewater the discharge of which is subject to regulation under either Section 402 or Section 307(b) of the Clean Water Act (including wastewater at facilities which have eliminated the discharge of wastewater) and: 7 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (A) One or more of the following spent solvents listed in § 261.31 - carbon tetrachloride, tetrachloroethylene, trichloroethylene – provided that the maximum total weekly usage of these solvents (other than the amounts that can be demonstrated not to be discharged to wastewater) divided by the average weekly flow of wastewater into the headworks of the facility’s wastewater treatment or pre-treatment system does not exceed 1 part per million; or (B) One or more of the following spent solvents listed in § 261.31 - methylene chloride, 1,1,1-trichloroethane, chlorobenzene, o- dichlorobenzene, cresols, cresylic acid, nitrobenzene, toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, spent chlorofluorocarbon solvents - provided that the maximum total weekly usage of these solvents (other than the amounts that can be demonstrated not to be discharged to wastewater) divided by the average weekly flow of wastewater into the headworks of the facility’s wastewater treatment or pre-treatment system does not exceed 25 parts per million; or (C) One of the following wastes listed in § 261.32, provided that the wastes are discharged to the refinery oil recovery sewer before primary oil/water/solids separation - heat exchanger bundle cleaning sludge from the petroleum refining industry (EPA Hazardous Waste No. K050), crude oil storage tank sediment from petroleum refining operations (EPA Hazardous Waste No. K169), clarified slurry oil tank sediment and/or in- line filter/separation solids from petroleum refining operations (EPA Hazardous Waste No. K170), spent hydrotreating catalyst (EPA Hazardous Waste No. K171), and spent hydrorefining catalyst (EPA Hazardous Waste No. K172); or (D) A discarded commercial chemical product, or chemical intermediate listed in § 261.33, arising from de minimis losses of these materials from manufacturing operations in which these materials are used as raw materials or are produced in the manufacturing process. For purposes of this sub-paragraph, “de minimis losses include those from normal material handling operations (e.g. spills from the unloading or transfer of materials from bins or other containers, leaks from pipes, valves or other devices used to transfer materials); minor leaks of process equipment; storage tanks or containers; leaks from well maintained pump packings and seals; sample purgings; relief device discharges; discharges from safety showers and rinsing and cleaning of personal safety equipment; and rinsate from empty containers or from containers that are rendered empty by that rinsing; or (E) Wastewater resulting from laboratory operations containing toxic (T) wastes listed in Subpart D, provided that the annualized average flow of laboratory wastewater does not exceed one percent of total wastewater flow into the headworks of the facility’s wastewater treatment or pre- treatment system, or provided the wastes, combined annualized average concentration does not exceed one part per million in the headworks of the facility’s wastewater treatment or pretreatment facility. Toxic (T) wastes used in laboratories that are demonstrated not to be discharged to wastewater are not to be included in this calculation; or 8 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (F) One or more of the following wastes listed in § 261.32 -- wastewaters from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K157)--Provided that the maximum weekly usage of formaldehyde, methyl chloride, methylene chloride, and triethylamine (including all amounts that can not be demonstrated to be reacted in the process, destroyed through treatment, or is recovered, i.e., what is discharged or volatilized) divided by the average weekly flow of process wastewater prior to any dilutions into the headworks of the facility’s wastewater treatment system does not exceed a total of 5 parts per million by weight; or (G) Wastewaters derived from the treatment of one or more of the following wastes listed in § 261.32 -- organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K156)--Provided, that the maximum concentration of formaldehyde, methyl chloride, methylene chloride, and triethylamine prior to any dilutions into the headworks of the facility’s wastewater treatment system does not exceed a total of 5 milligrams per liter. (v) Rebuttable presumption for used oil. Used oil containing more than 1000 ppm total halogens is presumed to be a hazardous waste because it has been mixed with halogenated hazardous waste listed in Subpart D of Part 261 of these regulations. Persons may rebut this presumption by demonstrating that the used oil does not contain hazardous waste (for example, by showing that the used oil does not contain significant concentrations of halogenated hazardous constituents listed in Appendix VIII of Part 261 of these regulations). (A) The rebuttable presumption does not apply to metalworking oils/fluids containing chlorinated paraffins, if they are processed, through a tolling agreement, to reclaim metalworking oils/fluids. The presumption does apply to metalworking oils/fluids if such oils/fluids are recycled in any other manner, or disposed.

(B) The rebuttable presumption does not apply to used oils contaminated with chlorofluorocarbons (CFCs) removed from refrigeration units where the CFCs are destined for reclamation. The rebuttable presumption does apply to used oils contaminated with CFCs that have been mixed with used oil from sources other than refrigeration units.

(b) A solid waste which is not excluded from regulation under paragraph (a)(1) of this section becomes a hazardous waste when any of the following events occur: (1) In the case of a waste listed in Subpart D, when the waste first meets the listing description set forth in Subpart D.

(2) In the case of a mixture of solid waste and one or more listed hazardous wastes, when a hazardous waste listed in Subpart D is first added to the solid waste. (3) In the case of any other waste (including a waste mixture), when the waste exhibits any of the characteristics identified in Subpart C.

(c) Unless and until it meets the criteria of paragraph (d): (1) A hazardous waste will remain a hazardous waste.

9 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (2) (i) Except as otherwise provided in paragraph (c)(2)(ii) or (g) of this section, any solid waste generated from the treatment, storage, or disposal of a hazardous waste, including any sludge, spill residue, ash, emission control dust, or leachate (but not including precipitation run-off) is a hazardous waste. (However, materials that are reclaimed from solid wastes and that are used beneficially are not solid wastes and hence are not hazardous wastes under this provision unless the reclaimed material is burned for energy recovery or used in a manner constituting disposal). (ii) The following solid wastes are not hazardous even though they are generated from the treatment, storage, or disposal of a hazardous waste, unless they exhibit one or more of the characteristics of hazardous waste: (A) Waste pickle liquor sludge generated by lime stabilization of spent pickle liquor from the iron and steel industry (SIC Codes 331 and 332) (B) Wastes from burning any of the materials exempted from regulation by § 261.6(a)(3)(iii)and(iv).

(C) (1) Nonwastewater residues, such as slag, resulting from high temperature metals recovery (HTMR) processing of K061, K062, or F006 waste, in units identified as rotary kilns, flame reactors, electric furnaces, plasma arc furnaces, slag reactors, rotary hearth furnace/electric furnace combinations or industrial furnaces (as defined in § 260.10), that are disposed in subtitle D units, provided that these residues meet the generic exclusion levels identified in the tables in this paragraph, for all constituents, and exhibit no characteristics of hazardous waste. Testing requirements must be incorporated in a facility’s waste analysis plan or a generator’s self-implementing waste analysis plan; at a minimum, composite samples of residues must be collected and analyzed quarterly and/or when the process or operation generating the waste changes. Persons claiming this exclusion will have the burden of proof that the material meets all of the exclusion requirements.

10 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Constituent Maximum for any single composite sample (mg/l) Generic exclusion levels for K061 and K062 nonwastewater HTMR residues Antimony 0.10 Arsenic 0.50 Barium 7.6 Beryllium 0.010 Cadmium 0.050 Chromium (total) 0.33 Lead 0.15 Mercury 0.009 Nickel 1.0 Selenium 0.16 Silver 0.30 Thallium 0.020 Zinc 70 Generic exclusion levels for F006 nonwastewater HTMR residues Antimony 0.10 Arsenic 0.50 Barium 7.6 Beryllium 0.010 Cadmium 0.050 Chromium (total) 0.33 Cyanide (total)(mg/kg) 1.8 Lead 0.15 Mercury 0.009 Nickel 1.0 Selenium 0.16 Silver 0.30 Thallium 0.020 Zinc 70 11 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (2) A one-time notification and certification must be placed in the facility’s files and sent to the Department for K061, K062, or F006 HTMR residues that meet the generic exclusion levels for all constituents and do not exhibit any characteristics that are sent to subtitle D units. The notification and certification that is placed in the generator’s or treater’s files must be updated if the process or operation generating the waste changes and/or if the subtitle D unit receiving the waste changes. However, the generator or treater need only notify the Department on an annual basis if such changes occur. Such notification and certification should be sent to the Department by the end of the calendar year, but no later than December 31. The notification must include the following information: The name and address of the subtitle D unit receiving the waste shipments; the EPA Hazardous Waste Number(s) and treatability group(s) at the initial point of generation; and, the treatment standards applicable to the waste at the initial point of generation. The certification must be signed by an authorized representative and must state as follows: “I certify under penalty of law that the generic exclusion levels for all constituents have been met without impermissible dilution and that no characteristic of hazardous waste is exhibited. I am aware that there are significant penalties for submitting a false certification, including the possibility of fine and imprisonment.”

(D) Biological treatment sludge from the treatment of one of the following wastes listed in § 261.32 - organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K156), and wastewaters from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K157).

(E) Catalyst inert support media separated from one of the following wastes listed in § 261.32 - Spent hydrotreating catalyst (EPA Hazardous Waste No. K171), and Spent hydrorefining catalyst (EPA Hazardous Waste No. K172).

(d) Any solid waste described in paragraph (c) of this section is not a hazardous waste if it meets the following criteria:

(1) In the case of any solid waste, it does not exhibit any of the characteristics of hazardous waste identified in Subpart C of this part. (However, wastes that exhibit a characteristic at the point of generation may still be subject to the requirements of Part 268, even if they no longer exhibit a characteristic at the point of land disposal.) (2) In the case of a waste which is a listed waste under Subpart D, contains a waste listed under Subpart D or is derived from a waste listed in Subpart D, it also has been excluded from paragraph (c) under § § 260.20 and 260.22.

(e) Any material which would be a hazardous waste subject to the provisions of these regulations except for the fact that it has commercial use or value is subject to regulations pursuant to § 261.6 of these regulations.

12 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (f) Notwithstanding paragraphs (a) through (d) of this section and provided the debris as defined in Part 268 of these regulations does not exhibit a characteristic identified at Subpart C of this part, the following materials are not subject to regulation under Parts 260, 261 to 267, 268, or 100: (1) Hazardous debris as defined in Part 268 of these regulations that has been treated using one of the required extraction or destruction technologies specified in Table 1 of § 268.45 of these regulations; persons claiming this exclusion in an enforcement action will have the burden of proving by clear and convincing evidence that the material meets all of the exclusion requirements; or (2) Debris as defined in Part 268 of these regulations that the Director, considering the extent of contamination, has determined is no longer contaminated with hazardous waste.

(g) (1) A hazardous waste that is listed in Subpart D of this part solely because it exhibits one or more characteristics of ignitability as defined under § 261.21, corrosivity as defined under § 261.22, or reactivity as defined under § 261.23 is not a hazardous waste, if the waste no longer exhibits any characteristic of hazardous waste identified in Subpart C of this part. (2) The exclusion described in paragraph (g)(1) of this section also pertains to: (i) Any mixture of a solid waste and a hazardous waste listed in Subpart D of this part solely because it exhibits the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (a)(2)(iv) of this section; and (ii) Any solid waste generated from treating, storing, or disposing of a hazardous waste listed in Subpart D of this part solely because it exhibits the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (c)(2)(i) of this section.

(3) Wastes excluded under this section are subject to Part 268 of these regulations (as applicable), even if they no longer exhibit a characteristic at the point of land disposal. (4) Any mixture of a solid waste excluded from regulation under § 261.4(b)(7) and a hazardous waste listed in subpart D of this part solely because it exhibits one or more of the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (a)(2)(iv) of this section is not a hazardous waste, if the mixture no longer exhibits any characteristic of hazardous waste identified in Subpart C of this part for which the hazardous waste listed in Subpart D of this part was listed. (h) Reserved § 261.4 Exclusions.

(a) Materials which are not solid wastes. The following materials are not solid wastes for the purpose of this Part:

(1) (i) Domestic sewage; and (ii) Any mixture of domestic sewage and other wastes that passes through a sewer system to a publicly owned treatment works for treatment, except as prohibited by § 267.505 and Clean Water Act requirements at 40 CFR § 403.5(b). "Domestic sewage" means untreated sanitary wastes that pass through a sewer system.

13 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (2) Industrial wastewater discharges that are point source discharges subject to regulation under Section 402 of the Clean Water Act, as amended.

(3) Irrigation return flows.

(4) Source, special nuclear or by-product material as defined by the Atomic Energy Act of 1954, as amended, 42 U.S.C. 2011 et seq.

(5) Materials subjected to in-situ mining techniques which are not removed from the ground as part of the extraction process.

(6) Inert materials deposited for construction fill or topsoil placement in connection with actual or contemplated construction at such location or for changes in land contour for agricultural and mining purposes, if such depositing does not fall within the definition of treatment, storage, or disposal of hazardous waste.

(7) Pulping liquors (i.e., black liquor) that are reclaimed in a pulping liquor recovery furnace and then reused in the pulping process, unless it is accumulated speculatively as defined in § 261.1(c) of these regulations;

(8) Secondary materials that are reclaimed and returned to the original process or processes in which they were generated where they are reused in the production process provided: (i) Only tank storage is involved, and the entire process through completion of reclamation is closed by being entirely connected with pipes or other comparable enclosed means of conveyance;

(ii) Reclamation does not involve controlled flame combustion (such as occurs in boilers, industrial furnaces, or incinerators);

(iii) The secondary materials are never accumulated in such tanks for over twelve months without being reclaimed; and (iv) The reclaimed material is not used to produce a fuel, or used to produce products that are used in a manner constituting disposal. (9) Spent sulfuric acid used to produce virgin sulfuric acid, provided it is not accumulated speculatively as defined in § 261.1(c) of these regulations. (10) (i) Spent wood preserving solutions that have been used and are reclaimed and are reused for their original intended purpose; and (ii) Wastewaters from the wood preserving process that have been reclaimed and are reused to treat wood.

(iii) Prior to reuse, the wood preserving wastewaters and spent wood preserving solutions described in paragraphs (a)(10)(i) and (a)(10)(ii) of this section, so long as they meet all of the following conditions:

(A) The wood preserving wastewaters and spent wood preserving solutions are reused on-site at water borne plants in the production process for their original intended purpose;

(B) Prior to reuse, the wastewaters and spent wood preserving solutions are managed to prevent release to either land or groundwater or both; 14 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (C) Any unit used to manage wastewaters and/or spent wood preserving solutions prior to reuse can be visually or otherwise determined to prevent such releases;

(D) Any drip pad used to manage the wastewaters and/or spent wood preserving solutions prior to reuse complies with the standards in Part 265, Subpart W of these regulations, regardless of whether the plant generates a total of less than 100 kg/month of hazardous waste; and (E) Prior to operating pursuant to this exclusion, the plant owner or operator prepares a one-time notification stating that the plant intends to claim the exclusion, giving the date on which the plant intends to begin operating under the exclusion, and containing the following language: “I have read the applicable regulation establishing an exclusion for wood preserving wastewaters and spent wood preserving solutions and understand it requires me to comply at all times with the conditions set out in the regulation.” The plant must maintain a copy of that document in its on- site records until closure of the facility. The exclusion applies only so long as the plant meets all of the conditions. If the plant goes out of compliance with any condition, it may apply to the appropriate Regional Administrator or State Director for reinstatement. The Regional Administrator or State Director may reinstate the exclusion upon finding that the plant has returned to compliance with all conditions and that violations are not likely to recur.

(11) EPA Hazardous Waste Nos. K060, K087, K141, K142, K143, K144, K145, K147, and K148, and any wastes from the coke by-products processes that are hazardous only because they exhibit the Toxicity Characteristic (TC) specified in § 261.24 of this part, when, subsequent to generation, these materials are recycled to coke ovens, to the tar recovery process as a feedstock to produce coal tar, or mixed with coal tar prior to the sale or refining of the tar. This exclusion is conditioned on there being no land disposal of the wastes from the point at which they are generated to the point at which they are recycled to coke ovens or tar recovery or refining processes, or mixed with coal tar. (12) Nonwastewater splash condenser dross residue from the treatment of K061 in high temperature metals recovery units, provided it is shipped in drums (if shipped) and not land disposed before recovery.

(13) (i) Oil-bearing hazardous secondary materials (i.e., sludges, byproducts, or spent materials) that are generated at a petroleum refinery (SIC code 2911) and are inserted into the petroleum refining process (SIC code 2911-including, but not limited to, distillation, catalytic cracking, fractionation, or thermal cracking units (i.e., cokers)) unless the material is placed on the land, or speculatively accumulated before being so recycled. Materials inserted into thermal cracking units are excluded under this paragraph, provided that the coke product also does not exhibit a characteristic of hazardous waste. Oil-bearing hazardous secondary materials may be inserted into the same petroleum refinery where they are generated, or sent directly to another petroleum refinery, and still be excluded under this provision. Except as provided in paragraph (a)(13)(ii) of this section, oil-bearing hazardous secondary materials generated elsewhere in the petroleum industry (i.e., from sources other than petroleum refineries) are not excluded under this section. Residuals generated from processing or recycling materials excluded under this paragraph (a)(13)(i), where such materials as generated would have otherwise met a listing under Subpart D of this part, are designated as F037 listed wastes when disposed of or intended for disposal.

15 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (ii) Recovered oil that is recycled in the same manner and with the same conditions as described in paragraph (a)(13)(i) of this section. Recovered oil is oil that has been reclaimed from secondary materials (including wastewater) generated from normal petroleum industry practices, including refining, exploration and production, bulk storage, and transportation incident thereto (SIC codes 1311, 1321, 1381, 1382, 1389, 2911, 4612, 4613, 4922, 4923, 4789, 5171, and 5172.) Recovered oil does not include oil-bearing hazardous wastes listed in Subpart D of this part; however, oil recovered from such wastes may be considered recovered oil. Recovered oil does not include used oil as defined in § 279.1 of these regulations.

(14) Excluded scrap metal (processed scrap metal, unprocessed home scrap metal, and unprocessed prompt scrap metal) being recycled.

(15) Shredded circuit boards being recycled provided that they are: (i) Stored in containers sufficient to prevent a release to the environment prior to recovery; and (ii) Free of mercury switches, mercury relays and nickel-cadmium batteries and lithium batteries.

(16) Reserved (17) Spent materials (as defined in § 261.1) (other than hazardous wastes listed in Subpart D of this part) generated within the primary mineral processing industry from which minerals, acids, cyanide, water or other values are recovered by mineral processing or by beneficiation, provided that:

(i) The spent material is legitimately recycled to recover minerals, acids, cyanide, water or other values;

(ii) The spent material is not accumulated speculatively; (iii) Except as provided in paragraph (a)(17)(iv) of this section, the spent material is stored in tanks, containers, or buildings meeting the following minimum integrity standards: a building must be an engineered structure with a floor, walls, and a roof all of which are made of non-earthen materials providing structural support (except smelter buildings may have partially earthen floors provided the spent material is stored on the non-earthen portion), and have a roof suitable for diverting rainwater away from the foundation; a tank must be free standing, not be a surface impoundment (as defined in § 260.10 of these regulations), and be manufactured of a material suitable for containment of its contents; a container must be free standing and be manufactured of a material suitable for containment of its contents. If tanks or containers contain any particulate which may be subject to wind dispersal, the owner/operator must operate these units in a manner which controls fugitive dust. Tanks, containers, and buildings must be designed, constructed and operated to prevent significant releases to the environment of these materials.

16 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (iv) The Regional Administrator or the State Director may make a site-specific determination, after public review and comment, that only solid mineral processing spent material may be placed on pads, rather than in tanks, containers, or buildings. Solid mineral processing spent materials do not contain any free liquid. The decision-maker must affirm that pads are designed, constructed and operated to prevent significant releases of the spent material into the environment. Pads must provide the same degree of containment afforded by the non-RCRA tanks, containers and buildings eligible for exclusion. (A) The decision-maker must also consider if storage on pads poses the potential for significant releases via groundwater, surface water, and air exposure pathways. Factors to be considered for assessing the groundwater, surface water, air exposure pathways are: the volume and physical and chemical properties of the spent material, including its potential for migration off the pad; the potential for human or environmental exposure to hazardous constituents migrating from the pad via each exposure pathway, and the possibility and extent of harm to human and environmental receptors via each exposure pathway. (B) Pads must meet the following minimum standards: be designed of non- earthen material that is compatible with the chemical nature of the mineral processing spent material, capable of withstanding physical stresses associated with placement and removal, have run on/runoff controls, be operated in a manner which controls fugitive dust, and have integrity assurance through inspections and maintenance programs. (C) Before making a determination under this paragraph, the Regional Administrator or State Director must provide notice and the opportunity for comment to all persons potentially interested in the determination. This can be accomplished by placing notice of this action in major local newspapers, or broadcasting notice over local radio stations. (v) The owner or operator provides notice to the Regional Administrator or State Director, providing the following information: the types of materials to be recycled; the type and location of the storage units and recycling processes; and the annual quantities expected to be placed in land-based units. This notification must be updated when there is a change in the type of materials recycled or the location of the recycling process.

(vi) For purposes of § 261.4(b)(7) of this section, mineral processing spent material must be the result of mineral processing and may not include any listed hazardous wastes. Listed hazardous wastes and characteristic hazardous wastes generated by non-mineral processing industries are not eligible for the conditional exclusion from the definition of solid waste. (18) Petrochemical recovered oil from an associated organic chemical manufacturing facility, where the oil is to be inserted into the petroleum refining process (SIC code 2911) along with normal petroleum refinery process streams, provided: (i) The oil is hazardous only because it exhibits the characteristic of ignitability (as defined in § 261.21) and/or toxicity for benzene (§ 261.24, waste code D018); and 17 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (ii) The oil generated by the organic chemical manufacturing facility is not placed on the land, or speculatively accumulated before being recycled into the petroleum refining process. An “associated organic chemical manufacturing facility” is a facility where the primary SIC code is 2869, but where operations may also include SIC codes 2821,2822, and 2865; and is physically co-located with a petroleum refinery; and where the petroleum refinery to which the oil being recycled is returned also provides hydrocarbon feedstocks to the organic chemical manufacturing facility. “Petrochemical recovered oil” is oil that has been reclaimed from secondary materials (i.e., sludges, byproducts, or spent materials, including wastewater) from normal organic chemical manufacturing operations, as well as oil recovered from organic chemical manufacturing processes.

(19) Spent caustic solutions from petroleum refining liquid treating processes used as a feedstock to produce cresylic or naphthenic acid unless the material is placed on the land, or accumulated speculatively as defined in § 261.1(c). (20) Hazardous secondary materials used to make zinc fertilizers, provided that the following conditions specified are satisfied:

(i) Hazardous secondary materials used to make zinc micronutrient fertilizers must not be accumulated speculatively, as defined in § 261.1(d)(8). (ii) Generators and intermediate handlers of zinc-bearing hazardous secondary materials that are to be incorporated into zinc fertilizers must: (A) Submit a one-time notice to the Regional Administrator or State Director in whose jurisdiction the exclusion is being claimed, which contains the name, address and EPA ID number of the generator or intermediate handler facility, provides a brief description of the secondary material that will be subject to the exclusion, and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary materials under the conditions specified in this paragraph (a)(20). (B) Store the excluded secondary material in tanks, containers, or buildings that are constructed and maintained in a way that prevents releases of the secondary materials into the environment At a minimum, any building used for this purpose must be an engineered structure made of non- earthen materials that provide structural support, and must have a floor, walls and a roof that prevent wind dispersal and contact with rainwater. Tanks used for this purpose must be structurally sound and, if outdoors, must have roofs or covers that prevent contact with wind and rain. Containers used for this purpose must be kept closed except when it is necessary to add or remove material, and must be in sound condition. Containers that are stored outdoors must be managed within storage areas that:

(1) have containment structures or systems sufficiently impervious to contain leaks, spills and accumulated precipitation; and (2) provide for effective drainage and removal of leaks, spills and accumulated precipitation; and (3) prevent run-on into the containment system.

18 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (C) With each off-site shipment of excluded hazardous secondary materials, provide written notice to the receiving facility that the material is subject to the conditions of this paragraph (a)(20).

(D) Maintain at the generator’s or intermediate handlers’s facility for no less than three years records of all shipments of excluded hazardous secondary materials. For each shipment these records must at a minimum contain the following information:

(1) Name of the transporter and date of the shipment;

(2) Name and address of the facility that received the excluded material, and documentation confirming receipt of the shipment; and (3) Type and quantity of excluded secondary material in each shipment.

(iii) Manufacturers of zinc fertilizers or zinc fertilizer ingredients made from excluded hazardous secondary materials must:

(A) Store excluded hazardous secondary materials in accordance with the storage requirements for generators and intermediate handlers, as specified in paragraph (a)(20)(ii)(B) of this section.

(B) Submit a one-time notification to the Regional Administrator or State Director that, at a minimum, specifies the name, address and EPA ID number of the manufacturing facility, and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary materials under the conditions specified in this paragraph (a)(20).

(C) Maintain for a minimum of three years records of all shipments of excluded hazardous secondary materials received by the manufacturer, which must at a minimum identify for each shipment the name and address of the generating facility, name of transporter and date the materials were received, the quantity received, and a brief description of the industrial process that generated the material.

(D) Submit to the Regional Administrator or State Director an annual report that identifies the total quantities of all excluded hazardous secondary materials that were used to manufacture zinc fertilizers or zinc fertilizer ingredients in the previous year, the name and address of each generating facility, and the industrial process(s) from which they were generated.

(iv) Nothing in this section preempts, overrides or otherwise negates the provision in § 262.11 of these regulations, which requires any person who generates a solid waste to determine if that waste is a hazardous waste.

19 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (v) Interim status and permitted storage units that have been used to store only zinc- bearing hazardous wastes prior to the submission of the one-time notice described in paragraph (a)(20)(ii)(A) of this section, and that afterward will be used only to store hazardous secondary materials excluded under this paragraph, are not subject to the closure requirements of Parts 264 and 265 of these regulations.

(21) Zinc fertilizers made from hazardous wastes, or hazardous secondary materials that are excluded under paragraph (a)(20) of this section, provided that: (i) The fertilizers meet the following contaminant limits: (A) For metal contaminants:

Metal Constituent Maximum allowable total concentration in fertilizer, per unit (1%) of zinc content Arsenic.................................... 0.3 ppm Cadmium................................ 1.4 ppm Chromium............................... 0.6 ppm Lead........................................ 2.8 ppm Mercury................................... 0.3 ppm (B) For dioxin contaminants the fertilizer must contain no more than eight (8) parts per trillion of dioxin, measured as toxic equivalent (TEQ). (ii) The manufacturer performs sampling and analysis of the fertilizer product to determine compliance with the contaminant limits for metals no less than every six months, and for dioxins no less than every twelve months. Testing must also be performed whenever changes occur to manufacturing processes or ingredients that could significantly affect the amounts of contaminants in the fertilizer product. The manufacturer may use any reliable analytical method to demonstrate that no constituent of concern is present in the product at concentrations above the applicable limits. It is the responsibility of the manufacturer to ensure that the sampling and analysis are unbiased, precise, and representative of the product(s) introduced into commerce. (iii) The manufacturer maintains for no less than three years records of all sampling and analyses performed for purposes of determining compliance with the requirements of paragraph (a)(21)(ii) of this section. Such records must at a minimum include:

(A) The dates and times product samples were taken, and the dates the samples were analyzed;

(B) The names and qualifications of the person(s) taking the samples; (C) A description of the methods and equipment used to take the samples; (D) The name and address of the laboratory facility at which analyses of the samples were performed;

(E) A description of the analytical methods used, including any cleanup and sample preparation methods; and 20 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (F) All laboratory analytical results used to determine compliance with the contaminant limits specified in this paragraph (a)(21). (b) Solid wastes which are not hazardous wastes. The following solid wastes are not hazardous wastes:

(1) Household waste, including household waste that has been collected, transported, stored, treated, disposed, recovered (e.g., refuse-derived fuel) or reused. “Household waste” means any waste material (including garbage, trash and sanitary wastes in septic tanks) derived from households (including single and multiple residences, hotels and motels, bunkhouses, ranger stations, crew quarters, campground, picnic grounds and day-use recreation areas.) A resource recovery facility managing municipal solid waste shall not be deemed to be treating, storing, disposing of, or otherwise managing hazardous wastes for purposes of regulation under this subtitle, if such facility: (i) Receives and burns only (A) Household waste (from single and multiple dwellings, hotels, motels, and other residential sources) and (B) Solid waste from commercial or industrial sources that does not contain hazardous waste; and (ii) Such facility does not accept hazardous wastes and the owner or operator of such facility has established contractual requirements or other appropriate notification or inspection procedures to assure that hazardous wastes are not received at or burned in such facility.

(2) Solid wastes generated by any of the following and which are returned to the soils as fertilizers:

(i) The growing and harvesting of agricultural crops.

(ii) The raising of animals, including animal manures.

(3) Mining overburden returned to the mine site.

(4) Fly ash waste, bottom ash waste, slag waste, and flue gas emission control waste generated primarily from the combustion of coal or other fossil fuels, except as provided by § 264.347 of these regulations for faculties that burn or process hazardous waste. (5) Drilling fluids, produced waters, and other wastes associated with the exploration, development, or production of crude oil, natural gas or geothermal energy. (6) (i) Wastes which fail the test for the Toxicity Characteristic because chromium is present or are listed in Subpart D due to the presence of chromium, which do not fail the test for the Toxicity Characteristic for any other constituent or are not listed due to the presence of any other constituent, and which do not fail the test for any other characteristic, if it is shown by a waste generator or by waste generators that: (A) The chromium in the waste is exclusively (or nearly exclusively) trivalent chromium; and 21 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (B) The waste is generated from an industrial process which uses trivalent chromium exclusively (or nearly exclusively) and the process does not generate hexavalent chromium; and (C) The waste is typically and frequently managed in non-oxidizing environments.

(ii) Specific wastes which meet the standard in paragraphs (b)(6)(i)(A),(B) and (C) (so long as they do not fail the test for the Toxicity Characteristic for any other constituent, and do not exhibit any other characteristic) are: (A) Chrome (blue) trimmings generated by the following subcategories of the leather tanning and finishing industry; hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.

(B) Chrome (blue) shavings generated by the following subcategories of the leather tanning and finishing industry: hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.

(C) Buffing dust generated by the following subcategories of the leather tanning and finishing industry, hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue.

(D) Sewer screenings generated by the following subcategories of the leather tanning and finishing industry: hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.

(E) Wastewater treatment sludges generated by the following subcategories of the leather tanning and finishing industry, hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.

(F) Wastewater treatment sludges generated by the following subcategories of the leather tanning and finishing industry: hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; and through- the-blue.

(G) Waste scrap leather from the leather tanning industry, the shoe manufacturing industry, and other leather product manufacturing industries.

(H) Wastewater treatment sludges from the production of TiO2 pigment using chromium-bearing ores by the chloride process.

(7) Solid waste from the extraction, beneficiation and processing of ores and minerals (including coal, phosphate rock and overburden from the mining of uranium ore), except as provided by § 264.347 of these regulations for facilities that burn or process hazardous waste.

22 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (i) For purposes of § 261.4(b)(7) beneficiation of ores and minerals is restricted to the following activities: crushing; grinding; washing; dissolution; crystallization; filtration; sorting; sizing; drying; sintering; pelletizing; briquetting; calcining to remove water and/or carbon dioxide; roasting, autoclaving, and/or chlorination in preparation for leaching (except where the roasting (and/or autoclaving and/or chlorination)/leaching sequence produces a final or intermediate product that does not undergo further beneficiation or processing); gravity concentration; magnetic separation; electrostatic separation; flotation; ion exchange; solvent extraction; electrowinning; precipitation; amalgamation; and heap, dump, vat, tank, and in situ leaching.

(ii) For the purposes of § 261.4(b)(7), solid waste from the processing of ores and minerals includes only the following wastes as generated: (A) Slag from primary copper processing;

(B) Slag from primary lead processing;

(C) Red and brown muds from bauxite refining;

(D) Phosphogypsum from phosphoric acid production;

(E) Slag from elemental phosphorus production;

(F) Gasifier ash from coal gasification;

(G) Process wastewater from coal gasification;

(H) Calcium sulfate wastewater treatment plant sludge from primary copper processing;

(I) Slag tailings from primary copper processing;

(J) Fluorogypsum from hydrofluoric acid production;

(K) Process wastewater from hydrofluoric acid production; (L) Air pollution control dust/sludge from iron blast furnaces; (M) Iron blast furnace slag;

(N) Treated residue from roasting/leaching of chrome ore; (O) Process wastewater from primary magnesium processing by the anhydrous process;

(P) Process wastewater from phosphoric acid production; (Q) Basic oxygen furnace and open hearth furnace air pollution control dust/sludge from carbon steel production;

(R) Basic oxygen furnace and open hearth furnace slag from carbon steel production;

(S) Chloride process waste solids from titanium tetrachloride production; 23 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (T) Slag from primary zinc processing.

(iii) A residue derived from co-processing mineral processing secondary materials with normal beneficiation raw materials or with normal mineral processing raw materials remains excluded under paragraph (b) of this section if the owner or operator:

(A) Processes at least 50 percent by weight normal beneficiation raw materials or normal mineral processing raw materials; and (B) Legitimately reclaims the secondary mineral processing materials. (8) Cement kiln dust waste, except as provided by § 264.347 of these regulations for facilities that burn or process hazardous waste.

(9) Solid waste which consists of discarded arsenical-treated wood or wood products which fails the test for the Toxicity Characteristic for Hazardous Waste Codes D004 through D017 and which is not a hazardous waste for any other reason if the waste is generated by persons who utilize the arsenical-treated wood and wood products for these materials’ intended end use.

(10) Petroleum-contaminated media and debris that fail the test for the Toxicity Characteristic of § 261.24 (Hazardous Waste Codes D018 through D043 only) and are subject to the corrective action regulations under 40 CFR Part 280.

(11) RESERVED (12) Used chlorofluorocarbon refrigerants from totally enclosed heat transfer equipment, including mobile air conditioning systems, mobile refrigeration, and commercial and industrial air conditioning and refrigeration systems that use chlorofluorocarbons as the heat transfer fluid in a refrigeration cycle, provided the refrigerant is reclaimed for further use.

(13) Non-terne plated used oil filters that are not mixed with wastes listed in Subpart D of this part if these oil filters have been gravity hot-drained using one of the following methods: (i) Puncturing the filter anti-drain back valve or the filter dome end and hot-draining; (ii) Hot-draining and crushing;

(iii) Dismantling and hot-draining; or (iv) Any other equivalent hot-draining method which will remove used oil. (14) Used oil re-refining distillation bottoms that are used as feedstock to manufacture asphalt products.

(15) Leachate or gas condensate collected from landfills where certain solid wastes have been disposed, provided that:

(i) The solid wastes disposed would meet one or more of the listing descriptions for Hazardous Waste Codes K169, K170, K171, K172, K174, K175, K176, K177, K178 and K181 if these wastes had been generated after the effective date of the listing;

24 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (ii) The solid wastes described in paragraph (b)(15)(i) of this section were disposed prior to the effective date of the listing;

(iii) The leachate or gas condensate do not exhibit any characteristic of hazardous waste nor are derived from any other listed hazardous waste; (iv) Discharge of the leachate or gas condensate, including leachate or gas condensate transferred from the landfill to a POTW by truck, rail, or dedicated pipe, is subject to regulation under sections 307(b) or 402 of the Clean Water Act.

(v) As of February 13, 2001, leachate or gas condensate derived from K169-K172 is no longer exempt if it is stored or managed in a surface impoundment prior to discharge. As of November 21, 2003, leachate or gas condensate derived from K176, K177, and K178 is no longer exempt if it is stored or managed in a surface impoundment prior to discharge. After February 26, 2007, leachate or gas condensate derived from K181 will no longer be exempt if it is stored or managed in a surface impoundment prior to discharge. There is one exception: if the surface impoundment is used to temporarily store leachate or gas condensate in response to an emergency situation (e.g., shutdown of wastewater treatment system), provided the impoundment has a double liner, and provided the leachate or gas condensate is removed from the impoundment and continues to be managed in compliance with the conditions of this paragraph (b)(15)(v) after the emergency ends.

(c) Hazardous wastes which are exempted from certain regulations. A hazardous waste which is generated in a product or raw material storage tank, a product or raw material transport vehicle or vessel, a product or raw material pipeline, or in a manufacturing process unit or an associated non-waste-treatment-manufacturing unit, is not subject to regulation under Parts 262 through 266, Part 268 and Part 100 or to the notification requirements of Part 99 of these regulations until it exits the unit in which it was generated, unless the unit is a surface impoundment, or unless the hazardous waste remains in the unit more than 90 days after the unit ceases to be operated for manufacturing, or for storage or transportation of product or raw materials. (d) Samples.

(1) Except as provided in paragraphs (d)(2) and (4) of this section, a sample of solid waste or a sample of water, soil, or air, which is collected for the sole purpose of testing to determine its characteristics or composition, is not subject to any requirements of this part or Parts 262 through 266, Part 268 or Part 100 or to the notification requirements of Part 99 of these regulations when:

(i) The sample is being transported to a laboratory for the purpose of testing: or (ii) The sample is being transported back to the sample collector after testing; or (iii) The sample is being stored by the sample collector before transport to a laboratory for testing; or (iv) The sample is being stored in a laboratory before testing; or (v) The sample is being stored in a laboratory after testing but before it is returned to the sample collector; or 25 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (vi) The sample is being stored temporarily in the laboratory after testing for a specific purpose (for example, until conclusion of a court case or enforcement action where further testing of the sample may be necessary) (2) In order to qualify for the exemption in paragraph (d)(1)(i) and (ii) of this section, a sample collector shipping samples to a laboratory and laboratory returning samples to a sample collector must:

(i) Comply with U.S. Department of Transportation (DOT), U.S. Postal Service (USPS), or any other applicable shipping requirements; or (ii) Comply with the following requirements if the sample collector determines that DOT, USPS, or other shipping requirements do not apply to the shipment of the sample:

(A) Assure that the following information accompanies the sample: (1) The sample collector’s name, mailing address, and telephone number;

(2) The laboratory’s name, mailing address, and telephone number; (3) The quantity of the sample;

(4) The date of shipment; and (5) A description of the sample.

(B) Package the sample so that it does not leak, spill, or vaporize from its packaging.

(3) This exemption does not apply if the laboratory determines that the waste is hazardous but the laboratory is no longer meeting any of the conditions stated in paragraph (d)(1) of this section.

(4) In order to qualify for the exemption in paragraphs (d)(1)(i) and (ii) of this section, the mass of a sample that will be exported to a foreign laboratory or that will be imported to a U.S. laboratory from a foreign source must additionally not exceed 25 kg. (e) Treatability Study Samples.

(1) Except as provided in paragraphs (e)(2) and (e)(4) of this section, persons who generate or collect samples for the purpose of conducting treatability studies as defined in § 260.10, are not subject to any requirement of Parts 261 through 263 of these regulations or to the notification requirements of Section 99 of the Colorado Hazardous Waste Regulations, nor are such samples included in the quantity determinations of § 262.13 when:

(i) The sample is being collected and prepared for transportation by the generator or sample collector; or (ii) The sample is being accumulated or stored by the generator or sample collector prior to transportation to a laboratory or testing facility; or 26 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (iii) The sample is being transported to the laboratory or testing facility for the purpose of conducting a treatability study.

(2) The exemption in paragraph (e)(1) of this section is applicable to samples of hazardous waste being collected and shipped for the purpose of conducting treatability studies provided that:

(i) The generator or sample collector uses (in “treatability studies”) no more than 10,000 kg of media contaminated with non-acute hazardous waste, 1000 kg of non-acute hazardous waste other than contaminated media, 1 kg of acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste for each process being evaluated for each generated waste stream; and (ii) The mass of each sample shipment does not exceed 10,000 kg; the 10,000 kg quantity may be all media contaminated with non-acute hazardous waste, or may include 2500 kg of media contaminated with acute hazardous waste, 1000 kg of hazardous waste, and 1 kg of acute hazardous waste; and (iii) The sample must be packaged so that it will not leak, spill, or vaporize from its packaging during shipment and the requirements of paragraph A or B of this subparagraph are met.

(A) The transportation of each sample shipment complies with U.S. Department of Transportation (DOT), U.S. Postal Service (USPS), or any other applicable shipping requirements; or (B) If the DOT, USPS, or other shipping requirements do not apply to the shipment of the sample, the following information must accompany the sample:

(1) The name, mailing address, and telephone number of the originator of the sample;

(2) The name, address, and telephone number of the facility that will perform the treatability study;

(3) The quantity of the sample;

(4) The date of shipment; and (5) A description of the sample, including its EPA Hazardous Waste Number.

(iv) The sample is shipped to a laboratory or testing facility which is exempt under § 261.4(f) or has an appropriate RCRA permit or interim status. (v) The generator or sample collector maintains the following records for a period ending 3 years after completion of the treatability study: (A) Copies of the shipping documents;

(B) A copy of the contract with the facility conducting the treatability study; (C) Documentation showing:

27 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (1) The amount of waste shipped under this exemption;

(2) The name, address, and EPA identification number of the laboratory or testing facility that received the waste; (3) The date the shipment was made; and (4) Whether or not unused samples and residues were returned to the generator.

(vi) The generator reports the information required under paragraph (e)(2)(v)(C) of this section in its biennial report.

(3) The Director may grant requests on a case-by-case basis for up to an additional two years for treatability studies involving bioremediation. The Director may grant requests on a case-by-case basis for quantity limits in excess of those specified in paragraphs (e)(2)(i) and (ii) and (f)(4) of this section, for up to an additional 5000 kg of media contaminated with non-acute hazardous waste, 500 kg of non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste and 1 kg of acute hazardous waste:

(i) In response to requests for authorization to ship, store and conduct treatability studies on additional quantities in advance of commencing treatability studies. Factors to be considered in reviewing such requests include the nature of the technology, the type of process (e.g., batch versus continuous), size of the unit undergoing testing (particularly in relation to scale-up considerations), the time/quantity of material required to reach steady state operating conditions, or test design considerations such as mass balance calculations. (ii) In response to requests for authorization to ship, store and conduct treatability studies on additional quantities after initiation or completion of initial treatability studies, when: There has been an equipment or mechanical failure during the conduct of a treatability study, there is a need to verify the results of a previously conducted treatability study, there is a need to study and analyze alternative techniques within a previously evaluated treatment process; or there is a need to do further evaluation of an ongoing treatability study to determine final specifications for treatment.

(iii) The additional quantities and timeframes allowed in paragraph (e)(3)(i) and (ii) of this section are subject to all the provisions in paragraphs (e)(1) and (e)(2) (iii) through (vi) of this section. The generator or sample collector must apply to the Director and provide in writing the following information: (A) The reason why the generator or sample collector requires additional time or quantity of sample for treatability study evaluation and the additional time or quantity needed;

(B) Documentation accounting for all samples of hazardous waste from the waste stream which have been sent for or undergone treatability studies including the date each previous sample from the waste stream was shipped, the quantity of each previous shipment; the laboratory or testing facility to which it was shipped, what treatability study processes were conducted on each sample shipped, and the available results on each treatability study;

28 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (C) A description of the technical modifications or change in specifications which will be evaluated and the expected results;

(D) If such further study is being required due to equipment or mechanical failure, the applicant must include information regarding the reason for the failure or breakdown and also include what procedures or equipment improvements have been made to protect against further breakdowns; and (E) Such other information that the Director considers necessary. (4) In order to qualify for the exemption in paragraph (e)(1)(i) of this section, the mass of a sample that will be exported to a foreign laboratory or testing facility, or that will be imported to a U.S. laboratory or testing facility from a foreign source must additionally not exceed 25 kg.

(f) Samples Undergoing Treatability Studies at Laboratories and Testing Facilities. Samples undergoing treatability studies and the laboratory or testing facility conducting such treatability studies (to the extent such facilities are not otherwise subject to Colorado Hazardous Waste Act requirements) are not subject to any requirement of Parts 261 through 268, and Part 100, or to the notification requirements of Part 99 of the Colorado Hazardous Waste Regulations provided that the conditions of paragraphs (f)(1) through (14) of this section are met. A mobile treatment unit (MTU) may qualify as a testing facility subject to paragraphs (f)(1) through (14) of this section. Where a group of MTUs are located at the same site, the limitations specified in (f)(1) through (14) of this section apply to the entire group of MTUs collectively as if the group were one MTU.

(1) No less than 45 days before conducting treatability studies, or receiving samples of hazardous waste to be used in treatability studies, the testing facility submits the following information in writing to the Director, Hazardous Materials and Waste Management Division, Colorado Department of Public Health and Environment: (A) Facility name, location, and mailing address;

(B) Facility EPA ID number;

(C) Facility contact person, title, and phone;

(D) Whether or not the facility has ever submitted a Part A or Part B application;

(E) A list of existing environmental permits held by the facility; (F) The general nature of the facility operation;

(2) The laboratory or testing facility conducting the treatability study obtains an EPA identification number prior to receiving waste samples or conducting treatability studies. (3) No more than a total of 10,000 kg of “as received” media contaminated with non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste or 250 kg of other “as received” hazardous waste is subject to initiation of treatment in all treatability studies in any single day. “As received” waste refers to the waste as received in the shipment from the generator or sample collector.

29 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (4) The quantity of “as received” hazardous waste stored at the facility for the purpose of evaluation in treatability studies does not exceed 10,000 kg, the total of which can include 10,000 kg of media contaminated with non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste, 1000 kg of non-acute hazardous wastes other than contaminated media, and 1 kg of acute hazardous waste. This quantity limitation does not include treatment materials (including nonhazardous solid waste) added to “as received” hazardous waste.

(5) Storage of waste samples and treatability study residues must meet the following minimum conditions:

(i) Wastes must be stored and managed in a way to prevent any release into the environment and must not pose a human health hazard.

(ii) Any waste material spilled or released must be contained, collected, and disposed of properly within 24 hours.

(iii) Container storage areas must be designed and operated such that: (A) Containers or liners are compatible with the stored waste; (B) Containers are protected from any standing liquids; (C) Containers remain closed except when it is necessary to add or remove waste;

(D) Contents of containers which are leaking or in poor condition must be transferred to a container in good condition or otherwise properly managed.

(iv) Tank systems must be designed and operated such that: (A) The tank system integrity is sufficient to ensure that the tank will not leak, collapse, rupture, or fail while containing waste;

(B) Any release is detected, contained, collected and removed within 24 hours;

(C) Appropriate controls and practices are in place to prevent spills and overflows.

(v) Ignitable and reactive waste must be protected from any material or conditions that may cause the waste to ignite or react.

(vi) Contact between incompatible wastes must be prevented. (6) No more than 90 days have elapsed since the treatability study for the sample was completed, or no more than one year (two years for treatability studies involving bioremediation) have elapsed since the generator or sample collector shipped the sample to the laboratory or testing facility, whichever date first occurs. Up to 500 kg of treated material from a particular waste stream from treatability studies may be archived for future evaluation up to five years from the date of initial receipt. Quantities of materials archived are counted against the total storage limit for the facility. 30 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (7) The treatability study does not involve the placement of hazardous waste on the land or open burning of hazardous waste.

(8) The facility maintains records for 3 years following completion of each study that show compliance with the treatment rate limits and the storage time and quantity limits. The following specific information must be included for each treatability study conducted: (i) The name, address, and EPA identification number of the generator and the name of the sample collector of each waste sample;

(ii) The date the shipment was received;

(iii) The quantity of waste accepted;

(iv) The quantity of “as received” waste in storage each day; (v) The date the treatment study was initiated and the amount of “as received” waste introduced to treatment each day, (vi) The date the treatability study was concluded;

(vii) The date any unused sample or residues generated from the treatability study were returned to the generator or sample collector or, if sent to a designated facility, the name of the facility and the EPA identification number. (9) The facility keeps, on-site, a copy of the treatability study contract and all shipping papers associated with the transport of treatability study samples to and from the facility for a period ending 3 years from the completion date of each treatability study. (10) The facility prepares and submits a report to the Director by March 15 of each year that estimates the number of studies and the amount of waste expected to be used in treatability studies during the current year, and includes the following information for the previous calendar year:

(i) The name, address, and EPA identification number of the facility conducting the treatability studies;

(ii) The types (by process) of treatability studies conducted; (iii) The names and addresses of persons for whom studies have been conducted (including their EPA identification numbers);

(iv) The total quantity of waste in storage each day;

(v) The quantity and types of waste subjected to treatability studies; (vi) When each treatability study was conducted;

(vii) The final disposition of residues and unused sample from each treatability study; (viii) A summary of spills or releases of waste material to the environment. 31 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (11) The facility determines whether any unused sample or residues generated by the treatability study are hazardous waste under § 261.3 and, if so, are subject to Parts 261 through 268, and Part 100 of these regulations, and all applicable Federal regulations under HSWA, unless the residues and unused samples are returned to the sample originator under the § 261.4(e) exemption.

(12) The facility notifies the Director by letter when the facility is no longer planning to conduct any treatability studies at the site.

(13) The facility submits a certified statement to the Director specifying that all waste materials from treatability studies have been removed from the facility, and that no contamination remains on-site.

(14) The facility provides adequate personnel training to ensure facility regulatory compliance, effective emergency response, and prevent undue worker exposure to hazardous waste. (g) Dredged material that is not a hazardous waste. Dredged material that is subject to the requirements of a permit that has been issued under 404 of the Federal Water Pollution Control Act (33 U.S.C.1344) or section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (33 U.S.C. 1413) is not a hazardous waste. For this paragraph (g), the following definitions apply:

(1) The term dredged material has the same meaning as defined in 40 CFR 232.2; (2) The term permit means:

(i) A permit issued by the U.S. Army Corps of Engineers (Corps) or an approved State under section 404 of the Federal Water Pollution Control Act (33 U.S.C. 1344);

(ii) A permit issued by the Corps under section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (33 U.S.C. 1413); or (iii) In the case of Corps civil works projects, the administrative equivalent of the permits referred to in paragraphs (g)(2)(i) and (ii) of this section, as provided for in Corps regulations (for example, see 33 CFR 336.1, 336.2, and 337.6). (h) Reserved.

(i) Reserved.

(j) Airbag waste. (1) Airbag waste at the airbag waste handler or during transport to an airbag waste collection facility or designated facility is not subject to regulation under Parts 262 through 268, or Part 100 of these regulations, and is not subject to the notification requirements of Part 99 of these regulations provided that:

(i) The airbag waste is accumulated in a quantity of no more than 250 airbag modules or airbag inflators, for no longer than 180 days; (ii) The airbag waste is packaged in a container designed to address the risk posed by the airbag waste and labeled ‘‘Airbag Waste–Do Not Reuse’’; (iii) The airbag waste is sent directly to either:

32 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (A) An airbag waste collection facility in the United States under the control of a vehicle manufacturer or their authorized representative, or under the control of an authorized party administering a remedy program in response to a recall under the National Highway Traffic Safety Administration, or (B) A designated facility as defined in § 260.10 of these regulations; (iv) The transport of the airbag waste complies with all applicable U.S. Department of Transportation regulations in 49 CFR part 171 through 180 during transit. 49 CFR parts 171 through 180 are incorporated by reference to include those versions in effect as of the date this regulation was adopted, and does not include later amendments to the incorporated material. Materials incorporated by reference are available for public inspection during normal business hours from the Hazardous Materials and Waste Management Division, 4300 Cherry Creek Drive South, Denver, CO 80246. Copies may also be found at the Environmental Protection Agency through the Government Printing Office at https://www.govinfo.gov/app/collection/cfr/; and (v) The airbag waste handler maintains at the handler facility for no less than three (3) years records of all off-site shipments of airbag waste and all confirmations of receipt from the receiving facility. For each shipment, these records must, at a minimum, contain the name of the transporter and date of the shipment; name and address of receiving facility; and the type and quantity of airbag waste (i.e., airbag modules or airbag inflators) in the shipment. Confirmations of receipt must include the name and address of the receiving facility; the type and quantity of the airbag waste (i.e., airbag modules and airbag inflators) received; and the date which it was received. Shipping records and confirmations of receipt must be made available for inspection and may be satisfied by routine business records (e.g., electronic or paper financial records, bills of lading, copies of DOT shipping papers, or electronic confirmations of receipt).

(2) Once the airbag waste arrives at an airbag waste collection facility or designated facility, it becomes subject to all applicable hazardous waste regulations, and the facility receiving airbag waste is considered the hazardous waste generator for the purposes of the hazardous waste regulations and must comply with the requirements of Part 262 of these regulations.

(3) Reuse in vehicles of defective airbag modules or defective airbag inflators subject to a recall under the National Highway Traffic Safety Administration is considered sham recycling and prohibited under § 261.2(g) of these regulations. § 261.5 Reserved § 261.6 Requirements for recyclable materials.

(a) (1) Hazardous wastes that are recycled are subject to the requirements for generators, transporters, and storage facilities of paragraphs (b) and (c) of this section, except for the materials listed in paragraphs (a)(2) and (a)(3) of this section. Hazardous wastes that are recycled will be known as “recyclable materials.”

(2) The following recyclable materials are not subject to the requirements of this section but are regulated under Part 264, Subpart O; Part 265, Subpart H; Part 265, Subpart O; or Subparts C through M of Part 267 of these regulations and all applicable provisions in Parts 268 and 100 of these regulations:

33 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (i) Recyclable materials used in a manner constituting disposal (See Part 267, Subpart C);

(ii) Hazardous wastes burned for energy recovery in boilers and industrial furnaces that are not regulated under Subpart O of Part 264 or 265 of these regulations; (iii) Recyclable materials from which precious metals are reclaimed (see Part 267, Subpart F);

(iv) Spent lead acid batteries that are being reclaimed (see Part 267, Subpart G). (3) The following recyclable materials are not subject to regulation under Parts 262 through 268 or Part 100 of these regulations, and are not subject to the notification requirements of Part 99 of these regulations:

(i) Industrial ethyl alcohol that is reclaimed except that exports and imports of such recyclable materials must comply with the requirements of Part 262, Subpart H. (A) A person initiating a shipment for reclamation in a foreign country, and any intermediary arranging for the shipment, must comply with the requirements applicable to a primary exporter in § § 262.53, 262.56 (a)(1) through (4), (6), and (b), and 262.57, export such materials only upon consent of the receiving country and in conformance with the EPA Acknowledgment of Consent to the shipment to the transporter transporting the shipment for export;

(B) Transporters transporting a shipment for export may not accept a shipment if he/she knows the shipment does not conform to the EPA Acknowledgment of Consent, must ensure that a copy of the EPA Acknowledgment of Consent accompanies the shipment and must ensure that it is delivered to the facility designated by the persons initiating the shipment.

(ii) Scrap metal that is not excluded under § 261.4(a)(14); (iii) Fuels produced from the refining of oil-bearing hazardous wastes along with normal process streams at a petroleum refining facility if such wastes result from normal petroleum refining, production, and transportation practices (this exemption does not apply to fuels produced from oil recovered from oil-bearing hazardous waste, where such recovered oil is already excluded under § 261.4(a)(13);

(iv) (A) Hazardous waste fuel produced from oil-bearing hazardous waste from petroleum refining, production, or transportation practices, or produced from oil reclaimed from such hazardous wastes, where such hazardous wastes are reintroduced into a process that does not use distillation or does not produce products from crude oil so long as the resulting fuel meets the used oil specification under § 279.11 of these regulations and so long as no other hazardous wastes are used to produce the hazardous waste fuel; 34 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (B) Hazardous waste fuel produced from oil-bearing hazardous waste from petroleum refining production, and transportation practices, where such hazardous wastes are reintroduced into a refining process after a point at which contaminants are removed, so long as the fuel meets the used oil fuel specification under § 279.11 of these regulations; and (C) Oil reclaimed from oil-bearing hazardous wastes from petroleum refining, production, and transportation practices, which reclaimed oil is burned as a fuel without reintroduction to a refining process, so long as the reclaimed oil meets the used oil fuel specification under § 279.11 of these regulations.

(4) Used oil that is recycled and is also a hazardous waste solely because it exhibits a hazardous characteristic is not subject to the requirements of Parts 260 through 268 of these regulations, but is regulated under Part 279 of these regulations. Used oil that is recycled includes any used oil which is reused, following its original use, for any purpose (including the purpose for which the oil was originally used). Such term includes, but is not limited to, oil which is re-refined, reclaimed, burned for energy recovery, or reprocessed.

(5) Hazardous waste that is exported or imported for purpose of recovery is subject to the requirements of Part 262, Subpart H.

(b) Generators and transporters of recyclable materials are subject to the applicable requirements of Parts 262 and 263 of these regulations and the notification requirements of Part 99, except as provided in paragraph (a) of this section.

(c) (1) Owners or operators of facilities that store recyclable materials before they are recycled are regulated under all applicable provisions of Subparts A through L, and AA through DD of Parts 264 and 265, Parts 266 through 268 and Part 100 of these regulations and the notification requirements of Part 99 of these regulations, except as provided in paragraph (a) of this section. (The recycling process itself is exempt from regulation except as provided in § 261.6(d).) (2) Owners or operators of facilities that recycle recyclable materials without storing them before they are recycled are subject to the following requirements, except as provided in paragraph (a) of this section:

(i) Notification requirements of Part 99 of these regulations; (ii) Sections 265.71 and 265.72 (dealing with the use of the manifest and manifest discrepancies) of these regulations.

(iii) Section 261.6(d) of these regulations.

(iv) Section 265.75 of these regulations (biennial reporting requirements). (d) Owners or operators of facilities subject to RCRA permitting requirements with hazardous waste management units that recycle hazardous wastes are subject to the requirements of subparts AA and BB of Part 264 or 265 of these regulations.

35 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.7 Residues of hazardous waste in empty containers. (a) (1) Any hazardous waste remaining in either (i) an empty container or (ii) an inner liner removed from an empty container, as defined in paragraph (b) of this section, is not subject to regulation under Parts 261 through 266, Part 268 or Part 100 or to the notification requirements of Part 99 of these regulations.

(2) Any hazardous waste in either (i) a container that is not empty or (ii) an inner liner removed from a container that is not empty, as defined in paragraph (b) of this section is subject to regulation under Parts 261 through 266, Part 268, and Part 100 of these regulations and the notification requirements of Part 99 of these regulations. (b) (1) A container or an inner liner removed from a container that has held any hazardous waste, except a waste that is a compressed gas or that is identified as an acute hazardous waste listed in § § 261.31, 261.32, or 261.33(e) of these regulations is empty if: (i) All wastes have been removed that can be removed using the practices commonly employed to remove materials from that type of container, e.g., pouring, pumping, and aspirating, and (ii) No more than 2.5 centimeters (one inch) of residue remain on the bottom of the container or inner liner or, (iii) (A) No more than 3 percent by weight of the total capacity of the container remains in the container or inner liner if the container is less than or equal to 119 gallons in size, or (B) No more than 0.3 percent by weight of the total capacity of the container remains in the container or inner liner if the container is greater than 119 gallons in size.

(2) A container that has held a hazardous waste that is a compressed gas is empty when the pressure in the container approaches atmospheric.

(3) A container or an inner liner removed from a container that has held an acute hazardous waste listed in § § 261.31, 261.32, or 261.33(e) is empty if: (i) The container or inner liner has been triple rinsed using a solvent capable of removing the commercial chemical product or manufacturing chemical intermediate;

(ii) The container or inner liner has been cleaned by another method that has been shown in the scientific literature, or by tests conducted by the generator, to achieve equivalent removal; or (iii) In the case of a container, the inner liner that prevented contact of the commercial chemical product or manufacturing chemical intermediate with the container, has been removed.

(c) Containers of hazardous waste pharmaceuticals are subject to § 267.507 for determining when they are considered empty, in lieu of this section, except as provided by § 267.507(c) and (d). 36 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.8 PCB Wastes Regulated Under Toxic Substance Control Act. The disposal of PCB-containing dielectric fluid and electric equipment containing such fluid authorized for use and regulated under CFR Part 761 and that are hazardous only because they fail the test for the Toxicity Characteristic (Hazardous Waste Codes D018 through DO43 only) are exempt from regulation under Parts 261 through 265, and Parts 268 and 100 of these regulations and CFR Part 124, and the notification requirements of section 3010 of RCRA.

§ 261.9 Requirements for Universal Waste.

(a) The wastes listed in this section are exempt from regulation under Parts 262 through 268, and Part 100 of these regulations except as specified in Part 273 of these regulations. If a waste handler chooses to manage its universal waste under the Part 273 regulations, but fails to meet those requirements, the waste handler remains subject to, and must comply with, all applicable requirements of the Colorado Hazardous Waste Regulations (6 CCR 1007-3), Parts 260 through 268, 99 and 100. The wastes listed in this section are subject to regulation under Part 273: (1) Batteries as described in § 273.2(a) of these regulations; (2) Pesticides as described in § 273.2(b) of these regulations; (3) Mercury-containing devices as described in § 273.2(c) of these regulations; (4) Aerosol cans as described in § 273.2(d) of these regulations; (5) Lamps as described in § 273.2(e) of these regulations; and (6) Electronic devices and electronic components as described in § 273.2(f) of these regulations.

Subpart B - Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Waste § 261.10 Criteria for identifying the characteristics of hazardous waste. (a) The Department shall identify and define a characteristic of hazardous waste in Subpart C only upon determining that:

(1) A solid waste that exhibits the characteristic may: (i) Cause, or significantly contribute to, an increase in mortality or an increase in serious irreversible, or incapacitating reversible, illness; or (ii) Pose a substantial present or potential hazard to human health or the environment when it is improperly treated, stored, transported, disposed of or otherwise managed; and (2) The characteristic can be:

(i) Measured by an available standardized test method which is reasonably within the capability of generators of solid waste or private sector laboratories that are available to serve generators of solid waste; or (ii) Reasonably detected by generators of solid waste through their knowledge of their waste.

37 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.11 Criteria for listing hazardous waste.

(a) The Department shall list a solid waste as a hazardous waste only upon determining that the solid waste meets one of the following criteria:

(1) It exhibits any of the characteristics of hazardous waste identified in Subpart C. (2) It has been found to be fatal to humans in low doses or, in the absence of data on human toxicity, it has been shown in studies to have an oral LD 50 toxicity (rat) of less than 50 milligrams per kilogram, an inhalation LC 50 toxicity (rat) of less than 2 milligrams per liter, or a dermal LD 50 toxicity (rabbit) of less than 200 milligrams per kilogram or is otherwise capable of causing or significantly contributing to an increase in serious irreversible, or incapacitating reversible, illness. (Waste listed in accordance with these criteria will be designated Acute Hazardous Waste.)

(3) It contains any of the toxic constituents listed in Appendix VIII and after considering the following factors, the Director concludes that the waste is capable of posing a substantial present or potential hazard to human health or the environment when improperly treated, stored, transported or disposed of, or otherwise managed: (i) The nature of the toxicity presented by the constituent. (ii) The concentration of the constituent in the waste. (iii) The potential of the constituent or any toxic degradation product of the constituent to migrate from the waste into the environment under the types of improper management considered in paragraph (a)(3)(vii) of this section. (iv) The persistence of the constituent or any toxic degradation product of the constituent.

(v) The potential for the constituent or any toxic degradation product of the constituent to degrade into nonharmful constituents and the rate of degradation. (vi) The degree to which the constituent or any degradation product of the constituent bioaccumulates in ecosystems.

(vii) The plausible types of improper management to which the waste could be subjected.

(viii) The quantities of the waste generated at individual generation sites or on a regional or national basis.

(ix) The nature and severity of the human health and environmental damage that has occurred as a result of the improper management of wastes containing the constituent.

(x) Action taken by other governmental agencies or regulatory programs based on the health or environmental hazard posed by the waste or waste constituent. (xi) Such other factors as may be appropriate.

Substances will be listed on Appendix VIII only if they have been shown in scientific studies to have toxic, carcinogenic, mutagenic or teratogenic effects on humans or other life forms. 38 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (Wastes listed in accordance with these criteria will be designated Toxic wastes.) (b) The Director may list classes or types of solid waste as hazardous waste if he/she has reason to believe that individual wastes, within the class or type of waste, typically or frequently are hazardous under the definition of hazardous waste found in Section 1004(5) of the Act. (c) Reserved Subpart C - Characteristics of Hazardous Waste § 261.20 General.

(a) A solid waste, as defined in § 261.2, which is not excluded from regulation as a hazardous waste under § 261.4(b), is a hazardous waste if it exhibits any of the characteristics identified in this Subpart.

(b) A hazardous waste which is identified by a characteristic in this Subpart is assigned every EPA Hazardous Waste Number that is applicable as set forth in this Subpart. This number must be used in complying with the notification requirements of Part 99 of these regulations and all applicable recordkeeping and reporting requirements under Parts 262 through 266, Part 268, and Part 100.

(c) For purposes of this Subpart, the Department will consider a sample obtained using any of the applicable sampling methods specified in Appendix I to be a representative sample within the meaning of Part 260.

§ 261.21 Characteristic of ignitability.

(a) A solid waste exhibits the characteristic of ignitability if a representative sample of the waste has any of the following properties:

(1) It is a liquid, other than a solution containing less than 24 percent alcohol by volume and at least 50 percent water by weight, that has a flash point less than 60º C (140º F), as determined by using one of the following ASTM standards: ASTM D93-79, ASTM D93- 80, D3278-78, D8174-18, or D8175-18 as specified in SW-846 Test Methods 1010(B) or 1020(C) (all incorporated by reference, see § 260.11).

(2) It is not a liquid and is capable, under standard temperature and pressure, of causing fire through friction, absorption of moisture, or spontaneous chemical changes and, when ignited, burns so vigorously and persistently that it creates a hazard. (3) It is an ignitable compressed gas.

(i) The term “compressed gas” shall designate any material or mixture having in the container an absolute pressure exceeding 40 p.s.i. at 70ºF or, regardless of the pressure at 70ºF, having an absolute pressure exceeding 104 p.s.i. at 130ºF; or any liquid flammable material having a vapor pressure exceeding 40 p.s.i. absolute at 100ºF as determined by ASTM Test D-323.

(ii) A compressed gas shall be characterized as ignitable if any one of the following occurs:

39 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (A) Either a mixture of 13 percent or less (by volume) with air forms a flammable mixture or the flammable range with air is wider than 12 percent regardless of the lower limit. These limits shall be determined at atmospheric temperature and pressure. The method of sampling and test procedure shall be the ASTM E681-85 (incorporated by reference, see § 260.11), or other equivalent methods approved by the Associate Administrator, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation.

(B) It is determined to be flammable or extremely flammable using 49 CFR § 173.115(l).

(4) It is an oxidizer. An oxidizer for the purpose of this subchapter is a substance such as a chlorate, permanganate, inorganic peroxide, or a nitrate, that yields oxygen readily to stimulate the combustion of organic matter.

(i) An organic compound containing the bivalent -O-O- structure and which may be considered a derivative of hydrogen peroxide where one or more of the hydrogen atoms have been replaced by organic radicals must be classed as an organic peroxide unless:

(A) The material meets the definition of a Division 1.1, 1.2, or 1.3 explosive, as defined in § 261.23(a)(8), in which case it must be classed as an explosive, (B) The material is forbidden to be offered for transportation according to 49 CFR 172.101 and 49 CFR 173.21, (C) It is determined that the predominant hazard of the material containing an organic peroxide is other than that of an organic peroxide, or (D) According to data on file with the Pipeline and Hazardous Materials Safety Administration in the U.S. Department of Transportation, it has been determined that the material does not present a hazard in transportation.

(b) A solid waste that exhibits the characteristic of ignitability has the EPA Hazardous Waste Number of D001.

§ 261.22 Characteristic of corrosivity.

(a) A solid waste exhibits the characteristic of corrosivity if a representative sample of the waste has either of the following properties:

(1) It is aqueous and has a pH less than or equal to 2 or greater than or equal to 12.5, as determined by a pH meter using Method 9040C in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, “EPA Publication SW-846, as incorporated by reference in § 260.11 of these regulations.

(2) It is a liquid and corrodes steel (SAE 1020) at a rate greater than 6.35 mm (0.250 inch) per year at a test temperature of 55°C (130°F) as determined by Method 1110A in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, “EPA Publication SW- 846, as incorporated by reference in § 260.11 of these regulations. 40 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (b) A solid waste that exhibits the characteristic of corrosivity has the EPA Hazardous Waste Number of D002.

§ 261.23 Characteristic of reactivity.

(a) A solid waste exhibits the characteristic of reactivity if a representative sample of the waste has any of the following properties:

(1) It is normally unstable and readily undergoes violent change without detonating. (2) It reacts violently with water.

(3) It forms potentially explosive mixtures with water. (4) When mixed with water, it generates toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment. (5) It is a cyanide or sulfide bearing waste which, when exposed to pH conditions between 2 and 12.5 can generate toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment.

(6) It is capable of detonation or explosive reaction if it is subjected to a strong initiating source or if heated under confinement.

(7) It is readily capable of detonation or explosive decomposition or reaction at standard temperature and pressure.

(8) It is a forbidden explosive as defined in 49 CFR § 173.54, or is a Division 1.1, 1.2, or 1.3 explosive as defined in 49 CFR § 173.50 and § 173.53.

(b) A solid waste that exhibits the characteristic of reactivity, has the EPA Hazardous Waste Number of D003.

§ 261.24 Toxicity Characteristic.

(a) A solid waste (except manufactured gas plant waste) exhibits the characteristic of toxicity if, using the Toxicity Characteristic Leaching Procedure, Test Method 1311 in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW-846, as incorporated by reference in § 260.11 of these regulations, the extract from a representative sample of the waste contains any of the contaminants listed in Table 1 at a concentration equal to or greater than the respective value given in that Table. Where the waste contains less than 0.5 percent filterable solids, the waste itself, after filtering using the methodology outlined in Method 1311, is considered to be the extract for the purpose of this section. (b) A solid waste that exhibits the characteristic of toxicity has the EPA Hazardous Waste Number specified in Table 1 which corresponds to the toxic contaminant causing it to be hazardous. 41 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Table 1. - Maximum Concentration of Contaminants for the Toxicity Characteristic Contaminant Regulatory Level (mg/L)

EPA – HW No.1 CAS No.2 D004 Arsenic 7440-38-2 5.0 D005 Barium 7440-39-3 100.0 D018 Benzene 71-43-2 0.5 D006 Cadmium 7440-43-9 1.0 D019 Carbon tetrachloride 56-23-5 0.5 D020 Chlordane 57-74-9 0.03 D021 Chlorobenzene 108-90-7 100.0 D022 Chloroform 67-66-3 6.0 D007 Chromium 7440-47-3 5.0 D023 o-Cresol 95-48-7 4200.0 D024 m-Cresol 108-39-4 4200.0 D025 p-Cresol 106-44-5 4200.0 D026 Cresol - 4200.0 D016 2,4-D 94-75-7 10.0 D027. 1,4-Dichlorobenzene 106-46-7 7.5 D028 1,2-Dichloroethane 107-06-2 0.5 D029 1,1-Dichloroethylene 75-35-4 0.7 D030 2,4-Dinitrotoluene 121-14-2 30.13 D012 Endrin 72-20-8 0.02 D031 Heptachlor (and its epoxide) 76-44-8 0.008 D032 Hexachlorobenzene 118-74-1 30.13 D033 Hexachlorobutadiene 87-68-3 0.5 D034 Hexachloroethane 67-72-1 3.0 D008 Lead 7439-92-1 5.0 D013 Lindane 58-89-9 0.4 D009 Mercury 7439-97-6 0.2 D014 Methoxychlor 72-43-5 10.0 D035 Methyl ethyl ketone 78-93-3 200.0 D036 Nitrobenzene 98-95-3 2.0 D037 Pentachlorophenol 87-86-5 100.0 D038 Pyridine 110-86-1 35.0 D010 Selenium 7782-49-2 1.0 D011 Silver 7440-22-4 5.0 D039 Tetrachloroethylene 127-18-4 0.7 D015 Toxaphene 8001-35-2 0.5 D040 Trichloroethylene 79-01-6 0.5 D041 2,4,5-Trichlorophenol 95-95-4 400.0 D042 2,4,6-Trichlorophenol 88-06-2 2.0 D017 2,4.5-TP (Silvex) 93-72-1 1.0 D043 Vinyl chloride 75-01-4 0.2 1 Hazardous waste number.

2 Chemical abstracts service number.

3 Quantitation limit is greater than the calculated regulatory level. The quantitation limit therefore becomes the regulatory level. 4 If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. 42 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Subpart D - Lists of Hazardous Wastes § 261.30 General.

(a) A solid waste is a hazardous waste if it is listed in this Subpart, unless it has been excluded from this list under § § 260.20 and 260.22.

(b) The Department will indicate its basis for listing the classes or types of wastes listed in this Subpart by employing one or more of the following Hazard Codes: Ignitable Waste (I)

Corrosive Waste (C)

Reactive Waste (R)

Toxicity Characteristic Waste (E)

Acute Hazardous Waste (H)

Toxic Waste (T)

Appendix VII identifies the constituent which caused the Department to list the waste as a Toxicity Characteristic Waste (E) or Toxic Waste (T) in § § 261.31 and 261.32. (c) Each hazardous waste listed in this Subpart is assigned an EPA Hazardous Waste Number which precedes the name of the waste. This number must be used in complying with the notification requirements of CRS 1973, 25-15-301(2)(a) and (b) and certain recordkeeping and reporting requirements under Parts 262 through 266, Part 268, and Part 100. (d) The following hazardous wastes listed in § 261.31 are subject to the generator category limits for acutely hazardous wastes established in table 1 of § 262.13 of these regulations: EPA Hazardous Wastes Nos. F020, F021, F022, F023, F026 and F027.

43 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.31 Hazardous wastes from non-specific sources.

(a) The following solid wastes are listed hazardous wastes from non-specific sources unless they are excluded under § § 260.20 and 260.22 and listed in Appendix IX. Industry Hazardous waste Hazard and EPA code hazardous waste No.

Generic:

F001 The following spent halogenated solvents used in degreasing: (T) Tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1- trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. F002 The following spent halogenated solvents: Tetrachloroethylene, methylene (T) chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2- trichloro-1,2,2-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane, and 1,1,2-trichloroethane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those listed in F001, F004, or F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.

F003 The following spent non-halogenated solvents: Xylene, acetone, ethyl (I)* acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents; and all spent solvent mixtures/blends containing, before use, one or more of the above non-halogenated solvents, and, a total of ten percent or more (by volume) of one or more of those solvents listed in F001, F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.

F004 The following spent non-halogenated solvents: Cresols and cresylic acid, and (T) nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non- halogenated solvents or those solvents listed in F001, F002, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.

F005 The following spent non-halogenated solvents: Toluene, methyl ethyl ketone, (I,T) carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2- nitropropane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non- halogenated solvents or those solvents listed in F001, F002, or F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.

F006 Wastewater treatment sludges from electroplating operations except from the (T) following processes: (1) Sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum.

44 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry Hazardous waste Hazard and EPA code hazardous waste No.

Generic:

F007 Spent cyanide plating bath solutions from electroplating operations. (R, T) F008 Plating bath residues from the bottom of plating baths from electroplating (R, T) operations where cyanides are used in the process.

F009 Spent stripping and cleaning bath solutions from electroplating operations (R, T) where cyanides are used in the process.

F010 Quenching bath residues from oil baths from metal heat treating operations (R, T) where cyanides are used in the process.

F011 Spent cyanide solutions from salt bath pot cleaning from metal heat treating (R, T) operations.

F012 Quenching waste water treatment sludges from metal heat treating (T) operations where cyanides are used in the process.

F019 Wastewater treatment sludges from the chemical conversion coating of (T) aluminum except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process. Note: For the purposes of the F019 listing, conversion coating is intended to include but not be limited to coloring, phosphating, chromating and immersion plating when those processes are used to impart a conversion coating on aluminum.

F020 Wastes (except wastewater and spent carbon from hydrogen chloride (H) purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. (This listing does not include wastes from the production of Hexachlorophene from highly purified 2,4,5-trichlorophenol.). F021 Wastes (except wastewater and spent carbon from hydrogen chloride (H) purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of pentachlorophenol, or of intermediates used to produce its derivatives. F022 Wastes (except wastewater and spent carbon from hydrogen chloride (H) purification) from the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzenes under alkaline conditions.

F023 Wastes (except wastewater and spent carbon from hydrogen chloride (H) purification) from the production of materials on equipment previously used for the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- and tetrachlorophenols. (This listing does not include wastes from equipment used only for the production or use of Hexachlorophene from highly purified 2,4,5-trichlorophenol.).

F024 Process wastes, including but not limited to, distillation residues, heavy ends, (T) tars, and reactor clean-out wastes, from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. (This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in § 261.31 or § 261.32.).

45 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry Hazardous waste Hazard and EPA code hazardous waste No.

Generic:

F025 Condensed light ends, spent filters and filter aids, and spent desiccant (T) wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. F026 Wastes (except wastewater and spent carbon from hydrogen chloride (H) purification) from the production of materials on equipment previously used for the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzene under alkaline conditions.

F027 Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or (H) discarded unused formulations containing compounds derived from these chlorophenols. (This listing does not include formulations containing Hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component.).

F028 Residues resulting from the incineration or thermal treatment of soil (T) contaminated with EPA Hazardous Waste Nos. F020, F021, F022, F023, F026, and F027.

F032 Wastewaters (except those that have not come into contact with process (T) contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations (except potentially cross-contaminated wastes that have had the F032 waste code deleted in accordance with ' 261.35 of these regulations or potentially cross- contaminated wastes that are otherwise currently regulated as hazardous wastes (i.e., F034 or F035), and where the generator does not resume or initiate use of chlorophenolic formulations). This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol.. F034 Wastewaters (except those that have not come into contact with process (T) contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol.

F035 Wastewaters (except those that have not come into contact with process (T) contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. 46 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry Hazardous waste Hazard and EPA code hazardous waste No.

Generic:

F037 Petroleum refinery primary oil/water/solids separation sludge-Any sludge (T) generated from the gravitational separation of oil/water/solids during the storage or treatment of process wastewaters and oily cooling wastewaters from petroleum refineries. Such sludges include, but are not limited to, those generated in oil/water/solids separators; tanks and impoundments; ditches and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludge generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in § 261.31(b)(2) (including sludges generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and K051 wastes are not included in this listing. This listing does include residuals generated from processing or recycling oil-bearing hazardous secondary materials excluded under § 261.4(a)(13)(i), if those residuals are to be disposed of.

F038 Petroleum refinery secondary (emulsified) oil/water/solids separation sludge- (T) Any sludge and/or float generated from the physical and/or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. Such wastes include, but are not limited to, all sludges and floats generated in: induced air flotation (IAF) units, tanks and impoundments, and all sludges generated in DAF units. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges and floats generated in aggressive biological treatment units as defined in § 261.31(b)(2) (including sludges and floats generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and F037, K048, and K051 wastes are not included in this listing.

F039 Leachate (liquids that have percolated through land disposed wastes) (T) resulting from the disposal of more than one restricted waste classified as hazardous under subpart D of this part. (Leachate resulting from the disposal of one or more of the following EPA Hazardous Wastes and no other Hazardous Wastes retains its EPA Hazardous Waste Number(s): F020, F021, F022, F026, F027, and/or F028.).

FOOTNOTE: *(I,T) should be used to specify mixtures containing ignitable and toxic constituents. 47 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (b) Listing Specific Definitions:

(1) For the purposes of the F037 and F038 listings, oil/water/solids is defined as oil and/or water and/or solids.

(2) (i) For the purposes of the F037 and F038 listings, aggressive biological treatment units are defined as units which employ one of the following four treatment methods: activated sludge; trickling filter; rotating biological contactor for the continuous accelerated biological oxidation of wastewaters; or high-rate aeration. High-rate aeration is a system of surface impoundments or tanks, in which intense mechanical aeration is used to completely mix the wastes, enhance biological activity, and (A) the units employ a minimum of 6 hp per million gallons of treatment volume; and either (B) the hydraulic retention time of the unit is no longer than 5 days; or (C) the hydraulic retention time is no longer than 30 days and the unit does not generate a sludge that is a hazardous waste by the Toxicity Characteristic.

(ii) Generators and treatment, storage, and disposal facilities have the burden of proving that their sludges are exempt from listing as F037 and F038 wastes under this definition. Generators and treatment, storage, and disposal facilities must maintain, in their operating or other onsite records, documents and data sufficient to prove that: (A) the unit is an aggressive biological treatment unit as defined in this subsection; and (B) the sludges sought to be exempted from the definitions of F037 and/or F038 were actually generated in the aggressive biological treatment unit.

(3) (i) For the purposes of the F037 listing, sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement.

(ii) For the purpose of the F038 listing, (A) sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement and (B) floats are considered to be generated at the moment they are formed in the top of the unit. 48 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.32 Hazardous Waste from Specific Sources.

(a) The following solid wastes are listed hazardous wastes from specific sources unless they are excluded under § § 260.20 and 260.22 and listed in Appendix IX. Industry and EPA Hazard Hazardous waste hazardous code waste No Wood preservation:

K001 Bottom sediment sludge from the treatment of wastewaters from wood preserving (T) processes that use creosote and/or pentachlorophenol.

Inorganic pigments:

K002 Wastewater treatment sludge from the production of chrome yellow and orange (T) pigments.

K003 Wastewater treatment sludge from the production of molybdate orange pigments. (T) K004 Wastewater treatment sludge from the production of zinc yellow pigments. (T) K005 Wastewater treatment sludge from the production of chrome green pigments. (T) K006 Wastewater treatment sludge from the production of chrome oxide green pigments (T) (anhydrous and hydrated).

K007 Wastewater treatment sludge from the production of iron blue pigments. (T) K008 Oven residue from the production of chrome oxide green pigments. (T) Organic chemicals:

K009 Distillation bottoms from the production of acetaldehyde from ethylene. (T) K010 Distillation side cuts from the production of acetaldehyde from ethylene. (T) K011 Bottom stream from the wastewater stripper in the production of acrylonitrile. (R, T) K013 Bottom stream from the acetonitrile column in the production of acrylonitrile. (R, T) K014 Bottoms from the acetonitrile purification column in the production of acrylonitrile. (T) K015 Still bottoms from the distillation of benzyl chloride. (T) K016 Heavy ends or distillation residues from the production of carbon tetrachloride. (T) K017 Heavy ends (still bottoms) from the purification column in the production of (T) epichlorohydrin.

K018 Heavy ends from the fractionation column in ethyl chloride production. (T) K019 Heavy ends from the distillation of ethylene dichloride in ethylene dichloride (T) production.

K020 Heavy ends from the distillation of vinyl chloride in vinyl chloride monomer (T) production.

K021 Aqueous spent antimony catalyst waste from fluoromethanes production. (T) K022 Distillation bottom tars from the production of phenol/acetone from cumene. (T) K023 Distillation light ends from the production of phthalic anhydride from naphthalene. (T) K024 Distillation bottoms from the production of phthalic anhydride from naphthalene. (T) K025 Distillation bottoms from the production of nitrobenzene by the nitration of benzene. (T) K026 Stripping still tails from the production of methy ethyl pyridines. (T) K027 Centrifuge and distillation residues from toluene diisocyanate production. (R, T) K028 Spent catalyst from the hydrochlorinator reactor in the production of 1,1,1- (T) trichloroethane.

K029 Waste from the product steam stripper in the production of 1,1,1-trichloroethane. (T) 49 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No K030 Column bottoms or heavy ends from the combined production of trichloroethylene (T) and perchloroethylene.

K083 Distillation bottoms from aniline production. (T)

K085 Distillation or fractionation column bottoms from the production of chlorobenzenes. (T) K093 Distillation light ends from the production of phthalic anhydride from ortho-xylene. (T) K094 Distillation bottoms from the production of phthalic anhydride from ortho-xylene. (T) K095 Distillation bottoms from the production of 1,1,1-trichloroethane. (T) K096 Heavy ends from the heavy ends column from the production of 1,1,1- (T) trichloroethane.

K103 Process residues from aniline extraction from the production of aniline. (T) K104 Combined wastewater streams generated from nitrobenzene/aniline production. (T) K105 Separated aqueous stream from the reactor product washing step in the production (T) of chlorobenzenes.

K107 Column bottoms from product separation from the production of 1,1- (C,T) dimethylhydrazine (UDMH) from carboxylic acid hydrazides. K108 Condensed column overheads from product separation and condensed reactor (I,T) vent gases from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.

K109 Spent filter cartridges from product purification from the production of 1,1- (T) dimethylhydrazine (UDMH) from carboxylic acid hydrazides. K110 Condensed column overheads from intermediate separation from the production of (T) 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides. K111 Product washwaters from the production of dinitrotoluene via nitration of toluene. (C,T) K112 Reaction by-product water from the drying column in the production of (T) toluenediamine via hydrogenation of dinitrotoluene.

K113 Condensed liquid light ends from the purification of toluenediamine in the (T) production of toluenediamine via hydrogenation of dinitrotoluene. K114 Vicinals from the purification of toluenediamine in the production of toluenediamine (T) via hydrogenation of dinitrotoluene.

K115 Heavy ends from the purification of toluenediamine in the production of (T) toluenediamine via hydrogenation of dinitrotoluene.

K116 Organic condensate from the solvent recovery column in the production of toluene (T) diisocyanate via phosgenation of toluenediamine.

K117 Wastewater from the reactor vent gas scrubber in the production of ethylene (T) dibromide via bromination of ethene.

K118 Spent adsorbent solids from purification of ethylene dibromide in the production of (T) ethylene dibromide via bromination of ethene.

K136 Still bottoms from the purification of ethylene dibromide in the production of (T) ethylene dibromide via bromination of ethene.

K149 Distillation bottoms from the production of alpha- (or methyl-) chlorinated toluenes, (T) ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups, (This waste does not include still bottoms from the distillation of benzyl chloride.).

K150 Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas (T) and hydrochloric acid recovery processes associated with the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.

50 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No K151 Wastewater treatment sludges, excluding neutralization and biological sludges, (T) generated during the treatment of wastewaters from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.

K156 Organic waste (including heavy ends, still bottoms, light ends, spent solvents, (T) filtrates, and decantates) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.).

K157 Wastewaters (including scrubber waters, condenser waters, washwaters, and (T) separation waters) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.).

K158 Bag house dusts and filter/separation solids from the production of carbamates and (T) carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.).

K159 Organics from the treatment of thiocarbamate wastes (T) K161 Purification solids (including filtration, evaporation, and centrifugation solids), bag (R,T) house dust and floor sweepings from the production of dithiocarbamate acids and their salts. (This listing does not include K125 or K126). K174 Wastewater treatment sludges from the production of ethylene dichloride or vinyl (T) chloride monomer (including sludges that result from commingled ethylene dichloride or vinyl chloride monomer wastewater and other wastewater), unless the sludges meet the following conditions: (i) they are disposed of in a subtitle C or non- hazardous landfill licensed or permitted by the state or federal government; (ii) they are not otherwise placed on the land prior to final disposal; and (iii) the generator maintains documentation demonstrating that the waste was either disposed of in an on-site landfill or consigned to a transporter or disposal facility that provided a written commitment to dispose of the waste in an off-site landfill. Respondents in any action brought to enforce the requirements of subtitle C must, upon a showing by the government that the respondent managed wastewater treatment sludges from the production of vinyl chloride monomer or ethylene dichloride, demonstrate that they meet the terms of the exclusion set forth above. In doing so, they must provide appropriate documentation (e.g., contracts between the generator and the landfill owner/operator, invoices documenting delivery of waste to landfill, etc.) that the terms of the exclusion were met. K175 Wastewater treatment sludges from the production of vinyl chloride monomer using (T) mercuric chloride catalyst in an acetylene-based process. 51 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No K181 Nonwastewaters from the production of dyes and/or pigments (including (T) nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in paragraph (c) of this section that are equal to or greater than the corresponding paragraph (c) levels, as determined on a calendar year basis. These wastes will not be hazardous if the nonwastewaters are: (i) disposed in a Subtitle D landfill unit subject to the design criteria in § 258.40, (ii) disposed in a Subtitle C landfill unit subject to either § 264.301 or § 265.301, (iii) disposed in other Subtitle D landfill units that meet the design criteria in § 258.40, § 264.301, or § 265.301, or (iv) treated in a combustion unit that is permitted under Subtitle C, or an onsite combustion unit that is permitted under the Clean Air Act. For the purposes of this listing, dyes and/or pigments production is defined in paragraph (b)(1) of this section. Paragraph (d) of this section describes the process for demonstrating that a facility's nonwastewaters are not K181. This listing does not apply to wastes that are otherwise identified as hazardous under §§ 261.21- 261.24 and 261.31-261.33 at the point of generation. Also, the listing does not apply to wastes generated before any annual mass loading limit is met. Inorganic chemicals:

K071 Brine purification muds from the mercury cell process in chlorine production, where (T) separately prepurified brine is not used.

K073 Chlorinated hydrocarbon waste from the purification step of the diaphragm cell (T) process using graphite anodes in chlorine production.

K106 Wastewater treatment sludge from the mercury cell process in chlorine production. (T) K176 Baghouse filters from the production of antimony oxide, including filters from the (E) production of intermediates (e.g., antimony metal or crude antimony oxide). K177 Slag from the production of antimony oxide that is speculatively accumulated or (T) disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide).

K178 Residues from manufacturing and manufacturing-site storage of ferric chloride from (T) acids formed during the production of titanium dioxide using the chloride-ilmenite process.

Pesticides:

K031 By-product salts generated in the production of MSMA and cacodylic acid. (T) K032 Wastewater treatment sludge from the production of chlordane. (T) K033 Wastewater and scrub water from the chlorination of cyclopentadiene in the (T) production of chlordane.

K034 Filter solids from the filtration of hexachlorocyclopentadiene in the production of (T) chlordane.

K035 Wastewater treatment sludges generated in the production of creosote. (T) K036 Still bottoms from toluene reclamation distillation in the production of disulfoton. (T) K037 Wastewater treatment sludges from the production of disulfoton. (T) K038 Wastewater from the washing and stripping of phorate production. (T) K039 Filter cake from the filtration of diethylphosphorodithioic acid in the production of (T) phorate.

K040 Wastewater treatment sludge from the production of phorate. (T) K041 Wastewater treatment sludge from the production of toxaphene. (T) K042 Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the (T) production of 2,4,5-T.

52 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No K043 2,6-Dichlorophenol waste from the production of 2,4-D. (T) K097 Vacuum stripper discharge from the chlordane chlorinator in the production of (T) chlordane.

K098 Untreated process wastewater from the production of toxaphene. (T) K099 Untreated wastewater from the production of 2,4-D. (T) K123 Process wastewater (including supernates, filtrates, and washwaters) from the (T) production of ethylenebisdithiocarbamic acid and its salt. K124 Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid (C, T) and its salts.

K125 Filtration, evaporation, and centrifugation solids from the production of (T) ethylenebisdithiocarbamic acid and its salts.

K126 Baghouse dust and floor sweepings in milling and packaging operations from the (T) production or formulation of ethylenebisdithiocarbamic acid and its salts. K131 Wastewater from the reactor and spent sulfuric acid from the acid dryer from the (C,T) production of methyl bromide.

K132 Spent absorbent and wastewater separator solids from the production of methyl (T) bromide.

Explosives:

K044 Wastewater treatment sludges from the manufacturing and processing of (R) explosives.

K045 Spent carbon from the treatment of wastewater containing explosives. (R) K046 Wastewater treatment sludges from the manufacturing, formulation and loading of (T) lead-based initiating compounds.

K047 Pink/red water from TNT operations. (R)

Petroleum refining:

K048 Dissolved air flotation (DAF) float from the petroleum refining industry. (T) K049 Slop oil emulsion solids from the petroleum refining industry. (T) K050 Heat exchanger bundle cleaning sludge from the petroleum refining industry. (T) K051 API separator sludge from the petroleum refining industry. (T) K052 Tank bottoms (leaded) from the petroleum refining industry. (T) K169 Crude oil storage tank sediment from petroleum refining operations (T) K170 Clarified slurry oil tank sediment and/or in-line filter/separation solids from (T) petroleum refining operations.

K171 Spent Hydrotreating catalyst from petroleum refining operations, including guard (I,T) beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media).

K172 Spent Hydrorefining catalyst from petroleum refining operations, including guard (I,T) beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media).

Iron and steel:

K061 Emission control dust/sludge from the primary production of steel in electric (T) furnaces.

K062 Spent pickle liquor generated by steel finishing operations of facilities within the (C,T) iron and steel industry (SIC Codes 331 and 332).

Primary aluminum:

K088 Spent potliners from primary aluminum reduction. (T) 53 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No Secondary lead:

K069 Emission control dust/sludge from secondary lead smelting. (Note: This listing is (T) stayed administratively for sludge generated from secondary acid scrubber systems. The stay will remain in effect until further administrative action is taken. If EPA takes further action affecting this stay, the Hazardous Waste Commission will publish a notice of the action in the Colorado Register). K100 Waste leaching solution from acid leaching of emission control dust/sludge from (T) secondary lead smelting.

Veterinary pharmaceuticals:

K084 Wastewater treatment sludges generated during the production of veterinary (T) pharmaceuticals from arsenic or organo-arsenic compounds. K101 Distillation tar residues from the distillation of aniline-based compounds in the (T) production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.

K102 Residue from the use of activated carbon for decolorization in the production of (T) veterinary pharmaceuticals from arsenic or organo-arsenic compounds. Ink formulation:

K086 Solvent washes and sludges, caustic washes and sludges, or water washes and (T) sludges from cleaning tubs and equipment used in the formulation of ink from pigments, driers, soaps, and stabilizers containing chromium and lead. Coking:

K060 Ammonia still lime sludge from coking operations. (T) K087 Decanter tank tar sludge from coking operations. (T) K141 Process residues from the recovery of coal tar, including, but not limited to, (T) collecting sump residues from the production of coke from coal or the recovery of coke by-products produced from coal. This listing does not include K087 (decanter tank tar sludges from coking operations).

K142 Tar storage tank residues from the production of coke from coal or from the (T) recovery of coke by-products produced from coal.

K143 Process residues from the recovery of light oil, including, but not limited to, those (T) generated in stills, decanters, and wash oil recovery units from the recovery of coke by-products produced from coal.

K144 Wastewater sump residues from light oil refining, including, but not limited to, (T) intercepting or contamination sump sludges from the recovery of coke by-products produced from coal.

K145 Residues from naphthalene collection and recovery operations from the recovery (T) of coke by-products produced from coal.

K147 Tar storage tank residues from coal tar refining. (T) K148 Residues from coal tar distillation, including but not limited to, still bottoms. (T) Military Munitions:

K901 Waste chemical weapons using or containing any chemical compound identified in (R), Appendix VII of Part 261 as the basis for this listing. Residues resulting from (H), (T), treatment of hazardous wastes with the codes P909, P910 and P911 are included (C), (E) in this listing.

K902 Any soil, water, debris, or containers contaminated through contact with waste (R), chemical weapons listed as K901 or hazardous wastes listed as P909, P910 or (H), (T), P911. (C), (E)

54 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Industry and EPA Hazard Hazardous waste hazardous code waste No K903 Hydrolysate: waste generated from the chemical neutralization of mustard agent by (T), (E) the addition of water and subsequent manipulation to a sustained and stable pH>10 to ensure destruction of sulfonium ions and TDG-mustard aggregates. (b) Listing Specific Definitions: (1) For the purposes of the K181 listing, dyes and/or pigments production is defined to include manufacture of the following product classes: dyes, pigments, or FDA certified colors that are classified as azo, triarylmethane, perylene or anthraquinone classes. Azo products include azo, monoazo, diazo, triazo, polyazo, azoic, benzidine, and pyrazolone products. Triarylmethane products include both triarylmethane and triphenylmethane products. Wastes that are not generated at a dyes and/or pigments manufacturing site, such as wastes from the offsite use, formulation, and packaging of dyes and/or pigments, are not included in the K181 listing.

(c) K181 Listing Levels. Nonwastewaters containing constituents in amounts equal to or exceeding the following levels during any calendar year are subject to the K181 listing, unless the conditions in the K181 listing are met.

Constituent Chemical Abstracts No. Mass levels (kg/yr)

Aniline 62-53-3 9,300 o-Anisidine 90-04-0 110 4-Chloroaniline 106-47-8 4,800 p-Cresidine 120-71-8 660 2,4-Dimethylaniline 95-68-1 100 1,2-Phenylenediamine 95-54-5 710 1,3-Phenylenediamine 108-45-2 1,200 (d) Procedures for demonstrating that dyes and/or pigment nonwastewaters are not K181. The procedures described in paragraphs (d)(1)-(d)(3) and (d)(5) of this section establish when nonwastewaters from the production of dyes/pigments would not be hazardous (these procedures apply to wastes that are not disposed in landfill units or treated in combustion units as specified in paragraph (a) of this section). If the nonwastewaters are disposed in landfill units or treated in combustion units as described in paragraph (a) of this section, then the nonwastewaters are not hazardous. In order to demonstrate that it is meeting the landfill disposal or combustion conditions contained in the K181 listing description, the generator must maintain documentation as described in paragraph (d)(4) of this section.

(1) Determination based on no K181 constituents. Generators that have knowledge (e.g., knowledge of constituents in wastes based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed) that their wastes contain none of the K181 constituents (see paragraph (c) of this section) can use their knowledge to determine that their waste is not K181. The generator must document the basis for all such determinations on an annual basis and keep each annual documentation for three years. (2) Determination for generated quantities of 1,000 MT/yr or less for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is 1,000 metric tons or less, the generator can use knowledge of the wastes (e.g., knowledge of constituents in wastes based on prior analytical data and/or information about raw materials used, production processes used, and reaction and degradation products formed) to conclude that annual mass loadings for the K181 constituents are below the listing levels of paragraph (c) of this section. To make this determination, the generator must:

55 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (i) Each year document the basis for determining that the annual quantity of nonwastewaters expected to be generated will be less than 1,000 metric tons. (ii) Track the actual quantity of nonwastewaters generated from January 1 through December 31 of each year. If, at any time within the year, the actual waste quantity exceeds 1,000 metric tons, the generator must comply with the requirements of paragraph (d)(3) of this section for the remainder of the year. (iii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.

(iv) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:

(A) The quantity of dyes and/or pigment nonwastewaters generated. (B) The relevant process information used.

(C) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year. (3) Determination for generated quantities greater than 1,000 MT/yr for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is greater than 1,000 metric tons, the generator must perform all of the steps described in paragraphs ((d)(3)(i)-(d)(3)(xi) of this section) in order to make a determination that its waste is not K181.

(i) Determine which K181 constituents (see paragraph (c) of this section) are reasonably expected to be present in the wastes based on knowledge of the wastes (e.g., based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed).

(ii) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. For determinations based on use of knowledge, the generator must comply with the procedures for using knowledge described in paragraph (d)(2) of this section and keep the records described in paragraph (d)(2)(iv) of this section. For determinations based on sampling and analysis, the generator must comply with the sampling and analysis and recordkeeping requirements described below in this section.

(iii) Develop a waste sampling and analysis plan (or modify an existing plan) to collect and analyze representative waste samples for the K181 constituents reasonably expected to be present in the wastes. At a minimum, the plan must include:

(A) A discussion of the number of samples needed to characterize the wastes fully;

(B) The planned sample collection method to obtain representative waste samples;

(C) A discussion of how the sampling plan accounts for potential temporal and spatial variability of the wastes.

56 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (D) A detailed description of the test methods to be used, including sample preparation, clean up (if necessary), and determinative methods. (iv) Collect and analyze samples in accordance with the waste sampling and analysis plan.

(A) The sampling and analysis must be unbiased, precise, and representative of the wastes.

(B) The analytical measurements must be sufficiently sensitive, accurate and precise to support any claim that the constituent mass loadings are below the listing levels of paragraph (c) of this section. (v) Record the analytical results.

(vi) Record the waste quantity represented by the sampling and analysis results. (vii) Calculate constituent-specific mass loadings (product of concentrations and waste quantity).

(viii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.

(ix) Determine whether the mass of any of the K181 constituents listed in paragraph (c) of this section generated between January 1 and December 31 of any year is below the K181 listing levels.

(x) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:

(A) The sampling and analysis plan.

(B) The sampling and analysis results (including QA/QC data) (C) The quantity of dyes and/or pigment nonwastewaters generated. (D) The calculations performed to determine annual mass loadings. (xi) Nonhazardous waste determinations must be conducted annually to verify that the wastes remain nonhazardous.

(A) The annual testing requirements are suspended after three consecutive successful annual demonstrations that the wastes are nonhazardous. The generator can then use knowledge of the wastes to support subsequent annual determinations.

(B) The annual testing requirements are reinstated if the manufacturing or waste treatment processes generating the wastes are significantly altered, resulting in an increase of the potential for the wastes to exceed the listing levels.

(C) If the annual testing requirements are suspended, the generator must keep records of the process knowledge information used to support a nonhazardous determination. If testing is reinstated, a description of the process change must be retained.

57 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (4) Recordkeeping for the landfill disposal and combustion exemptions. For the purposes of meeting the landfill disposal and combustion condition set out in the K181 listing description, the generator must maintain on site for three years documentation demonstrating that each shipment of waste was received by a landfill unit that is subject to or meets the landfill design standards set out in the listing description, or was treated in combustion units as specified in the listing description. (5) Waste holding and handling. During the interim period, from the point of generation to completion of the hazardous waste determination, the generator is responsible for storing the wastes appropriately. If the wastes are determined to be hazardous and the generator has not complied with the subtitle C requirements during the interim period, the generator could be subject to an enforcement action for improper management. § 261.33 Discarded commercial chemical products, off specification species, container residues, and spill residues thereof.

The following materials or items are hazardous wastes if and when they are discarded or intended to be discarded as described in § 261.2(a)(2), when they are mixed with waste oil or used oil or other material and applied to the land for dust suppression or road treatment, when they are otherwise applied to the land in lieu of their original intended use or when they are contained in products that are applied to the land in lieu of their original intended use, or when, in lieu of their original intended use, they are produced for use as (or as a component of) a fuel, distributed for use as a fuel, or burned as a fuel, or when they are residues described in § 261.33(d) and are not recycled in accordance with § 261.2(e) within 90 days of the initial spill event.

(a) Any commercial chemical product, or manufacturing chemical intermediate having the generic name listed in paragraphs (e) or (f) of this section.

(b) Any off-specification commercial product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraphs (e) or (f) of this section. (c) Any residue remaining in a container or in an inner liner removed from a container that has held any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section, unless the container is empty as defined in § 261.7(b) or § 267.507 of these regulations.

[Comment: Unless the residue is being beneficially used or reused, or legitimately recycled or reclaimed; or being accumulated, stored, transported or treated prior to such use, re-use, recycling or reclamation, EPA considers the residue to be intended for discard, and thus a hazardous waste. An example of a legitimate re-use of the residue would be where the residue remains in the container and the container is used to hold the same commercial chemical product or manufacturing chemical product or manufacturing chemical intermediate it previously held. An example of the discard of the residue would be where the drum is sent to a drum reconditioner who reconditions the drum but discards the residue.].

(d) Any residue or contaminated soil, water or other debris resulting from the cleanup of a spill into or on any land or water of any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (a) through (d) of this section, or any residue or contaminated soil, water or other debris resulting from the cleanup of a spill, into or on any land or water, of any off-specification chemical product and manufacturing intermediate which, if it met specifications, would have the generic name listed in paragraphs (e) or (f) of this section. 58 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Note: Colorado’s regulations are more stringent than the federal regulations of 40 CFR § 261.33(d) with regard to application of P and U-listed waste codes to unused commercial chemical products. Pursuant to the comment at 40 CFR 261.33(d), the listed chemical must be the “sole active ingredient” to meet the listing description. In Colorado, formulations may have more than one active ingredient and still meet the listing description. (e) The commercial chemical products, manufacturing chemical intermediates or off specification commercial chemical products or manufacturing chemical intermediates referred to in paragraphs (a) through (d) of this section, are identified as acute hazardous wastes (H). [Comment: For the convenience of the regulated community the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), and R (Reactivity). Absence of a letter indicates that the compound only is listed for acute toxicity.] 59 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division These wastes and their corresponding EPA Hazardous Waste Numbers are: Hazardous Chemical Substance Common Name waste No. abstracts No.

P023 107-20-0 Acetaldehyde, chloro- Chloroacetaldehyde P002 591-08-2 Acetamide, N-(aminothioxomethyl)- 1-Acetyl-2-thiourea P057 640-19-7 Acetamide, 2-fluoro- Fluoroacetamide P058 62-74-8 Acetic acid, fluoro-, sodium salt Fluoroacetic acid, sodium salt P002 591-08-2 1-Acetyl-2-thiourea Same P003 107-02-8 Acrolein Same P070 116-06-3 Aldicarb Same P203 1646-88-4 Aldicarb sulfone Same P004 309-00-2 Aldrin Same P005 107-18-6 Allyl alcohol Same P006 20859-73-8 Aluminum phosphide (R,T) Same P007 2763-96-4 5-(Aminomethyl)-3-isoxazolol Muscimol P008 504-24-5 4-Aminopyridine Same P009 131-74-8 Ammonium picrate (R) Same P119 7803-55-6 Ammonium vanadate Ammonium metavanadate P099 506-61-6 Argentate(1-), bis(cyano-C)-, potassium Potassium silver cyanide P010 7778-39-4 Arsenic acid H3AsO4 Arsenic acid P012 1327-53-3 Arsenic oxide As2O3 Arsenic trioxide P011 1303-28-2 Arsenic oxide As2O5 Arsenic pentoxide P011 1303-28-2 Arsenic pentoxide Same P012 1327-53-3 Arsenic trioxide Same P038 692-42-2 Arsine, diethyl- Diethylarsine P036 696-28-6 Arsonous dichloride, phenyl- Dichlorophenylarsine P054 151-56-4 Aziridine Ethyleneimine P067 75-55-8 Aziridine, 2-methyl- Propyleneimine P013 542-62-1 Barium cyanide Same P024 106-47-8 Benzenamine, 4-chloro- 4-Chloroaniline P077 100-01-6 Benzenamine, 4-nitro- 4-Nitroaniline P028 100-44-7 Benzene, (chloromethyl)- Benzyl chloride 1,2-Benzenediol, P042 51-43-4 4-[1-hydroxy-2-(methylamino)ethyl]-, (R)- Epinephrine 60 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

P046 122-09-8 Benzeneethanamine, alpha,alpha-dimethyl- Phentermine P014 108-98-5 Benzenethiol Thiophenol 7-Benzofuranol, P127 1563-66-2 2,3-dihydro-2,2-dimethyl-,methylcarbamate Carbofuran Benzoic acid, 2-hydroxy-, compd. with (3aS- cis)-1,2,3,3a,8,8a-hexahydro-1, 3a,8- trimethylpyrrolo[2,3-b]indol-5-yl P188 57-64-7 methylcarbamate ester (1:1) Physostigmine, salicylate 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, & salts, when present at concentrations greater than Warfarin salts, when present at P001 181-81-2 0.3% concentrations greater than 0.3% P028 100-44-7 Benzyl chloride Same P015 7440-41-7 Beryllium powder Same P017 598-31-2 Bromoacetone Same P018 357-57-3 Brucine Same 2-Butanone, 3,3-dimethyl-1-(methylthio)-, O- P045 39196-18-4 [methylamino)carbonyl] oxime Thiofanox P021 592-01-8 Calcium cyanide Same P021 592-01-8 Calcium cyanide Ca(CN)2 Calcium cyanide Carbamic acid, [(dibutylamino)- thio]methyl-, P189 55285-14-8 2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester Carbosulfan Carbamic acid, dimethyl-, 1-[(dimethyl-amino)carbonyl]- 5-methyl-1H- P191 644-64-4 pyrazol-3-yl ester Dimetilan Carbamic acid, dimethyl-, 3-methyl-1- (1- P192 119-38-0 methylethyl)-1H- pyrazol-5-yl ester Isolan P190 1129-41-5 Carbamic acid, methyl-, 3-methylphenyl ester Metolcarb P127 1563-66-2 Carbofuran Same P022 75-15-0 Carbon disulfide Same P095 75-44-5 Carbonic dichloride Phosgene P189 55285-14-8 Carbosulfan Same P023 107-20-0 Chloroacetaldehyde Same P024 106-47-8 p-Chloroaniline 4-Chloroaniline P026 5344-82-1 1-(o-Chlorophenyl)thiourea 2-Chlorophenylthiourea P027 542-76-7 3-Chloropropionitrile Same P029 544-92-3 Copper cyanide Same P029 544-92-3 Copper cyanide Cu(CN) Copper cyanide P202 64-00-6 m-Cumenyl methylcarbamate Phenol, 3(1-methylethyl)-, 61 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

methylcarbamate Cyanides (soluble cyanide salts), not P030 57-12-5 otherwise specified Same P031 460-19-5 Cyanogen Same P033 506-77-4 Cyanogen chloride Same P033 506-77-4 Cyanogen chloride (CN)Cl Cyanogen chloride P034 131-89-5 2-Cyclohexyl-4,6-dinitrophenol 2,4-Dinitro-6-cyclohexylphenol P016 542-88-1 Dichloromethyl ether Bis(chloromethyl) ether P036 696-28-6 Dichlorophenylarsine Same P037 60-57-1 Dieldrin Same P038 692-42-2 Diethylarsine Same P041 311-45-5 Diethyl-p-nitrophenyl phosphate Paraoxon P040 297-97-2 O,O-Diethyl O-pyrazinyl phosphorothioate Thionazin P043 55-91-4 Diisopropylfluorophosphate (DFP) Same 1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10- hexa- chloro-1,4,4a,5,8,8a,-hexahydro-, P004 309-00-2 (1alpha,4alpha,4abeta,5alpha,8alpha,8abeta)- Aldrin 1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10- hexa- chloro-1,4,4a,5,8,8a-hexahydro-, P060 465-73-6 (1alpha,4alpha,4abeta,5beta,8beta,8abeta)- Isodrin 2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-oct ahydro-, (1aalpha,2beta,2aalpha,3beta,6beta,6aalpha, P037 60-57-1 7b eta, 7aalpha)- Dieldrin 2,7:3,6-Dimethanonaphth [2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-oct ahydro-, (1aalpha,2beta,2abeta,3alpha,6alpha,6abeta, P051 172-20-8 7b eta, 7aalpha)-, & metabolites Endrin P044 60-51-5 Dimethoate Same P046 122-09-8 alpha,alpha-Dimethylphenethylamine Phentermine P191 644-64-4 Dimetilan Same P047 1534-52-1 4,6-Dinitro-o-cresol, & salts Same P048 51-28-5 2,4-Dinitrophenol Same P020 88-85-7 Dinoseb Same P085 152-16-9 Diphosphoramide, octamethyl- Schradan 62 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

P111 107-49-3 Diphosphoric acid, tetraethyl ester Tetraethyl pyrophosphate P039 298-04-4 Disulfoton Same P049 541-53-7 Dithiobiuret 2,4-Dithiobiuret 1,3-Dithiolane-2-carboxaldehyde, 2,4- P185 26419-73-8 dimethyl-, O-[(methylamino)- carbonyl]oxime Tirpate P050 115-29-7 Endosulfan Same P088 145-73-3 Endothall Same P051 72-20-8 Endrin Same P051 72-20-8 Endrin, & metabolites Same P042 51-43-4 Epinephrine Same P031 460-19-5 Ethanedinitrile Cyanogen Ethanimidothioic acid, P066 16752-77-5 N-[[(methylamino)carbonyl]oxy]-, methyl ester Methomyl Ethanimidothioic acid, 2-(dimethylamino)-N-[[(methylamino)

P194 23135-22-0 carbonyl]oxy]-2-oxo-, methyl ester. Oxamyl P101 107-12-0 Ethyl cyanide Propionitrile P054 151-56-4 Ethyleneimine Same P097 52-85-7 Famphur Same P056 7782-41-4 Fluorine Same P057 640-19-7 Fluoroacetamide Same P058 62-74-8 Fluoroacetic acid, sodium salt Sodium fluoroacetate P198 23422-53-9 Formetanate hydrochloride Same P197 17702-57-7 Formparanate Same P065 628-86-4 Fulminic acid, mercury(2+) salt (R,T) Mercury fulminate P059 76-44-8 Heptachlor Same P062 757-58-4 Hexaethyl tetraphosphate Same P116 79-19-6 Hydrazinecarbothioamide 1-Amino-2-thiourea P068 60-34-4 Hydrazine, methyl- Methyl hydrazine P063 74-90-8 Hydrocyanic acid Hydrogen cyanide P063 74-90-8 Hydrogen cyanide Same P096 7803-51-2 Hydrogen phosphide Phosphine P060 465-73-6 Isodrin Same P192 119-38-0 Isolan Same P202 64-00-6 3-Isopropylphenyl N-methylcarbamate m-Cumenyl methylcarbamate 63 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

P007 2763-96-4 3(2H)-Isoxazolone, 5-(aminomethyl)- Muscimol Manganese, bis(dimethylcarbamodithioato- Manganese P196 15339-36-3 S,S')- dimethyldithiocarbamate P196 15339-36-3 Manganese dimethyldithiocarbamate Same P092 62-38-4 Mercury, (acetato-O)phenyl- Phenylmercury acetate P065 628-86-4 Mercury fulminate (R,T) Same P082 62-75-9 Methanamine, N-methyl-N-nitroso- N-Nitrosodimethylamine P064 624-83-9 Methane, isocyanato- Methyl isocyanate P016 542-88-1 Methane, oxybis[chloro- Bis(chloromethyl) ether P112 509-14-8 Methane, tetranitro- (R) Tetranitromethane P118 75-70-7 Methanethiol, trichloro- Trichloromethyl mercaptan Methanimidamide, N,N-dimethyl-N'-[3-[[(methylamino)-carbonyl P198 23422-53-9 ] oxy]phenyl]-, monohydrochloride Formetanate hydrochloride Methanimidamide, N,N-dimethyl-N'-[2-methyl-4-[[(methylamino)

carbonyl] P197 17702-57-7 oxy]phenyl]- Formparanate 6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10- P050 115-29-7 hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide Endosulfan 4,7-Methano-1H-indene, 1,4,5,6,7,8,8- P059 76-44-8 heptachloro- 3a,4,7,7a-tetrahydro- Heptachlor P199 2032-65-7 Methiocarb Same P066 16752-77-5 Methomyl Same P068 60-34-4 Methyl hydrazine Same P064 624-83-9 Methyl isocyanate Same P069 75-86-5 2-Methyllactonitrile Acetone cyanohydrin P071 298-00-0 Methyl parathion Same P190 1129-41-5 Metolcarb Same P128 315-18-4 Mexacarbate Same P072 86-88-4 alpha-Naphthylthiourea Same P073 13463-39-3 Nickel carbonyl Same P073 13463-39-3 Nickel carbonyl Ni(CO)4, (T-4)- Nickel carbonyl P074 557-19-7 Nickel cyanide Same P074 557-19-7 Nickel cyanide Ni(CN)2 Nickel cyanide 64 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Nicotine, & salts (this listing does not include patches, gums and lozenges that are FDA- approved over-the-counter nicotine P075 154-11-5 replacement therapies). Same P076 10102-43-9 Nitric oxide Same P077 100-01-6 p-Nitroaniline Same P078 10102-44-0 Nitrogen dioxide Same P076 10102-43-9 Nitrogen oxide NO Nitric Oxide P078 10102-44-0 Nitrogen oxide NO2 Nitrogen dioxide P081 55-63-0 Nitroglycerine (R) Nitroglycerin P082 62-75-9 N-Nitrosodimethylamine Same P084 4549-40-0 N-Nitrosomethylvinylamine Same P085 152-16-9 Octamethylpyrophosphoramide Schradan P087 20816-12-0 Osmium oxide OsO4, (T-4)- Osmium tetroxide P087 20816-12-0 Osmium tetroxide Same 7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic P088 145-73-3 acid Endothall P194 23135-22-0 Oxamyl Same P089 56-38-2 Parathion Same P034 131-89-5 Phenol, 2-cyclohexyl-4,6-dinitro- 2,4-Dinitro-6-cyclohexylphenol Phenol, 4-(dimethylamino)-3,5-dimethyl-, P128 315-18-4 methylcarbamate (ester) Mexacarbate Phenol, (3,5-dimethyl-4-(methylthio)-, P199 2032-65-7 methylcarbamate Methiocarb P048 51-28-5 Phenol, 2,4-dinitro- 2,4-Dinitrophenol P047 1534-52-1 Phenol, 2-methyl-4,6-dinitro-, & salts 4,6-Dinitro-o-cresol, & salts P202 64-00-6 Phenol, 3-(1-methylethyl)-, methyl carbamate m-Cumenyl methylcarbamate Phenol, 3-methyl-5-(1-methylethyl)-, methyl P201 2631-37-0 carbamate Promecarb P020 88-85-7 Phenol, 2-(1-methylpropyl)-4,6-dinitro- Dinoseb P009 131-74-8 Phenol, 2,4,6-trinitro-, ammonium salt (R) Ammonium picrate P092 62-38-4 Phenylmercury acetate Same P093 103-85-5 Phenylthiourea Same P094 298-02-2 Phorate Same P095 75-44-5 Phosgene Same P096 7803-51-2 Phosphine Same P041 311-45-5 Phosphoric acid, diethyl 4-nitrophenyl ester Paraoxon 65 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Phosphorodithioic acid, O,O-diethyl S-[2- P039 298-04-4 (ethylthio)ethyl] ester Disulfoton Phosphorodithioic acid, O,O-diethyl S- P094 298-02-2 [(ethylthio)methyl] ester Phorate Phosphorodithioic acid, O,O-dimethyl S-[2- P044 60-51-5 (methylamino)-2-oxoethyl] ester Dimethoate Phosphorofluoridic acid, bis(1-methylethyl) Diisopropylfluorophosphate P043 55-91-4 ester (DFP)

Phosphorothioic acid, O,O-diethyl O-(4- P089 56-38-2 nitrophenyl) ester Parathion Phosphorothioic acid, O,O-diethyl O-pyrazinyl P040 297-97-2 ester Thionazin Phosphorothioic acid, O-[4-[(dimethylamino)sulfonyl]phenyl] O,O- P097 52-85-7 dimethyl ester Famphur Phosphorothioic acid, O,O,-dimethyl O-(4- P071 298-00-0 nitrophenyl) ester Methyl parathion P204 57-47-6 Physostigmine Same P188 57-64-7 Physostigmine salicylate Same P110 78-00-2 Plumbane, tetraethyl- Tetraethyl lead P098 151-50-8 Potassium cyanide Same P098 151-50-8 Potassium cyanide K(CN) Potassium cyanide P099 506-61-6 Potassium silver cyanide Same P201 2631-37-0 Promecarb Same Propanal, 2-methyl-2-(methyl-sulfonyl)-, O- P203 1646-88-4 [(methylamino) carbonyl] oxime Aldicarb sulfone Propanal, 2-methyl-2-(methylthio)-, O- P070 116-06-3 [(methylamino)carbonyl]oxime Aldicarb P101 107-12-0 Propanenitrile Propionitrile P027 542-76-7 Propanenitrile, 3-chloro- 3-Chloropropionitrile P069 75-86-5 Propanenitrile, 2-hydroxy-2-methyl- Acetone cyanohydrin P081 55-63-0 1,2,3-Propanetriol, trinitrate (R) Nitroglycerin P017 598-31-2 2-Propanone, 1-bromo- Bromoacetone P102 107-19-7 Propargyl alcohol Same P003 107-02-8 2-Propenal Acrolein P005 107-18-6 2-Propen-1-ol Allyl alcohol P067 75-55-8 1,2-Propylenimine Same P102 107-19-7 2-Propyn-1-ol Propargyl alcohol P008 504-24-5 4-Pyridinamine 4-aminopyridine 66 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-, & salts (this listing does not include patches, gums and lozenges that are FDA-approved over-the-counter nicotine replacement P075 154-11-5 therapies). Nicotine, & Nicotine salts Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-, P204 57-47-6 methylcarbamate (ester), (3aS-cis)- Physostigmine P114 12039-52-0 Selenious acid, dithallium(1+) salt Thallium selenide P103 630-10-4 Selenourea Same P104 506-64-9 Silver cyanide Same P104 506-64-9 Silver cyanide Ag(CN) Silver cyanide P105 26628-22-8 Sodium azide Same P106 143-33-9 Sodium cyanide Same P106 143-33-9 Sodium cyanide Na(CN) Sodium cyanide P108 157-24-9 Strychnidin-10-one, & salts Strychnine, & salts P018 357-57-3 Strychnidin-10-one, 2,3-dimethoxy- Brucine P108 157-24-9 Strychnine, & salts Same P115 7446-18-6 Sulfuric acid, dithallium(1+) salt Thallous sulfate P109 3689-24-5 Tetraethyldithiopyrophosphate Dithion P110 78-00-2 Tetraethyl lead Same P111 107-49-3 Tetraethyl pyrophosphate Same P112 509-14-8 Tetranitromethane (R) Same P062 757-58-4 Tetraphosphoric acid, hexaethyl ester Hexaethyl tetraphosphate P113 1314-32-5 Thallic oxide Same P113 1314-32-5 Thallium oxide Tl2O3 Thallic oxide P114 12039-52-0 Thallium(I) selenite Thallium selenide P115 7446-18-6 Thallium(I) sulfate Same P109 3689-24-5 Thiodiphosphoric acid, tetraethyl ester Dithion P045 39196-18-4 Thiofanox Same P049 541-53-7 Thioimidodicarbonic diamide [(H2N)C(S)]2NH 2,4-Dithiobiuret P014 108-98-5 Thiophenol Same P116 79-19-6 Thiosemicarbazide 1-amino-2-thiourea P026 5344-82-1 Thiourea, (2-chlorophenyl)- N-(2-Chlorophenyl)thiourea P072 86-88-4 Thiourea, 1-naphthalenyl- alpha-Naphthylthiourea P093 103-85-5 Thiourea, phenyl- 1-Phenyl-2-thiourea 67 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

P185 26419-73-8 Tirpate Same P123 8001-35-2 Toxaphene Same P118 75-70-7 Trichloromethanethiol Trichloromethyl mercaptan P119 7803-55-6 Vanadic acid, ammonium salt Ammonium metavanadate P120 1314-62-1 Vanadium oxide V2O5 Vanadium pentoxide P120 1314-62-1 Vanadium pentoxide Same P084 4549-40-0 Vinylamine, N-methyl-N-nitroso- N-Nitrosomethylvinylamine Warfarin, & salts, when present at P001 181-81-2 concentrations greater than 0.3% Same P205 137-30-4 Zinc, bis(dimethylcarbamodithioato-S,S')- Ziram P121 557-21-1 Zinc cyanide Same P121 557-21-1 Zinc cyanide Zn(CN)2 Zinc cyanide Zinc phosphide Zn3P2, when present at P122 1314-84-7 concentrations greater than 10% (R,T) Same P205 137-30-4 Ziram Same bis(2-chloroethyl)sulfide (Residues resulting from treatment of this waste are included in the K901 listing and do not carry the P909 code. Soils, water, debris, or containers contaminated with this waste are included in the K902 listing and do not carry the P909 Mustard, Mustard Agent, P9092 505-60-2 code.) Mustard Gas, H, HD bis(2-chloroethyl)sulfide and bis (2-chloroethylthio)ethyl ether (Residues resulting from treatment of this waste are included in the K901 listing and do not carry the P910 code. Soils, water, debris, or containers contaminated with this waste are 505-60-2, included in the K902 listing and do not carry Mustard, Mustard Agent, P9102 63918-89-8 the P910 code.) Mustard Gas, HT, Mustard T 0-isopropyl methylphosphonofluoridate (Residues resulting from treatment of this waste are included in the K901 listing and do not carry the P911 code. Soils, water, debris, or containers contaminated with this waste are included in the K902 listing and do not carry P911 107-44-8 the P911 code.) GB, Sarin FOOTNOTE: 1CAS Number given for parent compound only.

2 H- Mustard made by the Levinstein process; typically has 25% impurities. HD- Distilled mustard containing 5% impurities.

HT- 60:40 mixture of HD and T.

T- bis(2-chloroethylthio)ethyl ether.

68 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (f) The commercial chemical products, manufacturing chemical intermediates, or off specification commercial chemical products referred to in paragraphs (a) through (d) of this section, are identified as toxic wastes (T), unless otherwise designated. [Comment: For the convenience of the regulated community, the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), R (Reactivity), I (Ignitability) and C (Corrosivity). Absence of a letter indicates that the compound is only listed for toxicity. Wastes are first listed in alphabetical order by substance and then listed again in numerical order by Hazardous Waste Number.]] 69 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division These wastes and their corresponding EPA Hazardous Waste Numbers are: Hazardous Chemical Substance Common Name waste No. abstracts No.

U394 30558-43-1 A2213 Same U001 75-07-0 Acetaldehyde (I) Same U034 75-87-6 Acetaldehyde, trichloro- Chloral U187 62-44-2 Acetamide, N-(4-ethoxyphenyl)- Phenacetin U005 53-96-3 Acetamide, N-9H-fluoren-2-yl- 2-Acetylaminofluorene U240 194-75-7 Acetic acid, (2,4-dichlorophenoxy)-, salts & esters 2,4-D U112 141-78-6 Acetic acid ethyl ester (I) Ethyl acetate U144 301-04-2 Acetic acid, lead(2+) salt Lead acetate U214 563-68-8 Acetic acid, thallium(1+) salt Thallium (I) acetate see F027 93-76-5 Acetic acid, (2,4,5-trichlorophenoxy)- 2,4,5-T U002 67-64-1 Acetone (I) Same U003 75-05-8 Acetonitrile (I,T) Same U004 98-86-2 Acetophenone Same U005 53-96-3 2-Acetylaminofluorene Same U006 75-36-5 Acetyl chloride (C,R,T) Same U007 79-06-1 Acrylamide Same U008 79-10-7 Acrylic acid (I) Same U009 107-13-1 Acrylonitrile Same U011 61-82-5 Amitrole Same U012 62-53-3 Aniline (I,T) Same U136 75-60-5 Arsinic acid, dimethyl- Dimethylarsenic acid U014 492-80-8 Auramine Same U015 115-02-6 Azaserine Same Azirino[2',3':3,4]pyrrolo[1,2-a]indole-4,7- dione, 6- amino-8- [[(aminocarbonyl)oxy]methyl]- 1,1a,2,8,8a,8b- hexahydro-8a-methoxy-5-methyl-, U010 50-07-7 [1aS- (1aalpha, 8beta,8aalpha,8balpha)]- Mitomycin C U280 101-27-9 Barban Same U278 22781-23-3 Bendiocarb Same U364 22961-82-6 Bendiocarb phenol Same U271 17804-35-2 Benomyl Same U157 56-49-5 Benz[j]aceanthrylene, 1,2-dihydro-3-methyl- 3-Methylcholanthrene 70 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U016 225-51-4 Benz[c]acridine Same U017 98-87-3 Benzal chloride Same Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2- U192 23950-58-5 propynyl)- Pronamide U018 56-55-3 Benz[a]anthracene Same 7,12- U094 57-97-6 Benz[a]anthracene, 7,12-dimethyl- Dimethylbenz[a]anthracene U012 62-53-3 Benzenamine (I,T) Aniline Benzenamine, 4,4'-carbonimidoylbis[N,N- U014 492-80-8 dimethyl- Auramine 4-Chloro-o-toluidine U049 3165-93-3 Benzenamine, 4-chloro-2-methyl-, hydrochloride hydrochloride 4- U093 60-11-7 Benzenamine, N,N-dimethyl-4-(phenylazo)- (Dimethylamino)azobenzene U328 95-53-4 Benzenamine, 2-methyl- 2-aminotoluene U353 106-49-0 Benzenamine, 4-methyl- 4-aminotoluene 4,4'-Methylenebis(2- U158 101-14-4 Benzenamine, 4,4'-methylenebis[2-chloro- chloroaniline) 2-Methylaniline U222 636-21-5 Benzenamine, 2-methyl-, hydrochloride hydrochloride U181 99-55-8 Benzenamine, 2-methyl-5-nitro- 5-Nitro-o-toluidine U019 71-43-2 Benzene (I,T) Same Benzeneacetic acid, 4-chloro-alpha-(4- U038 510-15-6 chlorophenyl)-alpha-hydroxy-, ethyl ester Chlorobenzilate U030 101-55-3 Benzene, 1-bromo-4-phenoxy- 4-Bromophenyl phenyl ether Benzenebutanoic acid, 4-[bis(2- U035 305-03-3 chloroethyl)amino]- Chlorambucil U037 108-90-7 Benzene, chloro- Chlorobenzene U221 25376-45-8 Benzenediamine, ar-methyl- Toluenediamine 1,2-Benzenedicarboxylic acid, bis(2- ethylhexyl)

U028 117-81-7 ester Diethylhexyl phthalate U069 84-74-2 1,2-Benzenedicarboxylic acid, dibutyl ester Dibutyl phthalate U088 84-66-2 1,2-Benzenedicarboxylic acid, diethyl ester Diethyl phthalate U102 131-11-3 1,2-Benzenedicarboxylic acid, dimethyl ester Dimethyl phthalate U107 117-84-0 1,2-Benzenedicarboxylic acid, dioctyl ester Di-n-octyl phthalate U070 95-50-1 Benzene, 1,2-dichloro- 1,2-Dichlorobenzene U071 541-73-1 Benzene, 1,3-dichloro- 1,3-Dichlorobenzene U072 106-46-7 Benzene, 1,4-dichloro- 1,4-Dichlorobenzene 71 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Benzene, 1,1'-(2,2-dichloroethylidene)bis[4- U060 72-54-8 chloro- DDD U017 98-87-3 Benzene, (dichloromethyl)- Benzal chloride U223 26471-62-5 Benzene, 1,3-diisocyanatomethyl- (R,T) Toluene diisocyanate U239 1330-20-7 Benzene, dimethyl- (I,T) Xylene U201 108-46-3 1,3-Benzenediol Resorcinol U127 118-74-1 Benzene, hexachloro- Hexachlorobenzene U056 110-82-7 Benzene, hexahydro- (I) Cyclohexane U220 108-88-3 Benzene, methyl- Toluene U105 121-14-2 Benzene, 1-methyl-2,4-dinitro- 2,4-Dinitrotoluene U106 606-20-2 Benzene, 2-methyl-1,3-dinitro- 2,6-Dinitrotoluene U055 98-82-8 Benzene, (1-methylethyl)- (I) Cumene U169 98-95-3 Benzene, nitro- Nitrobenzene U183 608-93-5 Benzene, pentachloro- Pentachlorobenzene Pentachloronitrobenzene U185 82-68-8 Benzene, pentachloronitro- (PCNB)

U020 98-09-9 Benzenesulfonic acid chloride (C,R) Benzenesulfonyl chloride U020 98-09-9 Benzenesulfonyl chloride (C,R) Same U207 95-94-3 Benzene, 1,2,4,5-tetrachloro- 1,2,4,5-Tetrachlorobenzene Benzene, 1,1'-(2,2,2-trichloroethylidene)bis[4- U061 50-29-3 chloro- DDT Benzene, 1,1'-(2,2,2-trichloroethylidene)bis[4- U247 72-43-5 methoxy- Methoxychlor U023 98-07-7 Benzene, (trichloromethyl)- Benzotrichloride U234 99-35-4 Benzene, 1,3,5-trinitro- 1,3,5-Trinitrobenzene U021 92-87-5 Benzidine Same 1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl U278 22781-23-3 carbamate Bendiocarb U364 22961-82-6 1,3-Benzodioxol-4-ol, 2,2-dimethyl- Bendiocarb phenol U203 94-59-7 1,3-Benzodioxole, 5-(2-propenyl)- Safrole U141 120-58-1 1,3-Benzodioxole, 5-(1-propenyl)- Isosafrole U090 94-58-6 1,3-Benzodioxole, 5-propyl- Dihydrosafrole U367 1563-38-8 7-Benzofuranol, 2,3-dihydro-2,2-dimethyl Carbofuran phenol U064 189-55-9 Benzo[rst]pentaphene Dibenzo[a,i]pyrene 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo- 1- phenyl-butyl)-, & salts, when present at U248 181-81-2 concentrations of 0.3% or less Warfarin 72 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U022 50-32-8 Benzo[a]pyrene Same U197 106-51-4 p-Benzoquinone 1,4-Benzoquinone U023 98-07-7 Benzotrichloride (C,R,T) Same U085 1464-53-5 2,2'-Bioxirane 1,2:3,4-Diepoxybutane U021 92-87-5 [1,1'-Biphenyl]-4,4'-diamine Benzidine U073 91-94-1 [1,1'-Biphenyl]-4,4'-diamine, 3,3'-dichloro- 3,3'-Dichlorobenzidine U091 119-90-4 [1,1'-Biphenyl]-4,4'-diamine, 3,3'-dimethoxy- 3,3'-Dimethoxybenzidine U095 119-93-7 [1,1'-Biphenyl]-4,4'-diamine, 3,3'-dimethyl- 3,3'-Dimethylbenzidine U225 75-25-2 Bromoform Tribromomethane U030 101-55-3 4-Bromophenyl phenyl ether P-Bromophenyl phenyl ether U128 87-68-3 1,3-Butadiene, 1,1,2,3,4,4-hexachloro- Hexachloro-1,3-butadiene U172 924-16-3 1-Butanamine, N-butyl-N-nitroso- N-N-Dibutylnitrosoamine U031 71-36-3 1-Butanol (I) N-Butyl alcohol U159 78-93-3 2-Butanone (I,T) Methyl ethyl ketone (MEK) U160 1338-23-4 2-Butanone, peroxide (R,T) Methyl ethyl ketone peroxide U053 4170-30-3 2-Butenal Crotonaldehyde U074 764-41-0 2-Butene, 1,4-dichloro- (I,T) 1,4-Dichloro-2-butene 2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy- 2-(1- methoxyethyl)-3-methyl-1- oxobutoxy]methyl]- 2,3,5,7a-tetrahydro-1H- pyrrolizin-1-yl ester, [1S- U143 303-34-4 [1alpha(Z),7(2S*,3R*),7aalpha]]- Lasiocarpine U031 71-36-3 n-Butyl alcohol (I) Butanol U136 75-60-5 Cacodylic acid Same U032 13765-19-0 Calcium chromate Same U372 10605-21-7 Carbamic acid, 1H-benzimidazol-2-yl, methyl ester Carbendazim Carbamic acid, [1-[(butylamino)carbonyl]-1H- benzimidazol-2-yl]-, U271 17804-35-2 methyl ester Benomyl Carbamic acid, (3-chlorophenyl)-, 4-chloro-2- U280 101-27-9 butynyl ester Barban U238 51-79-6 Carbamic acid, ethyl ester Ethyl carbamate (urethane) U178 615-53-2 Carbamic acid, methylnitroso-, ethyl ester N-Nitroso-N-methylurethane U373 122-42-9 Carbamic acid, phenyl-, 1-methylethyl ester Propham Carbamic acid, [1,2-phenylenebis U409 23564-05-8 (iminocarbonothioyl)]bis-, dimethyl ester Thiophanate-methyl U097 79-44-7 Carbamic chloride, dimethyl- Dimethylcarbamoyl chloride 73 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Carbamodithioic acid, 1,2-ethanediylbis-, salts & Ethylenebisdithiocarbamic U114 1111-54-6 esters acid Carbamothioic acid, bis(1-methylethyl)-, S- (2,3- U062 2303-16-4 dichloro-2-propenyl) ester Diallate Carbamothioic acid, bis(1-methylethyl)-, S- (2,3,3- U389 2303-17-5 trichloro-2-propenyl) ester Triallate Carbamothioic acid, dipropyl-, S- (phenylmethyl)

U387 52888-80-9 ester Prosulfocarb U279 63-25-2 Carbaryl Same U372 10605-21-7 Carbendazim Same U367 1563-38-8 Carbofuran phenol Same U215 6533-73-9 Carbonic acid, dithallium(1+) salt Thallium (I) carbonate U033 353-50-4 Carbonic difluoride Carbon oxyfluoride U156 79-22-1 Carbonochloridic acid, methyl ester (I,T) Methyl chlorocarbonate U033 353-50-4 Carbon oxyfluoride (R,T) Same U211 56-23-5 Carbon tetrachloride Same U034 75-87-6 Chloral Same U035 305-03-3 Chlorambucil Same U036 57-74-9 Chlordane, alpha & gamma isomers Same U026 494-03-1 Chlornaphazin Same U037 108-90-7 Chlorobenzene Same U038 510-15-6 Chlorobenzilate Same U039 59-50-7 p-Chloro-m-cresol Same U042 110-75-8 2-Chloroethyl vinyl ether Same U044 67-66-3 Chloroform Same U046 107-30-2 Chloromethyl methyl ether Same U047 91-58-7 beta-Chloronaphthalene Same U048 95-57-8 o-Chlorophenol Same U049 3165-93-3 4-Chloro-o-toluidine, hydrochloride Same U032 13765-19-0 Chromic acid H2CrO4, calcium salt Calcium chromate U050 218-01-9 Chrysene Same U051 Creosote Same U052 1319-77-3 Cresol (Cresylic acid) Same U053 4170-30-3 Crotonaldehyde Same U055 98-82-8 Cumene (I) Same U246 506-68-3 Cyanogen bromide (CN)Br Cyanogen bromide 74 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U197 106-51-4 2,5-Cyclohexadiene-1,4-dione 1,4-Benzoquinone U056 110-82-7 Cyclohexane (I) Same Cyclohexane, 1,2,3,4,5,6-hexachloro- U129 58-89-9 ,(1alpha,2alpha,3beta,4alpha,5alpha,6beta)- Lindane U057 108-94-1 Cyclohexanone (I) Same U130 77-47-4 1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro- Hexachlorocyclopentadiene U058 50-18-0 Cyclophosphamide Same U240 194-75-7 2,4-D, salts & esters Same U059 20830-81-3 Daunomycin Same U060 72-54-8 DDD Same U061 50-29-3 DDT Same U062 2303-16-4 Diallate Same U063 53-70-3 Dibenz[a,h]anthracene Same U064 189-55-9 Dibenzo[a,i]pyrene Same U066 96-12-8 1,2-Dibromo-3-chloropropane Same U069 84-74-2 Dibutyl phthalate Same U070 95-50-1 o-Dichlorobenzene Same U071 541-73-1 m-Dichlorobenzene Same U072 106-46-7 p-Dichlorobenzene Same U073 91-94-1 3,3'-Dichlorobenzidine Same U074 764-41-0 1,4-Dichloro-2-butene (I,T) Same U075 75-71-8 Dichlorodifluoromethane Same U078 75-35-4 1,1-Dichloroethylene Same U079 156-60-5 1,2-Dichloroethylene Same U025 111-44-4 Dichloroethyl ether Same U027 108-60-1 Dichloroisopropyl ether Same U024 111-91-1 Dichloromethoxy ethane Same U081 120-83-2 2,4-Dichlorophenol Same U082 87-65-0 2,6-Dichlorophenol Same U084 542-75-6 1,3-Dichloropropene Same U085 1464-53-5 1,2:3,4-Diepoxybutane (I,T) Same U395 5952-26-1 Diethylene glycol, dicarbamate Same U108 123-91-1 1,4-Diethyleneoxide Same U028 117-81-7 Diethylhexyl phthalate Same 75 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U086 1615-80-1 N,N'-Diethylhydrazine Same U087 3288-58-2 O,O-Diethyl S-methyl dithiophosphate Same U088 84-66-2 Diethyl phthalate Same U089 56-53-1 Diethylstilbesterol Same U090 94-58-6 Dihydrosafrole Same U091 119-90-4 3,3'-Dimethoxybenzidine Same U092 124-40-3 Dimethylamine (I) Same U093 60-11-7 p-Dimethylaminoazobenzene Same U094 57-97-6 7,12-Dimethylbenz[a]anthracene Same U095 119-93-7 3,3'-Dimethylbenzidine Same U096 80-15-9 alpha,alpha-Dimethylbenzylhydroperoxide (R) Cumene hydroperoxide U097 79-44-7 Dimethylcarbamoyl chloride Same U098 57-14-7 1,1-Dimethylhydrazine Same U099 540-73-8 1,2-Dimethylhydrazine Same U101 105-67-9 2,4-Dimethylphenol Same U102 131-11-3 Dimethyl phthalate Same U103 77-78-1 Dimethyl sulfate Same U105 121-14-2 2,4-Dinitrotoluene Same U106 606-20-2 2,6-Dinitrotoluene Same U107 117-84-0 Di-n-octyl phthalate Same U108 123-91-1 1,4-Dioxane Same U109 122-66-7 1,2-Diphenylhydrazine Same U110 142-84-7 Dipropylamine (I) Same U111 621-64-7 Di-n-propylnitrosamine Same U041 106-89-8 Epichlorohydrin Same U001 75-07-0 Ethanal (I) Acetaldehyde U404 121-44-8 Ethanamine, N,N-diethyl- Triethylamine U174 55-18-5 Ethanamine, N-ethyl-N-nitroso- N-Nitrosodiethylamine 1,2-Ethanediamine, N,N-dimethyl-N'-2- pyridinyl- U155 91-80-5 N'-(2-thienylmethyl)- Methapyrilene U067 106-93-4 Ethane, 1,2-dibromo- Ethylene dibromide U076 75-34-3 Ethane, 1,1-dichloro- 1,1-Dichloroethane U077 107-06-2 Ethane, 1,2-dichloro- 1,2-Dichloroethane U131 67-72-1 Ethane, hexachloro- Hexachloroethane 76 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U024 111-91-1 Ethane, 1,1'-[methylenebis(oxy)]bis[2-chloro- Dichloromethoxy ethane U117 60-29-7 Ethane, 1,1'-oxybis-(I) Ethyl ether U025 111-44-4 Ethane, 1,1'-oxybis[2-chloro- Dichloroethyl ether U184 76-01-7 Ethane, pentachloro- Pentachloroethane U208 630-20-6 Ethane, 1,1,1,2-tetrachloro- 1,1,1,2-Tetrachloroethane U209 79-34-5 Ethane, 1,1,2,2-tetrachloro- 1,1,2,2-Tetrachloroethane U218 62-55-5 Ethanethioamide Thioacetamide U226 71-55-6 Ethane, 1,1,1-trichloro- 1,1,1-Trichloroethane U227 79-00-5 Ethane, 1,1,2-trichloro- 1,1,2-Trichloroethane Ethanimidothioic acid, N,N'- [thiobis[(methylimino)carbonyloxy]] bis-, dimethyl U410 59669-26-0 ester Thiodicarb Ethanimidothioic acid, 2-(dimethylamino)-N- U394 30558-43-1 hydroxy-2-oxo-, methyl ester A2213 Ethylene glycol monoethyl U359 110-80-5 Ethanol, 2-ethoxy- ether U173 1116-54-7 Ethanol, 2,2'-(nitrosoimino)bis- N-Nitrosodiethanolamine Diethylene glycol, U395 5952-26-1 Ethanol, 2,2'-oxybis-, dicarbamate dicarbamate U004 98-86-2 Ethanone, 1-phenyl- Acetophenone U043 75-01-4 Ethene, chloro- Vinyl chloride U042 110-75-8 Ethene, (2-chloroethoxy)- 2-Chloroethyl vinyl ether U078 75-35-4 Ethene, 1,1-dichloro- 1,1-Dichloroethylene U079 156-60-5 Ethene, 1,2-dichloro-, (E)- 1,2-Dichloroethylene U210 127-18-4 Ethene, tetrachloro- Tetrachloroethylene U228 79-01-6 Ethene, trichloro- Trichloroethylene U112 141-78-6 Ethyl acetate (I) Same U113 140-88-5 Ethyl acrylate (I) Same U238 51-79-6 Ethyl carbamate (urethane) Same U117 60-29-7 Ethyl ether (I) Same U114 1111-54-6 Ethylenebisdithiocarbamic acid, salts & esters Same U067 106-93-4 Ethylene dibromide Same U077 107-06-2 Ethylene dichloride Same U359 110-80-5 Ethylene glycol monoethyl ether Same U115 75-21-8 Ethylene oxide (I,T) Same U116 96-45-7 Ethylenethiourea Same 77 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U076 75-34-3 Ethylidene dichloride Same U118 97-63-2 Ethyl methacrylate Same U119 62-50-0 Ethyl methanesulfonate Same U120 206-44-0 Fluoranthene Same U122 50-00-0 Formaldehyde Same U123 64-18-6 Formic acid (C,T) Same U124 110-00-9 Furan (I) Same U125 98-01-1 2-Furancarboxaldehyde (I) Furfural U147 108-31-6 2,5-Furandione Maleic anhydride U213 109-99-9 Furan, tetrahydro-(I) Tetrahydrofuran U125 98-01-1 Furfural (I) Same U124 110-00-9 Furfuran (I) Same Glucopyranose, 2-deoxy-2-(3-methyl-3- U206 18883-66-4 nitrosoureido)-, D- Streptozotocin D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)- U206 18883-66-4 carbonyl]amino]- Streptozotocin U126 765-34-4 Glycidylaldehyde Same U163 70-25-7 Guanidine, N-methyl-N'-nitro-N-nitroso- MNNG U127 118-74-1 Hexachlorobenzene Same U128 87-68-3 Hexachlorobutadiene Same U130 77-47-4 Hexachlorocyclopentadiene Same U131 67-72-1 Hexachloroethane Same U132 70-30-4 Hexachlorophene Same U243 1888-71-7 Hexachloropropene Same U133 302-01-2 Hydrazine (R,T) Same U086 1615-80-1 Hydrazine, 1,2-diethyl- N,N-Diethylhydrazine U098 57-14-7 Hydrazine, 1,1-dimethyl- 1,1-Dimethylhydrazine U099 540-73-8 Hydrazine, 1,2-dimethyl- 1,2-Dimethylhydrazine U109 122-66-7 Hydrazine, 1,2-diphenyl- 1,2-Diphenylhydrazine U134 7664-39-3 Hydrofluoric acid (C,T) Same U134 7664-39-3 Hydrogen fluoride (C,T) Hydrofluoric acid U135 7783-06-4 Hydrogen sulfide Same U135 7783-06-4 Hydrogen sulfide H2S Same U096 80-15-9 Hydroperoxide, 1-methyl-1-phenylethyl- (R) Cumene hydroperoxide 78 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U116 96-45-7 2-Imidazolidinethione Ethylene thiourea U137 193-39-5 Indeno[1,2,3-cd]pyrene Same U190 85-44-9 1,3-Isobenzofurandione Phthalic anhydride U140 78-83-1 Isobutyl alcohol (I,T) Same U141 120-58-1 Isosafrole Same U142 143-50-0 Kepone Same U143 303-34-4 Lasiocarpine Same U144 301-04-2 Lead acetate Same U146 1335-32-6 Lead, bis(acetato-O)tetrahydroxytri- Lead subacetate U145 7446-27-7 Lead phosphate Same U146 1335-32-6 Lead subacetate Same U129 58-89-9 Lindane Same U163 70-25-7 MNNG Same U147 108-31-6 Maleic anhydride Same U148 123-33-1 Maleic hydrazide Same U149 109-77-3 Malononitrile Same U150 148-82-3 Melphalan Same U151 7439-97-6 Mercury Same U152 126-98-7 Methacrylonitrile (I, T) Same U092 124-40-3 Methanamine, N-methyl- (I) Dimethylamine U029 74-83-9 Methane, bromo- Methyl bromide U045 74-87-3 Methane, chloro- (I, T) Methyl chloride U046 107-30-2 Methane, chloromethoxy- Chloromethyl methyl ether U068 74-95-3 Methane, dibromo- Dibromomethane U080 75-09-2 Methane, dichloro- Dichloromethane U075 75-71-8 Methane, dichlorodifluoro- Dichlorodifluoromethane U138 74-88-4 Methane, iodo- Iodomethane U119 62-50-0 Methanesulfonic acid, ethyl ester Ethyl methane sulfonate U211 56-23-5 Methane, tetrachloro- Carbon tetrachloride U153 74-93-1 Methanethiol (I, T) Methyl mercaptan U225 75-25-2 Methane, tribromo- Tribromomethane U044 67-66-3 Methane, trichloro- Chloroform U121 75-69-4 Methane, trichlorofluoro- Trichlorofluoromethane 79 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8- U036 57-74-9 octachloro-2,3,3a,4,7,7a-hexahydro- Chlordane U154 67-56-1 Methanol (I) Same U155 91-80-5 Methapyrilene Same 1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2- one, 1,1a,3,3a,4,5,5,5a,5b,6- U142 143-50-0 decachlorooctahydro- Chlordecone U247 72-43-5 Methoxychlor Same U154 67-56-1 Methyl alcohol (I) Methanol U029 74-83-9 Methyl bromide Same U186 504-60-9 1-Methylbutadiene (I) 1,3-Pentadiene U045 74-87-3 Methyl chloride (I,T) Same U156 79-22-1 Methyl chlorocarbonate (I,T) Same U226 71-55-6 Methyl chloroform 1,1,1-Trichloroethane U157 56-49-5 3-Methylcholanthrene Same U158 101-14-4 4,4'-Methylenebis(2-chloroaniline) Same U068 74-95-3 Methylene bromide Dibromomethane U080 75-09-2 Methylene chloride Same U159 78-93-3 Methyl ethyl ketone (MEK) (I,T) Same U160 1338-23-4 Methyl ethyl ketone peroxide (R,T) Same U138 74-88-4 Methyl iodide Same U161 108-10-1 Methyl isobutyl ketone (I) Same U162 80-62-6 Methyl methacrylate (I,T) Same U161 108-10-1 4-Methyl-2-pentanone (I) Methyl isobutyl ketone U164 56-04-2 Methylthiouracil Same U010 50-07-7 Mitomycin C Same 5,12-Naphthacenedione, 8-acetyl-10-[(3- amino- 2,3,6-trideoxy)-alpha-L-lyxo- hexopyranosyl)oxy]- 7,8,9,10-tetrahydro- 6,8,11-trihydroxy-1-methoxy-, U059 20830-81-3 (8S-cis)- Daunomycin U167 134-32-7 1-Naphthalenamine Same U168 91-59-8 2-Naphthalenamine Same U026 494-03-1 Naphthalenamine, N,N'-bis(2-chloroethyl)- Chlornaphazine U165 91-20-3 Naphthalene Same U047 91-58-7 Naphthalene, 2-chloro- 2-Chloronaphthalene U166 130-15-4 1,4-Naphthalenedione 1,4-Naphthoquinone 80 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

2,7-Naphthalenedisulfonic acid, 3,3'-[(3,3'- dimethyl[1,1'-biphenyl]-4,4'-diyl)bis(azo)bis[5- U236 72-57-1 amino-4-hydroxy]-, tetrasodium salt U279 63-25-2 1-Naphthalenol, methylcarbamate Trypan blue U166 130-15-4 1,4-Naphthoquinone Carbaryl U167 134-32-7 alpha-Naphthylamine Same U168 91-59-8 beta-Naphthylamine Same U217 10102-45-1 Nitric acid, thallium(1+) salt Thallous nitrate U169 98-95-3 Nitrobenzene (I,T) Same U170 100-02-7 p-Nitrophenol Same U171 79-46-9 2-Nitropropane (I,T) Same U172 924-16-3 N-Nitrosodi-n-butylamine N,N-Dibutylnitrosoamine U173 1116-54-7 N-Nitrosodiethanolamine Same U174 55-18-5 N-Nitrosodiethylamine Same U176 759-73-9 N-Nitroso-N-ethylurea Same U177 684-93-5 N-Nitroso-N-methylurea Same U178 615-53-2 N-Nitroso-N-methylurethane Same U179 100-75-4 N-Nitrosopiperidine Same U180 930-55-2 N-Nitrosopyrrolidine Same U181 99-55-8 5-Nitro-o-toluidine Same U193 1120-71-4 1,2-Oxathiolane, 2,2-dioxide 1,3-Propane sultone 2H-1,3,2-Oxazaphosphorin-2-amine, N,N- bis(2- U058 50-18-0 chloroethyl)tetrahydro-, 2-oxide Cyclophosphamide U115 75-21-8 Oxirane (I,T) Ethylene oxide U126 765-34-4 Oxiranecarboxyaldehyde Glycidaldehyde U041 106-89-8 Oxirane, (chloromethyl)- Epichlorohydrin U182 123-63-7 Paraldehyde Same U183 608-93-5 Pentachlorobenzene Same U184 76-01-7 Pentachloroethane Same U185 82-68-8 Pentachloronitrobenzene (PCNB) Same See F027 87-86-5 Pentachlorophenol Same U161 108-10-1 Pentanol, 4-methyl- Methyl isobutyl ketone U186 504-60-9 1,3-Pentadiene (I) Same U187 62-44-2 Phenacetin Same U188 108-95-2 Phenol Same 81 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U048 95-57-8 Phenol, 2-chloro- o-chlorophenol U039 59-50-7 Phenol, 4-chloro-3-methyl- p-chloro-m-cresol U081 120-83-2 Phenol, 2,4-dichloro- 2,4-Dichlorophenol U082 87-65-0 Phenol, 2,6-dichloro- 2,6-Dichlorophenol U089 56-53-1 Phenol, 4,4'-(1,2-diethyl-1,2-ethenediyl)bis-, (E)- Diethylstilbestrol U101 105-67-9 Phenol, 2,4-dimethyl- 2,4-Dimethylphenol U052 1319-77-3 Phenol, methyl- Cresol (cresylic acid)

U132 70-30-4 Phenol, 2,2'-methylenebis[3,4,6-trichloro- Hexachlorophene U411 114-26-1 Phenol, 2-(1-methylethoxy)-,methylcarbamate Propoxur U170 100-02-7 Phenol, 4-nitro- p-Nitrophenol See F027 87-86-5 Phenol, pentachloro- Pentachlorophenol See F027 58-90-2 Phenol, 2,3,4,6-tetrachloro- 2,3,4,6-Tetrachlorophenol See F027 95-95-4 Phenol, 2,4,5-trichloro- 2,4,5-Trichlorophenol See F027 88-06-2 Phenol, 2,4,6-trichloro- 2,4,6-Trichlorophenol U150 148-82-3 L-Phenylalanine, 4-[bis(2-chloroethyl)amino]- Melphalan U145 7446-27-7 Phosphoric acid, lead(2+) salt (2:3) Lead phosphate O,O-Diethyl S-methyl U087 3288-58-2 Phosphorodithioic acid, O,O-diethyl S-methyl ester dithiophosphate U189 1314-80-3 Phosphorus sulfide (R) Phosphorus pentasulfide U190 85-44-9 Phthalic anhydride Same U191 109-06-8 2-Picoline Same U179 100-75-4 Piperidine, 1-nitroso- N-Nitrosopiperidine U192 23950-58-5 Pronamide Same U194 107-10-8 1-Propanamine (I,T) n-proylamine U111 621-64-7 1-Propanamine, N-nitroso-N-propyl- Di-n-propylnitrosamine U110 142-84-7 1-Propanamine, N-propyl- (I) Dipropylamine 1,2-Dibromo-3- U066 96-12-8 Propane, 1,2-dibromo-3-chloro- chloropropane U083 78-87-5 Propane, 1,2-dichloro- Propylene dichloride U149 109-77-3 Propanedinitrile Malononitrile U171 79-46-9 Propane, 2-nitro- (I,T) 2-Nitropropane U027 108-60-1 Propane, 2,2'-oxybis[2-chloro- Dichloroisopropyl ether U193 1120-71-4 1,3-Propane sultone Same See F027 93-72-1 Propanoic acid, 2-(2,4,5-trichlorophenoxy)- 2,4,5-TP 82 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

Tris(2,3-dibromopropyl)

U235 126-72-7 1-Propanol, 2,3-dibromo-, phosphate (3:1) phosphate U140 78-83-1 1-Propanol, 2-methyl- (I,T) Isobutyl alcohol U002 67-64-1 2-Propanone (I) Acetone U007 79-06-1 2-Propenamide Acrylamide U084 542-75-6 1-Propene, 1,3-dichloro- 1,3-Dichloropropene U243 1888-71-7 1-Propene, 1,1,2,3,3,3-hexachloro- Hexachloropropene U009 107-13-1 2-Propenenitrile Acrylonitrile U152 126-98-7 2-Propenenitrile, 2-methyl- (I,T) Methacrylonitrile U008 79-10-7 2-Propenoic acid (I) Acrylic acid U113 140-88-5 2-Propenoic acid, ethyl ester (I) Ethyl acrylate U118 97-63-2 2-Propenoic acid, 2-methyl-, ethyl ester Ethyl methacrylate U162 80-62-6 2-Propenoic acid, 2-methyl-, methyl ester (I,T) Methyl methacrylate U373 122-42-9 Propham Same U411 114-26-1 Propoxur Same U194 107-10-8 n-Propylamine (I,T) Same U083 78-87-5 Propylene dichloride Same U387 52888-80-9 Prosulfocarb Same U148 123-33-1 3,6-Pyridazinedione, 1,2-dihydro- Maleic hydrazide U196 110-86-1 Pyridine Same U191 109-06-8 Pyridine, 2-methyl- 2-Picoline 2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2- U237 66-75-1 chloroethyl)amino]- Uracil mustard 4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2- U164 56-04-2 thioxo- Methylthiouracil U180 930-55-2 Pyrrolidine, 1-nitroso- n-Nitrosopyrrolidine U200 50-55-5 Reserpine Same U201 108-46-3 Resorcinol Same U203 94-59-7 Safrole Same U204 7783-00-8 Selenious acid Selenium dioxide U204 7783-00-8 Selenium dioxide Same U205 7488-56-4 Selenium sulfide Same U205 7488-56-4 Selenium sulfide SeS2 (R,T) Selenium (IV) disulfide U015 115-02-6 L-Serine, diazoacetate (ester) Azarserine See F027 93-72-1 Silvex (2,4,5-TP) Same 83 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

U206 18883-66-4 Streptozotocin Same U103 77-78-1 Sulfuric acid, dimethyl ester Dimethyl sulfate U189 1314-80-3 Sulfur phosphide (R) Phosphorus pentasulfide See F027 93-76-5 2,4,5-T Same U207 95-94-3 1,2,4,5-Tetrachlorobenzene Same U208 630-20-6 1,1,1,2-Tetrachloroethane Same U209 79-34-5 1,1,2,2-Tetrachloroethane Same U210 127-18-4 Tetrachloroethylene Same See F027 58-90-2 2,3,4,6-Tetrachlorophenol Same U213 109-99-9 Tetrahydrofuran (I) Same U214 563-68-8 Thallium(I) acetate Same U215 6533-73-9 Thallium(I) carbonate Same U216 7791-12-0 Thallium(I) chloride Same U216 7791-12-0 Thallium chloride TlCl Thallous chloride U217 10102-45-1 Thallium(I) nitrate Thallous nitrate U218 62-55-5 Thioacetamide Same U410 59669-26-0 Thiodicarb Same U153 74-93-1 Thiomethanol (I,T) Methyl mercaptan Thioperoxydicarbonic diamide [(H2N)C(S)]2S2, U244 137-26-8 tetramethyl- Thiram U409 23564-05-8 Thiophanate-methyl Same U219 62-56-6 Thiourea Same U244 137-26-8 Thiram Same U220 108-88-3 Toluene Same U221 25376-45-8 Toluenediamine Same U223 26471-62-5 Toluene diisocyanate (R,T) Same U328 95-53-4 o-Toluidine Same U353 106-49-0 p-Toluidine Same U222 636-21-5 o-Toluidine hydrochloride Same U389 2303-17-5 Triallate Same U011 61-82-5 1H-1,2,4-Triazol-3-amine Amitrole U227 79-00-5 1,1,2-Trichloroethane Same U228 79-01-6 Trichloroethylene Same U121 75-69-4 Trichloromonofluoromethane Same 84 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Hazardous Chemical Substance Common Name waste No. abstracts No.

See F027 95-95-4 2,4,5-Trichlorophenol Same See F027 88-06-2 2,4,6-Trichlorophenol Same U404 121-44-8 Triethylamine Same U234 99-35-4 1,3,5-Trinitrobenzene (R,T) Same U182 123-63-7 1,3,5-Trioxane, 2,4,6-trimethyl- Paraldehyde U235 126-72-7 Tris(2,3-dibromopropyl) phosphate Same U236 72-57-1 Trypan blue Same U237 66-75-1 Uracil mustard Same U176 759-73-9 Urea, N-ethyl-N-nitroso- N-Nitroso-N-ethlurea U177 684-93-5 Urea, N-methyl-N-nitroso- N-Nitroso-N-methylurea U043 75-01-4 Vinyl chloride Same Warfarin, & salts, when present at concentrations U248 181-81-2 of 0.3% or less Same U239 1330-20-7 Xylene (I) Same Yohimban-16-carboxylic acid, 11,17- dimethoxy- 18-[(3,4,5-trimethoxybenzoyl)oxy]- , methyl ester, U200 50-55-5 (3beta,16beta,17alpha,18beta,20alpha)- Reserpine Zinc phosphide Zn3P2, when present at U249 1314-84-7 concentrations of 10% or less Zinc phosphide FOOTNOTE: 1CAS Number given for parent compound only.

85 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division § 261.35 Deletion of Certain Hazardous Waste Codes Following Equipment Cleaning and Replacement.

(a) Wastes from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives will not meet the listing definition of F032 once the generator has met all of the requirements of paragraphs (b) and (c) of this section. These wastes may, however, continue to meet another hazardous waste listing description or may exhibit one or more of the hazardous waste characteristics.

(b) Generators must either clean or replace all process equipment that may have come in contact with chlorophenolic formulations or constituents thereof, including, but not limited to: treatment cylinders, sumps, tanks, piping systems, drip pads, fork lifts, and trams in a manner which minimizes or eliminates the escape of hazardous waste or waste constituents, leachate, contaminated drippage, or hazardous waste decomposition products to the ground water, surface water, or atmosphere.

(1) Generators shall do one of the following:

(i) Prepare and follow an equipment cleaning plan and clean equipment in accordance with this section;

(ii) Prepare and follow an equipment replacement plan and replace equipment in accordance with this section; or (iii) Document cleaning and replacement in accordance with this section, carried out after termination of use of chlorophenolic preservations. (2) Cleaning Requirements.

(i) Prepare and sign a written equipment cleaning plan that describes: (A) The equipment to be cleaned;

(B) How the equipment will be cleaned;

(C) The solvent to be used in cleaning;

(D) How solvent rinses will be tested; and (E) How cleaning residues will be disposed.

(ii) Equipment must be cleaned as follows:

(A) Remove all visible residues from process equipment; (B) Rinse process equipment with an appropriate solvent until dioxins and dibenzofurans are not detected in the final solvent rinse. (iii) Analytical requirements.

(A) Rinses must be tested using an appropriate method.

86 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (B) “Not detected” means at or below the following lower method calibration limits (MCLs): The 2,3,7,8-TCDD-based MCL--0.01 parts per trillion (ppt), sample weight of 1000 g, IS spiking level of 1 ppt, final extraction volume of 10-50 µL. For other congeners--multiply the values by 1 for TCDF/PeCDD/PeCDF, by 2.5 for HxCDD/HxCDF/HpCDD/HpCDF, and by 5 for OCDD/OCDF.

(iv) The generator must manage all residues from the cleaning process as F032 waste.

(3) Replacement requirements.

(i) Prepare and sign a written equipment replacement plan that describes: (A) The equipment to be replaced;

(B) How the equipment will be replaced; and (C) How the equipment will be disposed.

(ii) The generator must manage the discarded equipment as F032 waste. (4) Documentation requirements.

(i) Document that previous equipment cleaning and/or replacement was performed in accordance with this section and occurred after cessation of use of chlorophenolic preservatives.

(c) The generator must maintain the following records documenting the cleaning and replacement as part of the facilities operating record:

(1) The name and address of the facility;

(2) Formulations previously used and the date on which their use ceased in each process at the plant;

(3) Formulations currently used in each process at the plant; (4) The equipment cleaning or replacement plan;

(5) The name and address of any persons who conducted the cleaning and replacement; (6) The dates on which the cleaning and replacement were accomplished; (7) The dates of sampling and testing;

(8) A description of the sample handling and preparation techniques, including techniques used for extraction, containerization, preservation, and chain-of-custody of the samples; (9) A description of the tests performed, the date the tests were performed, and the results of the tests;

(10) The name and model numbers of the instrument(s) used in performing the tests: (11) QA/QC documentation; and 87 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division (12) The following statement signed by the generator or his/her authorized representative: I certify under penalty of law that all process equipment required to be cleaned or replaced under § 261.35 of these regulations was cleaned or replaced as represented in the equipment cleaning and replacement plan and accompanying documentation. I am aware that there are significant penalties for providing false information, including the possibility of fine or imprisonment.

Appendix I Representative Sampling Methods The methods and equipment used for sampling waste materials will vary with the form and consistency of the waste materials to be sampled. Samples collected using the sampling protocols listed below, for sampling waste with properties similar to the indicated materials, will be considered by the Department to be representative of the wastes.

Extremely viscous liquid – ASTM Standard D140-70 Crushed or powdered material – ASTM Standard D346-75 Soil or rock like material – ASTM Standard D420-69 Soil like material – ASTM Standard D-1452 65 Fly ash like material – ASTM Standard D2234-76 [ASTM Standards are available from ASTM, 1916 Race St., Philadelphia, PA. 19103] Containerized liquid wastes “COLIWASA”

Liquid waste in pits, ponds, lagoons, and similar reservoirs. – “Pond Sampler.” This manual also contains additional information on application of these protocols. Appendix II to Part 261 – [Reserved] Appendix III to Part 261 – [Reserved] Appendix IV (Reserved for Radioactive Waste Test Methods) Appendix V (Reserved for Infectious Waste Treatment Specifications) Appendix VI (Reserved for Etiologic Agents)

88 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Appendix VII - Basis for Listing Hazardous Waste EPA hazardous Hazardous constituents for which listed waste No.

F001 Tetrachloroethylene, methylene chloride trichloroethylene, 1,1,1-trichloroethane, carbon tetrachloride, chlorinated fluorocarbons.

F002 Tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2-trifluoroethane, ortho- dichlorobenzene, trichlorofluoromethane.

F003 N.A.

F004 Cresols and cresylic acid, nitrobenzene.

F005 Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, 2-ethoxyethanol, benzene, 2-nitropropane.

F006 Cadmium, hexavalent chromium, nickel, cyanide (complexed). F007 Cyanide (salts).

F008 Cyanide (salts).

F009 Cyanide (salts).

F010 Cyanide (salts).

F011 Cyanide (salts).

F012 Cyanide (complexed).

F019 Hexavalent chromium, cyanide (complexed).

F020 Tetra- and pentachlorodibenzo-p-dioxins; tetra and pentachlorodi-benzofurans; tri- and tetrachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.

F021 Penta- and hexachlorodibenzo-p-dioxins; penta- and hexachlorodibenzofurans; pentachlorophenol and its derivatives.

F022 Tetra-, penta-, and hexachlorodibenzo-p-dioxins; tetra-, penta-, and hexachlorodibenzofurans.

F023 Tetra-, and pentachlorodibenzo-p-dioxins; tetra- and pentachlorodibenzofurans; tri- and tetrachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.

F024 Chloromethane, dichloromethane, trichloromethane, carbon tetrachloride, chloroethylene, 1,1-dichloroethane, 1,2-dichloroethane, trans-1-2-dichloroethylene, 1,1-dichloroethylene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethylene, 1,1,1,2-tetra-chloroethane, 1,1,2,2-tetrachloroethane, tetrachloroethylene, pentachloroethane, hexachloroethane, allyl chloride (3-chloropropene), dichloropropane, dichloropropene, 2-chloro-1,3-butadiene, hexachloro-1,3- butadiene, hexachlorocyclopentadiene, hexachlorocyclohexane, benzene, chlorbenzene, dichlorobenzenes, 1,2,4-trichlorobenzene, tetrachlorobenzene, pentachlorobenzene, hexachlorobenzene, toluene, naphthalene. 89 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

F025 Chloromethane; Dichloromethane; Trichloromethane; Carbon tetrachloride; Chloroethylene; 1,1-Dichloroethane; 1,2-Dichloroethane; trans-1,2-Dichloroethylene; 1,1-Dichloroethylene; 1,1,1-Trichloroethane; 1,1,2-Trichloroethane; Trichloroethylene; 1,1,1,2-Tetrachloroethane; 1,1,2,2-Tetrachloroethane; Tetrachloroethylene; Pentachloroethane; Hexachloroethane; Allyl chloride (3- Chloropropene); Dichloropropane; Dichloropropene; 2-Chloro-1,3-butadiene; Hexachloro-1,3-butadiene; Hexachlorocyclopentadiene; Benzene; Chlorobenzene; Dichlorobenzene; 1,2,4-Trichlorobenzene; Tetrachlorobenzene; Pentachlorobenzene; Hexachlorobenzene; Toluene; Naphthalene. F026 Tetra-, penta-, and hexachlorodibenzo-p-dioxins; tetra-, penta-, and hexachlorodibenzofurans.

F027 Tetra-, penta-, and hexachlorodibenzo-p-dioxins; tetra-, penta-, and hexachlorodibenzofurans; tri-, tetra-, and pentachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts. F028 Tetra-, penta-, and hexachlorodibenzo-p-dioxins; tetra-, penta-, and hexachlorodibenzofurans; tri-, tetra-, and pentachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts. F032 Benz(a)anthracene, benzo(a)pyrene, dibenz(a,h)-anthracene,indeno(1,2,3- cd)pyrene, pentachlorophenol, arsenic, chromium, tetra-, penta-, hexa-, heptachlorodibenzo-p-dioxins, tetra-, penta-, hexa-, heptachlorodibenzofurans. F034 Benz(a)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene, naphthalene, arsenic, chromium. F035 Arsenic, chromium, lead.

F037 Benzene, benzo(a)pyrene, chrysene, lead, chromium. F038 Benzene, benzo(a)pyrene, chrysene, lead, chromium. F039 All constituents for which treatment standards are specified for multi-source leachate (wastewaters and nonwastewaters) under 40 CFR 268.43(a), Table CCW. K001 Pentachlorophenol, phenol, 2-chlorophenol, p-chloro-m-cresol, 2,4-dimethylphenyl, 2,4-dinitrophenol, trichlorophenols, tetrachlorophenols, 2,4-dinitrophenol, creosote, chrysene, naphthalene, fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, benz(a)anthracene, dibenz(a)anthracene, acenaphthalene. K002 Hexavalent chromium, lead K003 Hexavalent chromium, lead.

K004 Hexavalent chromium.

K005 Hexavalent chromium, lead.

K006 Hexavalent chromium.

K007 Cyanide (complexed), hexavalent chromium.

K008 Hexavalent chromium.

K009 Chloroform, formaldehyde, methylene chloride, methyl chloride, paraldehyde, formic acid.

K010 Chloroform, formaldehyde, methylene chloride, methyl chloride, paraldehyde, formic acid, chloroacetaldehyde.

90 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

K011 Acrylonitrile, acetonitrile, hydrocyanic acid.

K013 Hydrocyanic acid, acrylonitrile, acetonitrile.

K014 Acetonitrile, acrylamide.

K015 Benzyl chloride, chlorobenzene, toluene, benzotrichloride. K016 Hexachlorobenzene, hexachlorobutadiene, carbon tetrachloride, hexachloroethane, perchloroethylene.

K017 Epichlorohydrin, chloroethers [bis(chloromethyl) ether and bis (2-chloroethyl) ethers], trichloropropane, dichloropropanols.

K018 1,2-dichloroethane, trichloroethylene, hexachlorobutadiene, hexachlorobenzene. K019 Ethylene dichloride, 1,1,1-trichloroethane, 1,1,2-trichloroethane, tetrachloroethanes (1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane), trichloroethylene, tetrachloroethylene, carbon tetrachloride, chloroform, vinyl chloride, vinylidene chloride.

K020 Ethylene dichloride, 1,1,1-trichloroethane, 1,1,2-trichloroethane, tetrachloroethanes (1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane), trichloroethylene, tetrachloroethylene, carbon tetrachloride, chloroform, vinyl chloride, vinylidene chloride.

K021 Antimony, carbon tetrachloride, chloroform.

K022 Phenol, tars (polycyclic aromatic hydrocarbons).

K023 Phthalic anhydride, maleic anhydride.

K024 Phthalic anhydride, 1,4-naphthoquinone.

K025 Meta-dinitrobenzene, 2,4-dinitrotoluene.

K026 Paraldehyde, pyridines, 2-picoline.

K027 Toluene diisocyanate, toluene-2, 4-diamine.

K028 1,1,1-trichloroethane, vinyl chloride.

K029 1,2-dichloroethane, 1,1,1-trichloroethane, vinyl chloride, vinylidene chloride, chloroform.

K030 Hexachlorobenzene, hexachlorobutadiene, hexachloroethane, 1,1,1,2- tetrachloroethane, 1,1,2,2-tetrachloroethane, ethylene dichloride. K031 Arsenic.

K032 Hexachlorocyclopentadiene.

K033 Hexachlorocyclopentadiene.

K034 Hexachlorocyclopentadiene.

K035 Creosote, chrysene, naphthalene, fluoranthene benzo(b) fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd) pyrene, benzo(a)anthracene, dibenzo(a)anthracene, acenaphthalene.

K036 Toluene, phosphorodithioic and phosphorothioic acid esters. K037 Toluene, phosphorodithioic and phosphorothioic acid esters. K038 Phorate, formaldehyde, phosphorodithioic and phosphorothioic acid esters. 91 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

K039 Phosphorodithioic and phosphorothioic acid esters. K040 Phorate, formaldehyde, phosphorodithioic and phosphorothioic acid esters. K041 Toxaphene.

K042 Hexachlorobenzene, ortho-dichlorobenzene.

K043 2,4-dichlorophenol, 2,6-dichlorophenol, 2,4,6-trichlorophenol. K044 N.A.

K045 N.A.

K046 Lead.

K047 N.A.

K048 Hexavalent chromium, lead.

K049 Hexavalent chromium, lead.

K050 Hexavalent chromium.

K051 Hexavalent chromium, lead.

K052 Lead.

K060 Cyanide, napthalene, phenolic compounds, arsenic.

K061 Hexavalent chromium, lead, cadmium.

K062 Hexavalent chromium, lead.

K064 Lead, cadmium.

K065 Do.

K066 Do.

K069 Hexavalent chromium, lead, cadmium.

K071 Mercury.

K073 Chloroform, carbon tetrachloride, hexachloroethane, trichloroethane, tetrachloroethylene, dichloroethylene, 1,1,2,2-tetrachloroethane. K083 Aniline, diphenylamine, nitrobenzene, phenylenediamine. K084 Arsenic.

K085 Benzene, dichlorobenzenes, trichlorobenzenes, tetrachlorobenzenes, pentachlorobenzene, hexachlorobenzene, benzyl chloride. K086 Lead, hexavalent chromium.

K087 Phenol, naphthalene.

K088 Cyanide (complexes).

K090 Chromium.

K091 Do.

K093 Phthalic anhydride, maleic anhydride.

K094 Phthalic anhydride.

92 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

K095 1,1,2-trichloroethane, 1,1,1,2-tetrachloroethane, 1,1,2,2-tetrachloroethane. K096 1,2-dichloroethane, 1,1,1-trichloroethane, 1,1,2-trichloroethane. K097 Chlordane, heptachlor.

K098 Toxaphene.

K099 2,4-dichlorophenol, 2,4,6-trichlorophenol.

K100 Hexavalent chromium, lead, cadmium.

K101 Arsenic.

K102 Arsenic.

K103 Aniline, nitrobenzene, phenylenediamine.

K104 Aniline, benzene, diphenylamine, nitrobenzene, phenylenediamine. K105 Benzene, monochlorobenzene, dichlorobenzenes, 2,4,6-trichlorophenol. K106 Mercury.

K107 1,1-Dimethylhydrazine (UDMH).

K108 1,1-Dimethylhydrazine (UDMH).

K109 1,1-Dimethylhydrazine (UDMH).

K110 1,1-Dimethylhydrazine (UDMH).

K111 2,4-Dinitrotoluene.

K112 2,4-Toluenediamine, o-toluidine, p-toluidine, aniline. K113 2,4-Toluenediamine, o-toluidine, p-toluidine, aniline. K114 2,4-Toluenediamine, o-toluidine, p-toluidine.

K115 2,4-Toluenediamine.

K116 Carbon tetrachloride, tetrachloroethylene, chloroform, phosgene. K117 Ethylene dibromide.

K118 Ethylene dibromide.

K123 Ethylene thiourea.

K124 Ethylene thiourea.

K125 Ethylene thiourea.

K126 Ethylene thiourea.

K131 Dimethyl sulfate, methyl bromide.

K132 Methyl bromide.

K136 Ethylene dibromide.

K141 Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene. K142 Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene. 93 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

K143 Benzene, benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene. K144 Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene.

K145 Benzene, benz(a)anthracene, benzo(a)pyrene, dibenz(a,h)anthracene, naphthalene. K147 Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene. K148 Benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene.

K149 Benzotrichloride, benzyl chloride, chloroform, chloromethane, chlorobenzene, 1,4- dichlorobenzene, hexachlorobenzene, pentachlorobenzene, 1,2,4,5- tetrachlorobenzene, toluene.

K150 Carbon tetrachloride, chloroform, chloromethane, 1,4-dichlorobenzene, hexachlorobenzene, pentachlorobenzene, 1,2,4,5-tetrachlorobenzene, 1,1,2,2- tetrachloroethane, tetrachloroethylene, 1,2,4-trichlorobenzene. K151 Benzene, carbon tetrachloride, chloroform, hexachlorobenzene, pentachlorobenzene, toluene, 1,2,4,5-tetrachlorobenzene, tetrachloroethylene. K156 Benomyl, carbaryl, carbendazim, carbofuran, carbosulfan, formaldehyde, methylene chloride, triethylamine.

K157 Carbon tetrachloride, formaldehyde, methyl chloride, methylene chloride, pyridine, triethylamine.

K158 Benomyl, carbendazim, carbofuran, carbosulfan, chloroform, methylene chloride. K159 Benzene, butylate, eptc, molinate, pebulate, vernolate. K161 Antimony, arsenic, metam-sodium, ziram.

K169 Benzene.

K170 Benzo(a)pyrene, dibenz(a,h)anthracene, benzo(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, 3-methylcholanthrene, 7,12-dimethylbenz(a)anthracene. K171 Benzene, arsenic.

K172 Benzene, arsenic.

K174 1,2,3,4,6,7,8-Heptachlorodibenzo-p-dioxin (1,2,3,4,6,7,8-HpCDD), 1,2,3,4,6,7,8- Heptachlorodibenzofuran (1,2,3,4,6,7,8-HpCDF), 1,2,3,4,7,8,9- Heptachlorodibenzofuran (1,2,3,6,7,8,9-HpCDF), HxCDDs (All Hexachlorodibenzo-p- dioxins), HxCDFs (All Hexachlorodibenzofurans), PeCDDs (All Pentachlorodibenzo- p-dioxins), OCDD (1,2,3,4,6,7,8,9-Octachlorodibenzo-p-dioxin), OCDF (1,2,3,4,6,7,8,9-Octachlorodibenzofuran), PeCDFs (All Pentachlorodibenzofurans), TCDDs (All Tetrachlorodibenzo- p-dioxins), TCDFs (All Tetrachlorodibenzofurans). K175 Mercury K176 Arsenic, Lead.

K177 Antimony.

K178 Thallium.

K181 Aniline, o-anisidine, 4-chloroaniline, p-cresidine, 2,4-dimethylaniline, 1,2- phenylenediamine, 1,3-phenylenediamine.

94 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division EPA hazardous Hazardous constituents for which listed waste No.

K901 0-isopropyl methylphosphonofluoridate (Sarin, GB), bis(2-chloroethyl)sulfide (Mustard, Mustard Agent, Mustard Gas, H, HD), bis(2-chloroethylthio)ethyl ether (Mustard T), Arsenic, Barium, Cadmium, Chromium, Lead, Mercury, Selenium, and Silver, 1,2 – Dichloroethane, 1,1 – Dichloroethylene, Lewisite, Tetrachloroethylene, Trichloroethylene, Vinyl Chloride.

K902 0-isopropyl methylphosphonofluoridate (Sarin, GB), bis(2-chloroethyl)sulfide (Mustard, Mustard Agent, Mustard Gas, H, HD), bis(2-chloroethylthio)ethyl ether (Mustard T), Arsenic, Barium, Cadmium, Chromium, Lead, Mercury, Selenium, and Silver, 1,2 – Dichloroethane, 1,1 – Dichloroethylene, Lewisite, Tetrachloroethylene, Trichloroethylene, Vinyl Chloride.

K903 Arsenic, Barium, Cadmium, Chromium, Lead, Mercury, Selenium, Silver, Chloroform, 1,2 – Dichloroethane, 1,1 – Dichloroethylene, Hexachloroethane, Tetrachloroethylene, Trichloroethylene, Vinyl Chloride. FOOTNOTE: N.A. -- Waste is hazardous because it fails the test for the characteristic of ignitability, corrosivity, or reactivity. 95 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Appendix VIII - Hazardous Constituents Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

A2213 Ethanimidothioic acid, 2- (dimethylamino) - 30558-43-1 U394 N-hydroxy-2-oxo-, methyl ester Acetonitrile Same 75-05-8 U003 Acetophenone Ethanone, 1-phenyl- 98-86-2 U004 2-Acetylaminefluarone Acetamide, N-9H-fluoren-2-yl- 53-96-3 U005 Acetyl chloride Same 75-36-5 U006 1-Acetyl-2-thiourea Acetamide, N-(aminothioxomethyl)- 591-08-2 P002 Acrolein 2-Propenal 107-02-8 P003 Acrylamide 2-Propenamide 79-06-1 U007 Acrylonitrile 2-Propenenitrile 107-13-1 U009 Aflatoxins Same 1402-68-2 Aldicarb Propanal, 2-methyl-2-(methylthio)-, O- 116-06-3 P070 [(methylamino)carbonyl]oxime Aldicarb Sulfone Propanal, 2-methyl-2- (methylsulfonyl) -, 1646-88-4 P203 O- [(methylamino) carbonyl] oxime Aldrin 1,4,5,8-Dimethanonaphthalene, 309-00-2 P004 1,2,3,4,10,10-10-hexachloro-1,4,4a,5,8,8a- hexahydro-, (1alpha,4alpha,4abeta,5alpha,8alpha, 8abeta)- Allyl alcohol 2-Propen-1-ol 107-18-6 P005 Allyl chloride 1-Propane, 3-chloro 107-05-1 Aluminum phosphide Same 20859-73-8 P006 4-Aminobiphenyl [1,1’-Biphenyl]-4-amine 92-67-1 5-(Aminomethyl)-3- 3(2H)-Isoxazolone, 5-(aminomethyl)- 2763-96-4 P007 isoxazolol 4-Aminopyridine 4-Pyridinamine 504-24-5 P008 Amitrole 1H-1,2,4-Triazol-3-amine 61-82-5 U011 Ammonium vanadate Vanadic acid, ammonium salt 7803-55-6 P119 Aniline Benzenamine 62-53-3 U012 o-Anisidine (2- Benzenamine, 2-Methoxy- 90-04-0 methoxyaniline)

Antimony Same 7440-36-0 Antimony compounds, N.O.S.1 Aramite Sulfurous acid, 2-chloroethyl 2-[4-(1,1- 140-57-8 dimethylethyl)phenoxy]-1-methylethyl ester Arsenic Same 7440-38-2 96 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Arsenic compounds, N.O.S.1 Arsenic acid Arsenic acid H3AsO4 7778-39-4 P010 Arsenic pentoxide Arsenic oxide As2O5 1303-28-2 P011 Arsenic trioxide Arsenic oxide As2O3 1327-53-3 P012 Auramine Benzenamine, 4,4’-carbonimidoylbis[N,N- 492-80-8 U014 dimethyl Azaserine L-Serine, diazoacetate (ester) 115-02-6 U015 Barban Carbamic acid, (3-chlorophenyl) -, 4- 101-27-9 U280 chloro-2- butynyl ester Barium Same 7440-39-3 Barium compounds, N.O.S.1 Barium cyanide Same 542-62-1 P013 Bendiocarb 1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl 22781-23-3 U278 carbamate Bendiocarb phenol 1,3-Benzodioxol-4-ol, 2,2-dimethyl- 22961-82-6 U364 Benomyl Carbamic acid, [1-[(butylamino) carbonyl]- 17804-35-2 U271 1H-benzimidazol-2-yl] -, methyl ester Benz[c]acridine Same 225-51-4 U016 Benz[a]anthracene Same 56-55-3 U018 Benzal chloride Benzene, (dichloromethyl)- 98-87-3 U017 Benzene Same 71-43-2 U019 Benzenearsonic acid Arsonic acid, phenyl- 98-05-5 Benzidine [1,1’-Biphenyl]-4,4-diamine 92-87-5 U021 Benzo[b]fluoranthene Benz[e]acephenanthrylene 205-99-2 Benzo[j]fluoranthene Same 205-82-3 Benzo(k)fluoranthene Same 207-08-9 Benzo[a]pyrene Same 50-32-8 U022 p-Benzoquinone 2,5-Cyclohexadiene-1,4-dione 106-51-4 U197 Benzotrichloride Benzene, (trichloromethyl)- 98-07-7 U023 Benzyl chloride Benzene, (chloromethyl)- 100-44-7 P028 Beryllium powder Same 7440-41-7 P015 Beryllium compounds, N.O.S.1 Bis (pentamethylene)- Piperidine, 1,1’-(tetrathiodicarbonothioyl)- 120-54-7 thiuram tetrasulfide bis- Bromoacetone 2-Propanone, 1-bromo- 598-31-2 P017 97 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Bromoform Methane, tribromo- 75-25-2 U225 4-Bromophenyl phenyl Benzene, 1-bromo-4-phenoxy- 101-55-3 U030 ether Brucine Strychnidin-10-one, 2,3-dimethoxy- 357-57-3 P018 Butylate Carbamothioic acid, bis (2-methylpropyl)- 2008-41-5 ,S-ethyl ester Butyl benzyl phthalate 1,2-Benzenedicarboxylic acid, butyl 85-68-7 phenylmethyl ester Cacodylic acid Arsinic acid, dimethyl- 75-60-5 U136 Cadmium Same 7440-43-9 Cadmium compounds, N.O.S.1 Calcium chromate Chromic acid H2CrO4, calcium salt 13765-19-0 U032 Calcium cyanide Calcium cyanide Ca(CN)2 592-01-8 P021 Carbaryl 1-Naphthalenol, methylcarbamate 63-25-2 U279 Carbendazim Carbamic acid, 1H-benzimidazol-2-yl, 10605-21-7 U372 methyl ester Carbofuran 7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, 1563-66-2 P127 methylcarbamate Carbofuran phenol 7-Benzofuranol, 2,3-dihydro-2,2-dimethyl- 1563-38-8 U367 Carbon disulfide Same 75-15-0 P022 Carbon oxyfluoride Carbonic difluoride 353-50-4 U033 Carbon tetrachloride Methane, tetrachloro- 56-23-5 U211 Carbosulfan Carbamic acid, [(dibutylamino) thio] 55285-14-8 P189 methyl-, 2,3-dihydro-2,2-dimethyl-7- benzofuranyl ester Chloral Acetaldehyde, trichloro- 75-87-6 U034 Chlorambucil Benzenebutanoic acid, 4-[bis(2- 305-03-3 U035 chloroethyl)amino]- Chlordane 4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8- 57-74-9 U036 octachloro-2,3,3a,4,7,7a-hexahydro- Chlordane (alpha and U036 gamma isomers)

Chlorinated benzenes, N.O.S.1 Chlorinated ethane, N.O.S.1 Chlorinated fluorocarbons, N.O.S.1 Chlorinated naphthalene, N.O.S.1 98 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Chlorinated phenol, N.O.S.1 Chlornaphazin Naphthalenamine, N,N’-bis(2-chloroethyl)- 494-03-1 U026 Chloroacetaldehyde Acetaldehyde, chloro- 107-20-0 P023 Chloroalkyl ethers, N.O.S.1 p-Chloroaniline Benzenamine, 4-chloro- 106-47-8 P024 Chlorobenzene Benzene, chloro- 108-90-7 U037 Chlorobenzilate Benzeneacetic acid, 4-chloro-alpha-(4- 510-15-6 U038 chlorophenyl)-alpha-hydroxy-, ethyl ester p-Chloro-m-cresol Phenol, 4-chloro-3-methyl- 59-50-7 U039 2-Chloroethyl vinyl ether Ethene, (2-chloroethoxy)- 110-75-8 U042 Chloroform Methane, trichloro- 67-66-3 U044 Chloromethyl methyl ether Methane, chloromethoxy- 107-30-2 U046 beta-Chloronaphthalene Naphthalene, 2-chloro- 91-58-7 U047 o-Chlorophenol Phenol, 2-chloro- 95-57-8 U048 1-(o-Chlorophenyl)thiourea Thiourea, (2-chlorophenyl)- 5344-82-1 P026 Chloroprene 1,3-Butadiene, 2-chloro- 126-99-8 3-Chloropropionitrile Propanenitrile, 3-chloro- 542-76-7 P027 Chromium Same 7440-47-3 Chromium compounds, N.O.S.1 Chrysene Same 218-01-9 U050 Citrus red No. 2 2-Naphthalenol, 1-[(2,5- 6358-53-8 dimethoxyphenyl)azo]- Coal tar creosote Same 8007-45-2 Copper cyanide Copper cyanide CuCN 544-92-3 P029 Copper Copper, bis(dimethylcarbamodithioato- 137-29-1 dimethyldithiocarbamate S,S’)

Creosote Same U051 p-Cresidine 2-Methoxy-5-methylbenzenamine 120-71-8 Cresol (Cresylic acid) Phenol, methyl- 1319-77-3 U052 Crotonaldehyde 2-Butenal 4170-30-3 U053 m-Cumenyl Phenol, 3-(methylethyl)-, methyl carbamate 64-00-6 P202 methylcarbamate Cyanides (soluble salts and P030 complexes) N.O.S.1 Cyanogen Ethanedinitrile 460-19-5 P031 Cyanogen bromide Cyanogen bromide (CN)Br 506-68-3 U246 99 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Cyanogen chloride Cyanogen chloride (CN)Cl 506-77-4 P033 Cycasin beta-D-Glucopyranoside, (methyl-ONN- 14901-08-7 azoxy)methyl Cycloate Carbamothioic acid, cyclohexylethyl-, S- 1134-23-2 ethyl ester 2-Cyclohexyl-4,6- Phenol, 2-cyclohexyl-4,6-dinitro- 131-89-5 P034 dinitrophenol Cyclophosphamide 2H-1,3,2-Oxazaphosphorin-2-amine, N,N- 50-18-0 U058 bis(2-chloroethyl)tetrahydro-, 2-oxide 2,4-D Acetic acid, (2,4-dichlorophenoxy)- 94-75-7 U240 2,4-D, salts, esters U240 Daunomycin 5,12-Naphthacenedione, 8-acetyl-10-[(3- 20830-81-3 U059 amino-2,3,6-trideoxy-alpha-L-lyxo- hexopyranosyl)oxy]-7,8,9,10-tetrahydro- 6,8,11-trihydroxy-1-methoxy-, (8S-cis)- Dazomet 2H-1,3,5-thiadiazine-2-thione, tetrahydro- 533-74-4 3,5-dimethyl DDD Benzene, 1,1’-(2,2- 72-54-8 U060 dichloroethylidene)bis[4-chloro- DDE Benzene, 1,1’-(dichloroethenylidene)bis[4- 72-55-9 chloro- DDT Benzene, 1,1’-(2,2,2- 50-29-3 U061 trichloroethylidene)bis[4-chloro- Diallate Carbamothioic acid, bis(1-methylethyl)-, S- 2303-16-4 U062 (2,3-dichloro-2-propenyl) ester Dibenz[a,h]acridine Same 226-36-8 Dibenz[a,j]acridine Same 224-42-0 Dibenz[a,h]anthracene Same 53-70-3 U063 7H-Dibenzo[c,g]carbazole Same 194-59-2 Dibenzo[a,e]pyrene Naphtho[1,2,3,4-def]chrysene 192-65-4 Dibenzo[a,h]pyrene Dibenzo[b,def]chrysene 189-64-0 Dibenzo[a,i]pyrene Benzo[rst]pentaphene 189-55-9 U064 1,2-Dibromo-3- Propane, 1,2-dibromo-3-chloro- 96-12-8 U066 chloropropane Dibutyl phthalate 1,2-Benzenedicarboxylic acid, dibutyl ester 84-74-2 U069 o-Dichlorobenzene Benzene, 1,2-dichloro- 95-50-1 U070 m-Dichlorobenzene Benzene, 1,3-dichloro- 541-73-1 U071 p-Dichlorobenzene Benzene, 1,4-dichloro- 106-46-7 U072 Dichlorobenzene, N.O.S.1 Benzene, dichloro- 25321-22-6 100 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

3,3’-Dichlorobenzidine [1,1’-Biphenyl]-4,4’-diamine, 3,3’-dichloro- 91-94-1 U073 1,4-Dichloro-2-butene 2-Butene, 1,4-dichloro- 764-41-0 U074 Dichlorodifluoromethane Methane, dichlorodifluoro- 75-71-8 U075 Dichloroethylene, N.O.S.1 Dichloroethylene 25323-30-2 1,1-Dichloroethylene Ethene, 1,1-dichloro- 75-35-4 U078 1,2-Dichloroethylene Ethene, 1,2-dichloro-, (E)- 156-60-5 U079 Dichloroethyl ether Ethane, 1,1’oxybis[2-chloro- 111-44-4 U025 Dichloroisopropyl ether Propane, 2,2’-oxybis[2-chloro- 108-60-1 U027 Dichloromethoxy ethane Ethane, 1,1’-[methylenebis(oxy)]bis[2- 111-91-1 U024 chloro- Dichloromethyl ether Methane, oxybis[chloro- 542-88-1 P016 2,4-Dichlorophenol Phenol, 2,4-dichloro- 120-83-2 U081 2,6-Dichlorophenol Phenol, 2,6-dichloro- 87-65-0 U082 Dichlorophenylarsine Arsonous dichloride, phenyl- 696-28-6 P036 Dichloropropane, N.O.S.1 Propane, dichloro- 26638-19-7 Dichloropropanol, N.O.S.1 Propanol, dichloro- 26545-73-3 Dichloropropene, N.O.S.1 1-Propene, dichloro- 26952-23-8 1,3-Dichloropropene 1-Propene, 1,3-dichloro- 542-75-6 U084 Dieldrin 2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 60-57-1 P037 3,4,5,6,9,9-hexachloro- 1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2aalpha,3beta,6beta, 6aalpha,7beta,7aalpha)- 1,2:3,4-Diepoxybutane 2,2’-Bioxirane 1464-53-5 U085 Diethylarsine Arsine, diethyl- 692-42-2 P038 Diethylene glycol, Ethanol, 2,2’-oxybis-, dicarbamate 5952-26-1 U395 dicarbamate 1,4-Diethyleneoxide 1,4-Dioxane 123-91-1 U108 Diethylhexyl phthalate 1,2-Benzenedicarboxylic acid, bis(2- 117-81-7 U028 ethylhexyl) ester N,N’-Diethylhydrazine Hydrazine, 1,2-diethyl- 1615-80-1 U086 O,O-Diethyl S-methyl Phosphorodithioic acid, O,O-diethyl S- 3288-58-2 U087 dithiophosphate methyl ester Diethyl-p-nitrophenyl Phosphoric acid, diethyl 4-nitrophenyl ester 311-45-5 P041 phosphate Diethyl phthalate 1,2-Benzenedicarboxylic acid, diethyl ester 84-66-2 U088 O,O-Diethyl O-pyrazinyl Phosphorothioic acid, O,O-diethyl O- 297-97-2 P040 phosphoro- thioate pyrazinyl ester 101 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Diethylstilbesterol Phenol, 4,4’-(1,2-diethyl-1,2-ethenediyl)bis- 56-53-1 U089 , (E)- Dihydrosafrole 1,3-Benzodioxole, 5-propyl- 94-58-6 U090 Diisopropylfluorophosphate Phosphorofluoridic acid, bis(1-methylethyl) 55-91-4 P043 (DFP) ester Dimethoate Phosphorodithioic acid, O,O-dimethyl S-[2- 60-51-5 P044 (methylamino)-2-oxoethyl] ester 3,3’-Dimethoxybenzidine [1,1’-Biphenyl]-4,4’-diamine, 3,3’- 119-90-4 U091 dimethoxy- p- Benzenamine, N,N-dimethyl-4- 60-11-7 U093 Dimethylaminoazobenzene (phenylazo)- 2,4-Dimethylaniline (2,4- Benzenamine, 2,4-dimethyl 95-68-1 xylidine)

7,12- Benz[a]anthracene, 7,12-dimethyl- 57-97-6 U094 Dimethylbenz[a]anthracene 3,3’-Dimethylbenzidine [1,1’-Biphenyl]-4,4’-diamine, 3,3’-dimethyl- 119-93-7 U095 Dimethylcarbamoyl chloride Carbamic chloride, dimethyl- 79-44-7 U097 1,1-Dimethylhydrazine Hydrazine, 1,1-dimethyl- 57-14-7 U098 1,2-Dimethylhydrazine Hydrazine, 1,2-dimethyl- 540-73-8 U099 alpha,alpha- Benzeneethanamine, alpha,alpha- 122-09-8 P046 Dimethylphenethylamine dimethyl- 2,4-Dimethylphenol Phenol, 2,4-dimethyl- 105-67-9 U101 Dimethyl phthalate 1,2-Benzenedicarboxylic acid, dimethyl 131-11-3 U102 ester Dimethyl sulfate Sulfuric acid, dimethyl ester 77-78-1 U103 Dimetilan Carbamic acid, dimethyl-, 1- 644-64-4 P191 [(dimethylamino) carbonyl]-5-methyl-1H- pyrazol-3yl ester Dinitrobenzene, N.O.S.1 Benzene, dinitro- 25154-54-5 4,6-Dinitro-o-cresol Phenol, 2-methyl-4,6-dinitro- 534-52-1 P047 4,6-Dinitro-o-cresol salts P047 2,4-Dinitrophenol Phenol, 2,4-dinitro- 51-28-5 P048 2,4-Dinitrotoluene Benzene, 1-methyl-2,4-dinitro- 121-14-2 U105 2,6-Dinitrotoluene Benzene, 2-methyl-1,3-dinitro- 606-20-2 U106 Dinoseb Phenol, 2-(1-methylpropyl)-4,6-dinitro- 88-85-7 P020 Di-n-octyl phthalate 1,2-Benzenedicarboxylic acid, dioctyl ester 117-84-0 U017 Diphenylamine Benzenamine, N-phenyl- 122-39-4 1,2-Diphenylhydrazine Hydrazine, 1,2-diphenyl- 122-66-7 U109 102 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Di-n-propylnitrosamine 1-Propanamine, N-nitroso-N-propyl- 621-64-7 U111 Disulfiram Thioperoxydicarbonic diamide, tetraethyl 97-77-8 Disulfoton Phosphorodithioic acid, O,O-diethyl S-[2- 298-04-4 P039 (ethylthio)ethyl] ester Dithiobiuret Thioimidodicarbonic diamide 541-53-7 P049 [(H2N)C(S)]2NH Endosulfan 6,9-Methano-2,4,3-benzodioxathiepin, 115-29-7 P050 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a- hexahydro-, 3-oxide Endothall 7-Oxabicyclo[2.2.1]heptane-2,3- 145-73-3 P088 dicarboxylic acid Endrin 2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 72-20-8 P051 3,4,5,6,9,9-hexachloro- 1a,2,2a,3,6,6a,7,7a-octahydro- ,(1aalpha,2beta,2abeta,3alpha,6alpha, 6abeta,7beta,7aalpha)- Endrin metabolites P051 Epichlorohydrin Oxirane, (chloromethyl)- 106-89-8 U041 Epinephrine 1,2-Benzenediol, 4-[1-hydroxy-2- 51-43-4 P042 (methylamino)ethyl]-, (R)- EPTC Carbamothioic acid, dipropyl-, S-ethyl ester 759-94-4 Ethyl carbamate (urethane) Carbamic acid, ethyl ester 51-79-6 U238 Ethyl cyanide Propanenitrile 107-12-0 P101 Ethylenebisdithiocarbamic Carbamodithioic acid, 1,2-ethanediylbis- 111-54-6 U114 acid Ethylenebisdithiocarbamic U114 acid, salts and esters Ethylene dibromide Ethane, 1,2-dibromo- 106-93-4 U067 Ethylene dichloride Ethane, 1,2-dichloro- 107-06-2 U077 Ethylene glycol monoethyl Ethanol, 2-ethoxy- 110-80-5 U359 ether Ethyleneimine Aziridine 151-56-4 P054 Ethylene oxide Oxirane 75-21-8 U115 Ethylenethiourea 2-Imidazolidinethione 96-45-7 U116 Ethylidene dichloride Ethane, 1,1-dichloro- 75-34-3 U076 Ethyl methacrylate 2-Propenoic acid, 2-methyl-, ethyl ester 97-63-2 U118 Ethyl methanesulfonate Methanesulfonic acid, ethyl ester 62-50-0 U119 Ethyl Ziram Zinc, bis(diethylcarbamodithioato-S,S’)- 14324-55-1 103 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Famphur Phosphorothioic acid, O-[4- 52-85-7 P097 [(dimethylamino)sulfonyl]phenyl] O,O- dimethyl ester Ferbam Iron, tris(dimethylcarbamodithioato-S,S’)- 14484-64-1 Fluoranthene Same 206-44-0 U120 Fluorine Same 7782-41-4 P056 Fluoroacetamide Acetamide, 2-fluoro- 640-19-7 P057 Fluoroacetic acid, sodium Acetic acid, fluoro-, sodium salt 62-74-8 P058 salt Formaldehyde Same 50-00-0 U122 Formetanate hydrochloride Methanimidamide, N,N-dimethyl-N’-[3- 23422-53-9 P198 [[(methylamino) carbonyl]oxy]phenyl]-, monohydrochloride Formic acid Same 64-18-6 U123 Formparanate Methanimidamide, N,N-dimethyl-N’-[2- 17702-57-7 P197 methyl-4-[[(methylamino)

carbonyl]oxy]phenyl]- Glycidylaldehyde Oxiranecarboxyaldehyde 765-34-4 U126 Halomethanes, N.O.S.1 Heptachlor 4,7-Methano-1H-indene, 1,4,5,6,7,8,8- 76-44-8 P059 heptachloro-3a,4,7,7a-tetrahydro- Heptachlor epoxide 2,5-Methano-2H-indeno[1,2-b]oxirene, 1024-57-3 2,3,4,5,6,7,7-heptachloro-1a,1b,5,5a,6,6a- hexa- hydro-, (1aalpha,1bbeta,2alpha,5alpha, 5abeta,6beta,6aalpha)- Heptachlor epoxide (alpha, beta, and gamma isomers)

Heptachlorodibenzofurans.

Heptachlorodibenzo-p- dioxins Hexachlorobenzene Benzene, hexachloro- 118-74-1 U127 Hexachlorobutadiene 1,3-Butadiene, 1,1,2,3,4,4-hexachloro- 87-68-3 U128 Hexachlorocyclopentadiene 1,3-Cyclopentadiene, 1,2,3,4,5,5- 77-47-4 U130 hexachloro- Hexachlorodibenzo-p- dioxins Hexachlorodibenzofurans Hexachloroethane Ethane, hexachloro- 67-72-1 U131 Hexachlorophene Phenol, 2,2’-methylenebis[3,4,6-trichloro- 70-30-4 U132 Hexachloropropene 1-Propene, 1,1,2,3,3,3-hexachloro- 1888-71-7 U243 104 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Hexaethyl tetraphosphate Tetraphosphoric acid, hexaethyl ester 757-58-4 P062 Hydrazine Same 302-01-2 U133 Hydrogen cyanide Hydrocyanic acid 74-90-8 P063 Hydrogen fluoride Hydrofluoric acid 7664-39-3 U134 Hydrogen sulfide Hydrogen sulfide H2S 7783-06-4 U135 Indeno[1,2,3-cd]pyrene Same 193-39-5 U137 3-Iodo-2-propynyl n- Carbamic acid, butyl-, 3-iodo-2-propynyl 55406-53-6 butylcarbamate ester Isobutyl alcohol 1-Propanol, 2-methyl- 78-83-1 U140 Isodrin 1,4,5,8-Dimethanonaphthalene, 465-73-6 P060 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a- hexahydro,(1alpha,4alpha,4abeta,5beta,8b eta,8-abeta) - Isolan Carbamic acid, dimethyl-, 3-methyl-1-(1- 119-38-0 P192 methylethyl)-1H-pyrazol-5-yl ester Isosafrole 1,3-Benzodioxole, 5-(1-propenyl)- 120-58-1 U141 Kepone 1,3,4-Metheno-2H-cyclobuta[cd]pentalen- 143-50-0 U142 2-one, 1,1a,3,3a,4,5,5,5a,5b,6- decachlorooctahydro- Lasiocarpine 2-Butenoic acid, 2-methyl-,7-[[2,3- 303-34-4 U143 dihydroxy-2-(1-methoxyethyl)-3-methyl-1 - oxobutoxy]methyl]-2,3,5,7a-tetrahydro-1H- pyrrolizin-1-yl ester, [1S- [1alpha(Z),7(2S*,3R*),7aalpha]]- Lead Same 7439-92-1 Lead compounds, N.O.S.1 Lead acetate Acetic acid, lead(2+) salt 301-04-2 U144 Lead phosphate Phosphoric acid, lead(2+) salt (2:3) 7446-27-7 U145 Lead subacetate Lead, bis(acetato-O)tetrahydroxytri- 1335-32-6 U146 Lewisite 1 (2-chloroethenyl) arsonous dichloride; 541-25-3 K901 & Chlorovinylarsine dichloride K902 Lewisite 2 2-Chlorovinyldichloroarsine; Bis (2- 40334-69-8 K901 & chlorovinyl) Chloroarsine K902 Lewisite 3 Arsine, tris(2-chloroethenyl); tir-(2- 40334-70-1 K901 & Cholorvinyl) arsine K902 Lindane Cyclohexane, 1,2,3,4,5,6-hexachloro-, 58-89-9 U129 (1alpha,2alpha,3beta,4alpha,5alpha,6beta)

- Maleic anhydride 2,5-Furandione 108-31-6 U147 Maleic hydrazide 3,6-Pyridazinedione, 1,2-dihydro- 123-33-1 U148 105 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Malononitrile Propanedinitrile 109-77-3 U149 Manganese Manganese, bis(dimethylcarbamodithioato- 15339-36-3 P196 dimethyldithiocarbamate S,S’)- Melphalan L-Phenylalanine, 4-[bis(2- 148-82-3 U150 chloroethyl)aminol]- Mercury Same 7439-97-6 U151 Mercury compounds, N.O.S.1 Mercury fulminate Fulminic acid, mercury(2+) salt 628-86-4 P065 Metam Sodium Carbamodithioic acid, methyl-, 137-42-8 monosodium salt Methacrylonitrile 2-Propenenitrile, 2-methyl- 126-98-7 U152 Methapyrilene 1,2-Ethanediamine, N,N-dimethyl-N’-2- 91-80-5 U155 pyridinyl-N’-(2-thienylmethyl)- Methiocarb Phenol, (3,5-dimethyl-4-(methylthio)-, 2032-65-7 P199 methylcarbamate Methomyl Ethanimidothioic acid, N- 16752-77-5 P066 [[(methylamino)carbonyl]oxy]-, methyl ester Methoxychlor Benzene, 1,1’-(2,2,2- 72-43-5 U247 trichloroethylidene)bis[4-methoxy- Methyl bromide Methane, bromo- 74-83-9 U029 Methyl chloride Methane, chloro- 74-87-3 U045 Methyl chlorocarbonate Carbonochloridic acid, methyl ester 79-22-1 U156 Methyl chloroform Ethane, 1,1,1-trichloro- 71-55-6 U226 3-Methylcholanthrene Benz[j]aceanthrylene, 1,2-dihydro-3- 56-49-5 U157 methyl- 4,4’-Methylenebis (2- Benzenamine, 4,4’-methylenebis[2-chloro- 101-14-4 U158 chloroaniline)

Methylene bromide Methane, dibromo- 74-95-3 U068 Methylene chloride Methane, dichloro- 75-09-2 U080 Methyl ethyl ketone (MEK) 2-Butanone 78-93-3 U159 Methyl ethyl ketone 2-Butanone, peroxide 1338-23-4 U160 peroxide Methyl hydrazine Hydrazine, methyl- 60-34-4 P068 Methyl iodide Methane, iodo- 74-88-4 U138 Methyl isocyanate Methane, isocyanato- 624-83-9 P064 2-Methyllactonitrile Propanenitrile, 2-hydroxy-2-methyl- 75-86-5 P069 Methyl methacrylate 2-Propenoic acid, 2-methyl-, methyl ester 80-62-6 U162 Methyl methanesulfonate Methanesulfonic acid, methyl ester 66-27-3 106 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Methyl parathion Phosphorothioic acid, O,O-dimethyl O-(4- 298-00-0 P071 nitrophenyl) ester Methylthiouracil 4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl- 56-04-2 U164 2-thioxo- Metolcarb Carbamic acid, methyl-, 3-methylphenyl 1129-41-5 P190 ester Mexacarbate Phenol, 4-(dimethylamino)-3,5-dimethyl-, 315-18-4 P128 methylcarbamate (ester)

Mitomycin C Azirino[2’,3’:3,4]pyrrolo[1,2-a]indole-4,7- 50-07-7 U010 dione, 6-amino-8- [[(aminocarbonyl)oxy]methyl]- 1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5- methyl-, [1aS- (1aalpha,8beta,8aalpha,8balpha)]-.

MNNG Guanidine, N-methyl-N’-nitro-N-nitroso- 70-25-7 U163 Molinate 1H-Azepine-1-carbothioic acid, hexahydro- 2212-67-1 , S-ethyl ester Mustard gas Ethane, 1,1’-thiobis[2-chloro- 505-60-2 P909 Mustard T Bis(2-chloroethylthioethyl) ether 63918-89-8 P910 Naphthalene Same 91-20-3 U165 1,4-Naphthoquinone 1,4-Naphthalenedione 130-15-4 U166 alpha-Naphthylamine 1-Naphthalenamine 134-32-7 U167 beta-Naphthylamine 2-Naphthalenamine 91-59-8 U168 alpha-Naphthylthiourea Thiourea, 1-naphthalenyl- 86-88-4 P072 Nickel Same 7440-02-0 Nickel compounds, N.O.S.1 Nickel carbonyl Nickel carbonyl Ni(CO)4, (T-4)- 13463-39-3 P073 Nickel cyanide Nickel cyanide Ni(CN)2 557-19-7 P074 Nicotine Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)- 54-11-5 P075 Nicotine salts P075 Nitric oxide Nitrogen oxide NO 10102-43-9 P076 p-Nitroaniline Benzenamine, 4-nitro- 100-01-6 P077 Nitrobenzene Benzene, nitro- 98-95-3 U169 Nitrogen dioxide Nitrogen oxide NO2 10102-44-0 P078 Nitrogen mustard Ethanamine, 2-chloro-N-(2-chloroethyl)-N- 51-75-2 methyl- Nitrogen mustard, hydro- chloride salt Nitrogen mustard N-oxide Ethanamine, 2-chloro-N-(2-chloroethyl)-N- 126-85-2 methyl-, N-oxide 107 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Nitrogen mustard, N-oxide, hydrochloride salt Nitroglycerin 1,2,3-Propanetriol, trinitrate 55-63-0 P081 p-Nitrophenol Phenol, 4-nitro- 100-02-7 U170 2-Nitropropane Propane, 2-nitro- 79-46-9 U171 Nitrosamines, N.O.S.1 35576-91-1 N-Nitrosodi-n-butylamine 1-Butanamine, N-butyl-N-nitroso- 924-16-3 U172 N-Nitrosodiethanolamine Ethanol, 2,2’-(nitrosoimino)bis- 1116-54-7 U173 N-Nitrosodiethylamine Ethanamine, N-ethyl-N-nitroso- 55-18-5 U174 N-Nitrosodimethylamine Methanamine, N-methyl-N-nitroso- 62-75-9 P082 N-Nitroso-N-ethylurea Urea, N-ethyl-N-nitroso- 759-73-9 U176 N-Nitrosomethylethylamine Ethanamine, N-methyl-N-nitroso- 10595-95-6 N-Nitroso-N-methylurea Urea, N-methyl-N-nitroso- 684-93-5 U177 N-Nitroso-N-methylurethane Carbamic acid, methylnitroso-, ethyl ester 615-53-2 U178 N-Nitrosomethylvinylamine Vinylamine, N-methyl-N-nitroso- 4549-40-0 P084 N-Nitrosomorpholine Morpholine, 4-nitroso- 59-89-2 N-Nitrosonornicotine Pyridine, 3-(1-nitroso-2-pyrrolidinyl)-, (S)- 16543-55-8 N-Nitrosopiperidine Piperidine, 1-nitroso- 100-75-4 U179 N-Nitrosopyrrolidine Pyrrolidine, 1-nitroso- 930-55-2 U180 N-Nitrososarcosine Glycine, N-methyl-N-nitroso- 13256-22-9 5-Nitro-o-toluidine Benzenamine, 2-methyl-5-nitro- 99-55-8 U181 Octachlorodibenzo-p-dioxin 1,2,3,4,6,7,8,9-Octachlorodibenzo-p-dioxin 3268-87-9 K174 (OCDD)

Octachlorodibenzofuran 1,2,3,4,6,7,8,9-Octachlorodibenzofuran 39001-02-0 K174 (OCDF)

Octamethylpyrophos- Diphosphoramide, octamethyl- 152-16-9 P085 phoramide Osmium tetroxide Osmium oxide OsO4, (T-4)- 20816-12-0 P087 Oxamyl Ethanimidothioc acid, 2-(dimethylamino)- 23135-22-0 P194 N-[[(methylamino)carbonyl]oxy]-2- oxo- ,methyl ester Paraldehyde 1,3,5-Trioxane, 2,4,6-trimethyl- 123-63-7 U182 Parathion Phosphorothioic acid, O,O-diethyl O-(4- 56-38-2 P089 nitrophenyl) ester Pebulate Carbamothioic acid, butylethyl-, S-propyl 1114-71-2 ester Pentachlorobenzene Benzene, pentachloro- 608-93-5 U183 108 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Pentachlorodibenzo-p- dioxins Pentachlorodibenzofurans Pentachloroethane Ethane, pentachloro- 76-01-7 U184 Pentachloronitrobenzene Benzene, pentachloronitro- 82-68-8 U185 (PCNB)

Pentachlorophenol Phenol, pentachloro- 87-86-5 See F0276 Perfluorooctanoate 45285-51-6 Perfluorooctanoic acid pentadecafluorooctanoic acid 335-67-1 (PFOA)

Perfluorooctane sulfonate 45298-90-6 Perfluorooctane sulfonic heptadecafluorooctane sulfonic acid 1763-23-1 acid (PFOS)

Phenacetin Acetamide, N-(4-ethoxyphenyl)- 62-44-2 U187 Phenol Same 108-95-2 U188 Phenylenediamine Benzenediamine 25265-76-3 1,2-Phenylenediamine 1,2-Benzenediamine 95-54-5 1,3-Phenylenediamine 1,3-Benzenediamine 108-45-2 Phenylmercury acetate Mercury, (acetato-O)phenyl- 62-38-4 P092 Phenylthiourea Thiourea, phenyl- 103-85-5 P093 Phosgene Carbonic dichloride 75-44-5 P095 Phosphine Same 7803-51-2 P096 Phorate Phosphorodithioic acid, O,O-diethyl S- 298-02-2 P094 [(ethylthio)methyl] ester Phthalic acid esters, N.O.S.1 Phthalic anhydride 1,3-Isobenzofurandione 85-44-9 U190 Physostigmine Pyrrolo[2,3-b]indol-5-01, 1,2,3,3a,8,8a- 57-47-6 P204 hexahydro-1,3a,8-trimethyl- ,methylcarbamate (ester), (3aS-cis)- Physostigmine salicylate Benzoic acid, 2-hydroxy-, compd. with 57-64-7 P188 (3aS-cis) -1,2,3,3a,8,8a-hexahydro-1,3a,8- trimethylpyrrolo [2,3-b]indol-5-yl methylcarbamate ester (1:1)

2-Picoline Pyridine, 2-methyl- 109-06-8 U191 Polychlorinated biphenyls, N.O.S.1 Potassium cyanide Potassium cyanide K(CN) 151-50-8 P098 Potassium Carbamodithioic acid, dimethyl, potassium 128-03-0 dimethyldithiocarbamate salt 109 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Potassium n- Carbamodithioic acid, 51026-28-9 hydroxymethyl-n-methyl- (hydroxymethyl)methyl-, monopotassium dithiocarbamate salt Potassium n- Carbamodithioic acid, methyl- 137-41-7 methyldithiocarbamate monopotassium salt Potassium Pentachlorophenol, potassium salt 7778736 None pentachlorophenate Potassium silver cyanide Argentate(1-), bis(cyano-C)-, potassium 506-61-6 P099 Promecarb Phenol, 3-methyl-5-(1-methylethyl)-, 2631-37-0 P201 methyl carbamate Pronamide Benzamide, 3,5-dichloro-N-(1,1-dimethyl- 23950-58-5 U192 2-propynyl)- 1,3-Propane sultone 1,2-Oxathiolane, 2,2-dioxide 1120-71-4 U193 Propham Carbamic acid, phenyl-, 1-methylethyl 122-42-9 U373 ester Propoxur Phenol, 2-(1-methylethoxy)-, 114-26-1 U411 methylcarbamate n-Propylamine 1-Propanamine 107-10-8 U194 Propargyl alcohol 2-Propyn-1-ol 107-19-7 P102 Propylene dichloride Propane, 1,2-dichloro- 78-87-5 U083 1,2-Propylenimine Aziridine, 2-methyl- 75-55-8 P067 Propylthiouracil 4(1H)-Pyrimidinone, 2,3-dihydro-6-propyl- 51-52-5 2-thioxo- Prosulfocarb Carbamothioic acid, dipropyl-, S- 52888-80-9 U387 (phenylmethyl)ester Pyridine Same 110-86-1 U196 Reserpine Yohimban-16-carboxylic acid, 11,17- 50-55-5 U200 dimethoxy-18-[(3,4,5- trimethoxybenzoyl)oxy]-smethyl ester, (3beta,16beta,17alpha,18beta,20alpha)- Resorcinol 1,3-Benzenediol 108-46-3 U201 Saccharin 1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide 81-07-2 U202 Saccharin salts U202 Safrole 1,3-Benzodioxole, 5-(2-propenyl)- 94-59-7 U203 Sarin, GB Isopropyl methylphosphonofluoridate 107-44-8 P911 Selenium Same 7782-49-2 Selenium compounds, N.O.S.1 Selenium dioxide Selenious acid 7783-00-8 U204 Selenium sulfide Selenium sulfide SeS2 7488-56-4 U205 110 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Selenium, tetrakis Carbamodithioic acid, dimethyl-, 144-34-3 (dimethyldithiocarbamate) tetraanhydrosulfide with orthothioselenious acid Selenourea Same 630-10-4 P103 Silver Same 7440-22-4 Silver compounds, N.O.S.1 Silver cyanide Silver cyanide Ag(CN) 506-64-9 P104 Silvex (2,4,5-TP) Propanoic acid, 2-(2,4,5-trichlorophenoxy)- 93-72-1 See F027 Sodium cyanide Sodium cyanide Na(CN) 143-33-9 P106 Sodium Carbamodithioic acid, dibutyl, sodium salt 136-30-1 dibutyldithiocarbamate Sodium Carbamodithioic acid, diethyl-, sodium salt 148-18-5 diethyldithiocarbamate Sodium Carbamodithioic acid, dimethyl-, sodium 128-04-1 dimethyldithiocarbamate salt Sodium pentachlorophenate Pentachlorophenol, sodium salt 131522 None Streptozotocin D-Glucose, 2-deoxy-2- 18883-66-4 U206 [[(methylnitrosoamino)carbonyl]amino]- Strychnine Strychnidin-10-one 57-24-9 P108 Strychnine salts P108 Sulfallate Carbamodithioic acid, diethyl-, 2-chloro-2- 95-06-7 propenyl ester TCDD Dibenzo[b,e][1,4]dioxin, 2,3,7,8- 1746-01-6 tetrachloro- Tetrabutylthiuram disulfide Thioperoxydicarbonic diamide, tetrabutyl 1634-02-2 1,2,4,5-Tetrachlorobenzene Benzene, 1,2,4,5-tetrachloro- 95-94-3 U207 Tetrachlorodibenzo-p- dioxins Tetrachlorodibenzofurans Tetrachloroethane, N.O.S.1 Ethane, tetrachloro-, N.O.S. 25322-20-7 1,1,1,2-Tetrachloroethane Ethane, 1,1,1,2-tetrachloro- 630-20-6 U208 1,1,2,2-Tetrachloroethane Ethane, 1,1,2,2-tetrachloro- 79-34-5 U209 Tetrachloroethylene Ethene, tetrachloro- 127-18-4 U210 2,3,4,6-Tetrachlorophenol Phenol, 2,3,4,6-tetrachloro- 58-90-2 See F027 2,3,4,6-Tetrachlorophenol, same 53535276 None potassium salt 2,3,4,6-Tetrachlorophenol, same 25567559 None sodium salt 111 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Tetramethylthiuram Bis(dimethylthiocarbamoyl) sulfide 97-74-5 monosulfide Tetraethyldithiopyrophos- Thiodiphosphoric acid, tetraethyl ester 3689-24-5 P109 phate Tetraethyl lead Plumbane, tetraethyl- 78-00-2 P110 Tetraethyl pyrophosphate Diphosphoric acid, tetraethyl ester 107-49-3 P111 Tetranitromethane Methane, tetranitro- 509-14-8 P112 Thallium Same 7440-28-0 Thallium compounds, N.O.S.1 Thallic oxide Thallium oxide Tl2O3 1314-32-5 P113 Thallium(I) acetate Acetic acid, thallium(1+) salt 563-68-8 U214 Thallium(I) carbonate Carbonic acid, dithallium(1+) salt 6533-73-9 U215 Thallium(I) chloride Thallium chloride TlCl 7791-12-0 U216 Thallium(I) nitrate Nitric acid, thallium(1+) salt 10102-45-1 U217 Thallium selenite Selenious acid, dithallium(1+) salt 12039-52-0 P114 Thallium(I) sulfate Sulfuric acid, dithallium(1+) salt 7446-18-6 P115 Thioacetamide Ethanethioamide 62-55-5 U218 Thiodicarb Ethanimidothioic acid, N,N’-(thiobis 59669-26-0 U410 [(methylimino) carbonyloxy]] bis-, dimethyl ester Thiofanox 2-Butanone, 3,3-dimethyl-1-(methylthio)-, 39196-18-4 P045 0-[(methylamino)carbonyl] oxime Thiomethanol Methanethiol 74-93-1 U153 Thiophanate-methyl Carbamic acid, [1,2-phyenylenebis 23564-05-8 U409 (iminocarbonothioyl)] bis-, dimethyl ester Thiophenol Benzenethiol 108-98-5 P014 Thiosemicarbazide Hydrazinecarbothioamide 79-19-6 P116 Thiourea Same 62-56-6 U219 Thiram Thioperoxydicarbonic diamide 137-26-8 U244 [(H2N)C(S)]2S2, tetramethyl- Tirpate 1,3-Dithiolane-2-carboxaldehyde, 2,4- 26419-73-8 P185 dimethyl-, O-[(methylamino) carbonyl] oxime Toluene Benzene, methyl- 108-88-3 U220 Toluenediamine Benzenediamine, ar-methyl- 25376-45-8 U221 Toluene-2,4-diamine 1,3-Benzenediamine, 4-methyl- 95-80-7 Toluene-2,6-diamine 1,3-Benzenediamine, 2-methyl- 823-40-5 Toluene-3,4-diamine 1,2-Benzenediamine, 4-methyl- 496-72-0 112 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Toluene diisocyanate Benzene, 1,3-diisocyanatomethyl- 26471-62-5 U223 o-Toluidine Benzenamine, 2-methyl- 95-53-4 U328 o-Toluidine hydrochloride Benzenamine, 2-methyl-, hydrochloride 636-21-5 U222 p-Toluidine Benzenamine, 4-methyl- 106-49-0 U353 Toxaphene Same 8001-35-2 P123 Triallate Carbamothioic acid, bis(1-methylethyl)-, S- 2303-17-5 U389 (2,3,3-trichloro-2-propenyl) ester 1,2,4-Trichlorobenzene Benzene, 1,2,4-trichloro- 120-82-1 1,1,2-Trichloroethane Ethane, 1,1,2-trichloro- 79-00-5 U227 Trichloroethylene Ethene, trichloro- 79-01-6 U228 Trichloromethanethiol Methanethiol, trichloro- 75-70-7 P118 Trichloromonofluoromethan Methane, trichlorofluoro- 75-69-4 U121 e 2,4,5-Trichlorophenol Phenol, 2,4,5-trichloro- 95-95-4 See F027 2,4,6-Trichlorophenol Phenol, 2,4,6-trichloro- 88-06-2 See F027 2,4,5-T Acetic acid, (2,4,5-trichlorophenoxy)- 93-76-5 See F027 Trichloropropane, N.O.S.1 25735-29-9 1,2,3-Trichloropropane Propane, 1,2,3-trichloro- 96-18-4 Triethylamine Ethanamine, N,N-diethyl- 121-44-8 U404 O,O,O-Triethyl Phosphorothioic acid, O,O,O-triethyl ester 126-68-1 phosphorothioate 1,3,5-Trinitrobenzene Benzene, 1,3,5-trinitro- 99-35-4 U234 Tris(1-aziridinyl)phosphine Aziridine, 1,1’,1”-phosphinothioylidynetris- 52-24-4 sulfide Tris(2,3-dibromopropyl) 1-Propanol, 2,3-dibromo-, phosphate (3:1) 126-72-7 U235 phosphate Trypan blue 2,7-Naphthalenedisulfonic acid, 3,3’-[(3,3’- 72-57-1 U236 dimethyl[1,1’-biphenyl]-4,4’diyl)bis(azo)]- bis[5-amino-4-hydroxy-, tetrasodium salt.

Uracil mustard 2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2- 66-75-1 U237 chloroethyl)amino]- Vanadium pentoxide Vanadium oxide V2O5 1314-62-1 P120 Vernolate Carbamothioic acid, dipropyl-, S-propyl 1929-77-7 ester Vinyl chloride Ethene, chloro- 75-01-4 U043 Warfarin 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3- 81-81-2 U248 oxo-1-phenylbutyl)-, when present at concentrations less than 0.3% 113 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Chemical Hazardous Common name Chemical abstracts name abstracts No. waste No.

Warfarin 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3- 81-81-2 P001 oxo-1-phenylbutyl)-, when present at concentrations greater than 0.3% Warfarin salts, when U248 present at concentrations less than 0.3% Warfarin salts, when P001 present at concentrations greater than 0.3% Zinc cyanide Zinc cyanide Zn(CN)2 557-21-1 P121 Zinc phosphide Zinc phosphide Zn3P2, when present at 1314-84-7 P122 concentrations greater than 10% Zinc phosphide Zinc phosphide Zn3P2, when present at 1314-84-7 U249 concentrations of 10% or less Ziram Zinc, bis(dimethylcarbamodithioato-S,S’)-, 137-30-4 P205 (T-4)- FOOTNOTE: 1The abbreviation N.O.S. (not otherwise specified) signifies those members of the general class not specifically listed by name in this appendix.

114 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Part 261, Appendix IX - Wastes Excluded Under §§ 260.20 and 260.22 DELISTING #: 001 FACILITY: South Adams County Water and Sanitation District (“SACWSD”) ADDRESS: 7400 Quebec Street, Commerce City WASTE: Spent granular activated carbon (“GAC”) contaminated with spent halogenated solvents, EPA hazardous waste # F002, generated after January 15, 1992. CONDITIONS: This delisting is valid only for the above specified wastestream under the following conditions:

a) The waste may not be land disposed. This restriction specifically includes, but is not limited to, the following forms of land disposal:

i) Storage in lieu of land disposal. The waste may not be stored for greater than one year unless the petitioner can prove that such storage is necessary to facilitate proper treatment of the waste as specified by the conditions of the delisting. ii) Placement of the waste on or in the land as defined in 6 CCR 1007-3, § 268.2. b) The waste must be regenerated at an incinerator in compliance with Sections 3004 and 3005 of the federal Solid Waste Disposal Act, 42 U.S.C. Sections 6924 and 6925; and Section 121(d)(3) of the federal Comprehensive Environmental Response Compensation and Liability Act, 42 U.S.C. Section 9621(d)(3).

c) The unit which regenerates the waste must meet the limits on the parameters below for each batch of SACWSD’s waste:

i) Regeneration facility must be able to demonstrate that at least 99.99% destruction removal efficiency is achieved for the following compounds: chloroform 1,1 dichloroethane (1,1 DCA)

1,1 dichloroethene (1,1 DCE)

t-1, 2 dichloroethene (t-1,2 DCE)

1,1 dichloropropane tetrachloroethene (perchloroethylene or PCE)

1,1,1 trichloroethane (1,1,1 TCA)

trichloroethene(TCE)

ii) An afterburner combustion temperature that can be shown to achieve the required 99.99% destruction removal efficiency must be maintained. The afterburner combustion temperature shall not be less than 1,700 degrees F.

iii) The regeneration facility must remain in compliance with all applicable local, state, and federal environmental regulations.

d) SACWSD is required to obtain documentation which clearly shows that each batch of spent carbon was regenerated under the required conditions. Records must be kept on site at the Klein plant for a minimum of three years.

115 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division e) SACSWD must notify the Hazardous Materials and Waste Management Division, Hazardous Waste Control Section on a quarterly basis, of SACWSD’s knowledge of significant changes in the type or concentration of hazardous constituents in the carbon or in the influent to SACWSD’s GAC system. “Significant changes” are defined as increases in the total concentration of any of the following constituents (in the carbon or the influent) which exceed the values given in the October 1990 petition by 50% or greater:

chloroform 1,1 dichloroethane (1,1 DCA)

1,1 dichloroethene (1,1 DCE)

trans-1,2 dichloroethene (t-1,2 DCE)

1,1 dichloropropane tetrachloroethene (perchloroethylene or PCE)

1,1,1 trichloroethane (1,1,1 TCA)

trichloroethene (TCE)

“Significant changes” also refers to the appearance of any additional Part 264, Appendix IX hazardous constituents (in either the carbon or the influent) not represented in SACWSD’s October 1990 delisting petition.

f) The Department reserves the right to re-evaluate and, if necessary, revoke this delisting or modify its conditions in the event of any “significant changes” (as defined above) in the carbon or in the influent to SACWSD’s GAC system.

116 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 002 FACILITY: NTI, A Division of Colorado Springs Circuits, Inc. (“NTI”) ADDRESS: 6035 Galley Road, Colorado Springs, 80915 WASTE: Wastewater Treatment Sludge from Electroplating Operations EPA hazardous waste # F006, generated after August 20, 1996.

The Solid and Hazardous Waste Commission is hereby removing the conditional delisting granted to NTI, a division of Colorado Springs Circuits, Inc. (“NTI”), for its facility located at 6035 Galley Road in Colorado Springs, Colorado (the “Facility”).

NTI was granted a conditional delisting by the Commission on August 20, 1996 for wastewater treatment sludge (F006 hazardous waste) generated from electroplating operations at the Facility. The delisting was granted under conditions that specified sampling, storage, recordkeeping and disposal requirements for the delisted sludge. The conditional delisting of the F006 waste also prohibited any major changes to the electroplating process or wastewater treatment process at the Facility without prior notification, evaluation, and approval by the Division. In January of 2000, Dynamic Details, Inc. (“DDI”), formally known as NTI, announced its plans to consolidate its pre-production manufacturing operations located at the Facility into its Dallas, Texas operation, which would result in the complete closure of the Colorado Springs facility. On June 20, 2000, the Division received formal notice indicating that DDI had officially ceased Operations at the Facility on December 31, 1999, and had completed all closure activities at the Facility as of May 18, 2000. Therefore, NTI’s August 1996 conditional delisting is no longer applicable, and the Commission is removing the delisting.

117 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Note: Conditional delisting #003 regarding the Denver Arapahoe Chemical Waste Processing Facility (“DACWPF”) was revoked by the Solid and Hazardous Waste Commission at its August 16, 2022 Commission hearing. Please see the August 16, 2022 Statement of Basis and Purpose in Section 8.100 of these regulations for further information concerning this rulemaking.

DELISTING #: 004 FACILITY: AAA Plating, Inc.

ADDRESS: 7777 40th Avenue, Denver, CO 80205 WASTE: Wastewater Treatment Sludge from Electroplating and Chemical Conversion Coating Operations. EPA Hazardous Waste Codes F006 and F019 generated after June 20, 2000. CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on January 5, 2000 under the following conditions: a. Changes to Current Operations 1. AAA Plating must notify the Division at least 30-days prior to implementing any major change to the electroplating or chemical conversion coating processes. A major change is any change including alteration of the current wastewater treatment process or incorporating different hazardous chemicals or reagents such that the composition of the wastewater treatment sludge is altered.

2. AAA Plating must notify the Hazardous Waste Compliance Unit of the Hazardous Materials and Waste Management Division within 15 days after implementing any change to the wastewater treatment, electroplating, or chemical conversion coating processes that cause a significant change in the type or concentration of any hazardous constituent in the waste. A significant change is defined as an increase in the total waste concentration for any constituent identified below:

Constituent Total Concentration (ppm)

Arsenic 0.58 Barium 10.87 Cadmium 8.53 Chromium (Hexavalent) Detection Lead 16.88 Mercury Detection Nickel 3083 Selenium Detection Silver 30.1 Significant change also includes the detection of any additional Part 264, Appendix IX hazardous constituents that are not identified above.

3. The Division reserves the right to re-evaluate and, if necessary, revoke this approval or modify these conditions in the event that a significant change, as defined above, is reported by AAA Plating. In such case, the Division may revoke or impose temporary requirements on the petitioned waste until such time as the petition can be re-evaluated. 118 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division b. Storage Requirements 1. The delisted waste generated by AAA Plating may not be accumulated on-site for a period in excess of one year.

2. The volume of delisted waste accumulated on-site may not exceed 40 cubic yards or 28 tons at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” and with an accumulation start date. The container must be kept closed except for when waste is being added to or removed from the container.

c. Recordkeeping Requirements 1. AAA Plating shall maintain records of the disposal or recycling of all delisted waste that documents that such activities are in accordance with the delisting petition. 2. AAA Plating shall maintain all records required by number one above for a period of at least three years.

d. Disposal Requirements 1. The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2) or recycled at an appropriate metal reclamation facility.

119 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 005 FACILITY: Wright and McGill Company ADDRESS: 4245 East 46th Avenue, Denver, Colorado 80216 WASTE: Wastewater Treatment Sludge from Chemical Etching Operations. EPA Hazardous Waste Code F006 generated after November 20, 2001.

CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on June 25, 2001 under the following conditions: a. Changes to Current Operation 1. The Wright and McGill Company must notify the Department at least 30-days prior to implementing any major change to the chemical etching (i.e., the lazer sharpening) process. A major change is any change including alteration of the current wastewater treatment process or incorporating different hazardous chemicals or reagents such that the composition of the lazer sludge is altered.

2. The Wright and McGill Company must notify the Hazardous Waste Compliance Unit of the Hazardous Materials and Waste Management Division within 15 days after implementing any change to the wastewater treatment or chemical etching process that causes a significant change in the type or concentration of any hazardous constituent in the waste. A significant change is defined as an increase in the total waste concentration for any constituent identified below:

Constituent Total Concentration (ppm)

Arsenic Detection Barium 7.96 Cadmium 0.23 Chromium (Hexavalent) Detection Lead 16.53 Mercury Detection Nickel 244.25 Selenium Detection Silver Detection A significant change also includes the detection of any additional Part 264, Appendix VIII hazardous constituents that are not identified above.

3. The Department reserves the right to re-evaluate and, if necessary, revoke this approval or modify the conditions in the event that a significant change, as defined above, is reported by the Wright and McGill Company. In such case, the Department may revoke or impose temporary requirements on the petitioned waste until such time as the petition can be re-evaluated.

b. Storage Requirements 1. The delisted waste generated by the Wright and McGill Company may not be accumulated on-site for a period in excess of one year. 2. The volume of delisted waste accumulated on-site may not exceed 40 cubic yards or 28 tons at any given time.

120 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” with an accumulation start date, and the container must be kept closed except for when waste is being added to or removed from the container.

c. Recordkeeping Requirements 1. The Wright and McGill Company shall maintain records documenting that the delisted waste is managed in accordance with the delisting petition. 2. The Wright and McGill Company shall maintain all records required by number one above for a period of at least three years.

d. Disposal Requirements 1. The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2).

121 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING#: 006 FACILITY: Photo Stencil, LLC ADDRESS: 4725 Centennial BoulevardColorado Springs, Colorado 80919 WASTE: Wastewater Treatment Sludge from Electroplating and Chemical Etching Operations. EPA Hazardous Waste Code F006 generated after June 17, 2003. CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on April 16, 2003 under the following conditions: a. Changes to Current Operation 1. Photo Stencil must notify the Department at least 30-days prior to implementing any major change to the electroplating and/or chemical etching processes. A major change is any change including alteration of the current wastewater treatment process or incorporating different hazardous chemicals or reagents such that the composition of the wastewater treatment sludge is altered.

2. Photo Stencil must notify the Hazardous Waste Compliance Unit of the Hazardous Materials and Waste Management Division within 15 days after implementing any change to the wastewater treatment, electroplating, or chemical etching process that causes a significant change in the type or concentration of any hazardous constituent in the waste. A significant change is defined as an increase in the total waste concentration for any constituent identified below:

Constituent Total Concentration (ppm)

Arsenic 0.54 Barium 4.6 Cadmium Detection Chromium (Hexavalent) Detection Chromium-total 308.5 Copper 4,715 Lead 10.6 Mercury Detection Nickel 13,183 Selenium Detection Silver Detection Complexed Cyanide Detection A significant change also includes the detection of any additional Part 261, Appendix VIII hazardous constituents that are not identified above.

3. The Department reserves the right to re-evaluate and, if necessary, revoke this approval or modify the conditions in the event that a significant change, as defined above, is reported by Photo Stencil. In such case, the Department may revoke or impose temporary requirements on the petitioned waste until such time as the petition can be re- evaluated.

b. Storage Requirements 1. The delisted waste generated by Photo Stencil may not be accumulated on-site for a period in excess of one year.

122 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 2. The volume of delisted waste accumulated on-site may not exceed 40 cubic yards or 28 tons at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” with an accumulation start date, and the container must be kept closed except for when waste is being added to or removed from the container.

c. Recordkeeping Requirements 1. Photo Stencil shall maintain records documenting that the delisted waste is managed in accordance with the delisting petition.

2. Photo Stencil shall maintain all records required by number one above for a period of at least three years.

d. Disposal Requirements 1. The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2).

123 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 007 RESERVED 124 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 008 FACILITY: Advanced Surface Technologies, Inc.

ADDRESS: 6155 West 54th Avenue, Arvada, CO 80002 WASTE: Wastewater treatment sludge generated from the on-site wastewater pretreatment of electrolytic and electroless plating operations. EPA Hazardous Waste Codes F006 and F019 generated after the effective date of this delisting.

CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on April 8, 2008 under the following conditions: a. Changes to Current Operations 1. Advanced Surface Technologies, Inc. must notify the Division at least 30-days prior to implementing any major change to the electrolytic and/or electroless plating processes at the Facility. A major change is any change including alteration of the current wastewater treatment process or incorporating different hazardous chemicals or reagents such that the composition of the wastewater treatment sludge is altered. 2. Advanced Surface Technologies, Inc. must notify the Hazardous Waste Compliance Unit of the Hazardous Materials and Waste Management Division within 15 days after implementing any change to the wastewater treatment, or electrolytic and/or electroless plating processes that cause a significant change in the type or concentration of any hazardous constituent in the waste. Advanced Surface Technologies, Inc. shall also notify the Division whenever the sludge exhibits a characteristic of hazardous waste. A significant change is defined as an increase in the total waste concentration for any constituent identified below:

Concentration Requiring Average 2xs the Standard CDPHE Notification (Two Constituent Concentration (ppm) Deviation Standard Deviations above the average concentration)

Cyanide (amenable) 0.23 0.51 0.74 Cyanide 0.28 0.35 0.63 Chromium VI 39.50 35.17 74.67 Chromium III 5,350 4,704.25 10,054.25 Mercury < 0.02 Non-detect Detection Arsenic 7.17 13.91 11.08 Cadmium 10.55 15.06 25.61 Copper 17,500 7,468 24,968 Lead 17.20 25.76 42.96 Nickel 20,450 10,558 31,008 Selenium < 5.00 Non-detect Detection Silver 42.33 27.15 69.48 Barium 3.43 3.91 7.34 A significant change also includes the detection of any additional Part 264, Appendix IX hazardous constituents that are not identified above.

125 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 3. The Division reserves the right to re-evaluate and, if necessary, remove this approval or modify these conditions in the event that a significant change, as defined above, is reported by Advanced Surface Technologies, Inc. In such case, the Division may remove this delisting or impose temporary requirements on the delisted waste until such time as an appropriate amendment to this delisting can be considered by the Solid and Hazardous Waste Commission.

b. Sampling Requirements Advanced Surface Technologies, Inc. shall conduct annual verification sampling of the delisted waste to monitor for any significant change in the type or concentration of any hazardous constituents in the waste. Annual verification sampling shall be submitted to the Division within sixty (60) days of the sampling event for review against initial delisting criteria and sampling methodology.

c. Storage Requirements 1. The delisted waste generated by Advanced Surface Technologies, Inc. may not be accumulated on-site for a period in excess of one year. 2. The volume of delisted waste accumulated on-site may not exceed 40 cubic yards or 28 tons at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” and with an accumulation start date. The container must be kept closed except for when waste is being added to or removed from the container.

d. Recordkeeping Requirements 1. Advanced Surface Technologies, Inc. shall maintain records of the disposal or recycling of all delisted waste that documents that such activities are in accordance with the delisting petition.

2. Advanced Surface Technologies, Inc. shall maintain all records required by paragraph d.1. above for a period of at least three years.

e. Disposal Requirements The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2) or recycled at an appropriate metal reclamation facility. 126 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 009 FACILITY: Depuy Synthes ADDRESS: 1051 Synthes Avenue, Monument, Colorado 80132 WASTE: Wastewater treatment sludge and micron filters from the on-site treatment of wastewater generated from electroplating operations (anodizing and chemical etching). EPA hazardous waste code F006 generated after the effective date of this delisting. CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on August 4, 2014 and under the following conditions: a. Changes to Current Operations 1. Depuy Synthes must notify the Hazardous Materials and Waste Management Division (the Division) at least 30-days prior to implementing any major change to the electroplating processes at the Facility. A major change is any change including alteration of the current wastewater treatment process or incorporating different chemicals or reagents into the process such that the composition of the wastewater treatment sludge is altered.

2. Depuy Synthes must notify the Division within 15-days after implementing any change to the wastewater treatment or electroplating processes that causes a significant change in the type or concentration of any hazardous constituent in the waste or causes the waste to exhibit a hazardous waste characteristic. A significant change is defined as an increase in the total waste concentration for any constituent identified below: Concentration Requiring Notification to the Division Average Concentration 2xs the Standard Constituent (Two Standard Deviations (ppm) Deviation above the Average Concentration)

Arsenic Non-detect Non-detect Detection Barium 19.0 42.8 61.8 Cadmium Non-detect Non-detect Detection Chromium (Total) 6,170 13,585.4 19,755.4 Chromium VI 0.035 0.08 0.12 Copper 525.5 1,157.8 1,683.3 Cyanide (amendable) Non-detect Non-detect Detection Cyanide (free/reactive) 0.005 0.0002 0.0052 Lead 870.4 2,139.0 3,009.4 Mercury 0.11 0.04 0.15 Nickel 2,197 4,958.6 7,155.6 Selenium Non-detect Non-detect Detection Silver 1.53 3.44 4.97 A significant change also includes the detection of any additional Part 264, Appendix IX hazardous constituents that are not identified in the above table. 127 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 3. The Division reserves the right to re-evaluate and, if necessary, remove this approval or modify these conditions in the event that a significant change, as defined above, is reported by Depuy Synthes. In such case, the Division may remove this delisting or impose temporary requirements on the delisted waste until such time as an appropriate amendment to this delisting can be considered by the Solid and Hazardous Waste Commission.

b. Sampling Requirements Depuy Synthes shall conduct annual verification sampling of the delisted waste in January of each year to monitor for any significant change in the type or concentration of any hazardous constituents in the delisted waste. Annual verification sampling shall be submitted to the Division within sixty (60) days of the sampling event for review against initial criteria and sampling methodology.

c. Storage Requirements 1. The delisted waste generated by Depuy Synthes may not be accumulated on-site for a period in excess of one year.

2. The volume of delisted waste accumulated on-site may not exceed 20 cubic yards at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” and with an accumulation start date. The container must be kept closed except for when waste is being added to or removed from the container.

d. Recordkeeping Requirements 1. Depuy Synthes shall maintain records of the disposal or recycling of all delisted waste that documents that such activities are in accordance with the delisting petition. 2. Depuy Synthes shall maintain all records required by paragraph d.1 above for a period of at least three years.

e. Disposal Requirements The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2) or recycled at an appropriate metals reclamation facility. 128 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 10 FACILITY: Acme Manufacturing ADDRESS: 4650 S. Leydon St., Unit A, Denver, Colorado 80216 WASTE: Wastewater treatment sludge from the on-site treatment of wastewater generated from zinc and chromate plating on cold rolled steel. EPA hazardous waste code F006 generated after the effective date of this delisting.

CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on October 18, 2018 and under the following conditions: a. Changes to Current Operations 1. Acme Manufacturing must notify the Hazardous Materials and Waste Management Division (the Division) at least 30-days prior to implementing any major change to the electroplating processes at the Facility. A major change is any change including alteration of the current wastewater treatment process or incorporating different chemicals or reagents into the process such that the composition of the wastewater treatment sludge is altered.

2. Acme Manufacturing must notify the Division within 15-days after implementing any change to the wastewater treatment or electroplating processes that causes a significant change in the type or concentration of any hazardous constituent in the waste or causes the waste to exhibit a hazardous waste characteristic. A significant change is defined as an increase in the total waste concentration for any constituent identified below: Constituent Average 2xs the Standard Concentration Requiring Concentration Deviation Notification to the Division (Two (ppm) Standard Deviations above the Average Concentration)

Arsenic Non-detect Non-detect Detection Barium 13.2 1.4 14.6 Cadmium Non-detect Non-detect Detection Chromium (Total) 1,740 193 1,933 Chromium VI Non-detect Non-detect Detection Copper 40.1 6.8 46.9 Cyanide (amenable) Non-detect Non-detect Detection Cyanide (free/reactive) Non-detect Non-detect Detection Lead 6.1 1.0 7.1 Mercury Non-detect Non-detect Detection Nickel 28.8 3.7 32.5 Selenium Non-detect Non-detect Detection Silver Non-detect Non-detect Detection Zinc 78,325 8,569 86,894 A significant change also includes the detection of any additional Part 264, Appendix IX hazardous constituents that are not identified in the above table. 129 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 3. The Division reserves the right to re-evaluate and, if necessary, remove this approval or modify these conditions in the event that a significant change, as defined above, is reported by Acme Manufacturing. In such case, the Division may remove this delisting or impose temporary requirements on the delisted waste until such time as an appropriate amendment to this delisting can be considered by the Solid and Hazardous Waste Commission.

b. Sampling Requirements Acme Manufacturing shall conduct annual verification sampling of the delisted waste in January of each year to monitor for any significant change in the type or concentration of any hazardous constituents in the delisted waste. Annual verification sampling shall be submitted to the Division within sixty (60) days of the sampling event for review against initial criteria and sampling methodology.

c. Storage Requirements 1. The delisted waste generated by Acme Manufacturing may not be accumulated on-site for a period in excess of one year.

2. The volume of delisted waste accumulated on-site may not exceed 20 cubic yards at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” and with an accumulation start date. The container must be kept closed except for when waste is being added to or removed from the container.

d. Recordkeeping Requirements 1. Acme Manufacturing shall maintain records of the disposal or recycling of all delisted waste that documents that such activities are in accordance with the delisting petition. 2. Acme Manufacturing shall maintain all records required by paragraph d.1 above for a period of at least three years.

e. Disposal Requirements The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2) or recycled at an appropriate metals reclamation facility. 130 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division DELISTING #: 11 FACILITY: Golden Aluminum, Inc.

ADDRESS: 1405 East 14th Street, Fort Lupton, CO 80621 WASTE: Wastewater Treatment Sludge from Aluminum Cleaning and Conversion Coating Operations. EPA Hazardous Waste Code F019 generated after the effective date of this delisting. CONDITIONS: This delisting is valid only for the waste stream specified above and referenced in the delisting petition submitted on May 12, 2022 and November 2022 under the following conditions: a. Changes to Current Operations 1. Golden Aluminum, Inc. must notify the Division at least 30-days prior to implementing any major change to the chemical conversion coating process. A major change is any change including alteration of the current wastewater treatment process or incorporating different chemicals or reagents such that the composition of the wastewater treatment sludge is altered.

2. Golden Aluminum, Inc. must notify the Division within 15-days after implementing any change to the wastewater treatment or chemical conversion coating processes that causes a significant change in the type or concentration of any hazardous constituent in the waste or causes the waste to exhibit a hazardous waste characteristic. A significant change is defined as an increase in the total waste concentration for any constituent identified below:

Constituent Average 2xs the Standard Concentration Requiring Concentration Deviation Notification to the Division (Two (ppm) Standard Deviations above the Average Concentration)

Arsenic 2.3 1.7 4.0 Barium 7.1 16.0 23.1 Cadmium Non-detect Non-detect Detection Chromium (Total) 12,333 1,154 13,487 Chromium VI 158 306 464 Copper 4.2 6.0 10.2 Cyanide (amendable) Non-detect Non-detect Detection Cyanide (free/reactive) Non-detect Non-detect Detection Lead 4.9 NA 4.9 Mercury Non-detect Non-detect Detection Nickel 5.3 4.0 9.3 Selenium Non-detect Non-detect Detection Silver Non-detect Non-detect Detection Zinc 10.6 20.0 30.6 A significant change also includes the detection of any additional Part 264, Appendix IX hazardous constituents that are not identified in the above table. 131 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division 3. In the event that a significant change, as defined above, is reported by Golden Aluminum, Inc., the Division may suspend this delisting or impose temporary requirements on the delisted waste until such time as an appropriate amendment to this delisting can be considered by the Solid and Hazardous Waste Commission. b. Sampling Requirements Golden Aluminum, Inc. shall conduct annual verification sampling of the delisted waste in January of each year to monitor for any significant change in the type or concentration of any hazardous constituents in the delisted waste. Annual verification sampling shall be submitted to the Division within sixty (60) days of the sampling event for review against initial criteria and sampling methodology for both total waste concentration and Toxicity Characteristic Leaching Procedure (TCLP).

c. Storage Requirements 1. The delisted waste generated by Golden Aluminum, Inc. may not be accumulated on-site for a period in excess of one year.

2. The volume of delisted waste accumulated on-site may not exceed 20 cubic yards at any given time.

3. The delisted waste must be stored in a container that is capable of being closed. The container must be marked or labeled to identify the contents as “delisted waste” and with an accumulation start date. The container must be kept closed except for when waste is being added to or removed from the container.

d. Recordkeeping Requirements 1. Golden Aluminum, Inc. shall maintain records of the disposal or recycling of all delisted waste that documents that such activities are in accordance with the delisting petition. 2. Golden Aluminum, Inc. shall maintain all records required by paragraph d.1 above for a period of at least three years.

e. Disposal Requirements The delisted waste shall be disposed in a landfill meeting the requirements of the Colorado Solid Waste Regulations (6 CCR 1007-2).

132 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division Statement of Basis and Purpose Part 261 - Identification and Listing of Hazardous Waste Purpose The fundamental purpose of the Part 261 regulations which are promulgated pursuant to C.R.S. 1973, 25-15-302(2) is to identify those wastes, which, because of the public health and environmental hazards that they may pose in transportation, treatment, storage or disposal, are subject to regulation as hazardous wastes.

Additionally, regulations concerning the identification and listing of hazardous waste are a necessary and required component in conducting a hazardous waste management program; the State intends to obtain EPA authorization for a hazardous waste management program pursuant to C.R.S. 1973, 25-15-302. Such full state authorization to conduct the hazardous waste regulatory program can be granted only upon the determination that the State program is equivalent to that of the EPA. Basis These regulations are based upon a “cradle-to-grave” system of regulation of hazardous waste. Under this system, hazardous waste is tracked and regulated from the point of generation through storage and transportation to the point of treatment and/or disposal. In this manner, a major portion of the hazardous waste generated in the State is regulated and accounted for, thereby minimizing the potential for public health and environmental problems resulting from improper management, handling, transportation and disposal of these wastes. The great potential for public health and environmental problems, including hazards associated with fire, explosion, direct contact, and air, surface water and groundwater contamination resulting from inadequate management of hazardous wastes has been documented at hundreds of sites throughout the nation and has spurred the development of hazardous waste regulations pursuant to the Resource Conservation and Recovery Act (RCRA) of 1976, Public Law 94-580 These regulations are based, for the most part, on those developed by the EPA under Subtitle C of RCRA. This was done for the reasons discussed below. Because the Federal hazardous waste regulations are comprehensive and technically complex, it was felt that adopting the Federal format and amending specific sections to the needs of the State, as opposed to developing State regulations “from scratch”, would save substantial amounts of time and financial resources. Also, it was felt that the process of determination of initial program equivalency would be greatly simplified through adoption of the Federal format. Further, because the Federal regulations are presently subject to frequent amendment, adoption of the Federal format greatly enhances maintaining equivalency of the State regulations to the Federal program.

As stated above, much of the scientific basis for these regulations was developed in the course of EPA research and investigations over a period of several years. Therefore, all information utilized by EPA in developing and proposing these regulations, including that referenced in the Federal Register Volume 45, Number 98, May 19, 1980 p. 33066 et seq. is hereby incorporated in this statement by reference. Pursuant to amendments made to this part 261 effective April 30, 1993, the information contained in the following Federal Registers is incorporated by reference: 55 FR 18726; 56 FR 27300-27330; 55 FR 46354-46397; 56 FR 21955-21960; 55 FR 5340-5342; 55 FR 18496-18506; 54 FR 50968; 53 FR 43881- 43884; 53 FR 43878-43881; and 56 FR 19951.

The basis for these regulations was further developed through a series of twelve public meetings at which comments were received from interested parties. Accordingly, certain changes from the Federal regulations have been incorporated in these regulations where it was deemed advisable as a result of public comment and study of the issues, in order to tailor the regulations more to Colorado’s needs. Such departures from the approach taken in the Federal regulations are discussed in this document under the pertinent topics.

133 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division The Regulations These regulations define the terms “solid waste” and “hazardous waste,” and identify those wastes which are excluded from these regulations. This is necessary in order to characterize the universe of materials which are subject to regulation.

Under the definition of hazardous waste, § 261.3, the phrase “if it has no commercial use or value” has been added as a restriction on the EPA definition. The basis for this action was to achieve consistency with the definition of hazardous waste under C.R.S. 1973, 25-15-101(9)(a). Also, under the Exclusions Section — materials which are not solid wastes, the following additions were listed in order to provide consistency with C.R.S. 1973, 25-15-101(9)(a): -inert materials used for construction fill or top soil placement or changing contour for agriculture or mining purposes; -any materials or waste exempted or not regulated as hazardous waste under the Federal Act. Subpart B of these regulations sets forth criteria used to identify characteristics and to list particular hazardous wastes. Since there are hazardous wastes which meet these criteria, but which are not listed under Subpart D nor meet the characteristics under Subpart C, the regulations provide that the Department may identify such a waste as hazardous for purposes of these regulations. This provision is necessary in order to protect public health and the environment by ensuring that all hazardous wastes are adequately managed under these regulations. Hazardous wastes under Subpart C may be subject to regulation based on four characteristics defined in the regulations. These characteristics are ignitability, corrosivity, reactivity and (EP) toxicity. This allows a waste to be characterized as hazardous without specifically listing it by name or waste stream. Additionally, Subpart D lists particular hazardous waste, both by specific industrial process waste streams and as discarded commercial products. The discarded commercial products list is further subdivided into toxic and acutely hazardous wastes. Additionally, these regulations establish special, reduced management requirements for hazardous waste produced by small quantity generators. Small quantity generators are defined as those who generate less than 1,000 kilograms of hazardous waste per month, or less than 1 kilogram of acutely toxic waste within one month. Under this small quantity generator provision, those who treat or dispose of their own waste on-site must have a permit under these regulations or written Departmental approval. This requirement was added by the State in order to clarify the responsibilities of small quantity generators, and to ensure that such activities are conducted in a manner which does not threaten public health or the environment. If hazardous waste is disposed off-site, the waste must be delivered to an interim status or permitted facility, or a state-approved facility.

These regulations also include special requirements for hazardous waste which is used, re-used, recycled or reclaimed. These wastes are subject to reduced regulatory requirements in order to encourage re-use activities. This provision may conflict with C.R.S. 1973, 25-15-101(9)(a) which provides that waste which has commercial use or value is not considered hazardous. EPA is also in the process of revising these re-use regulations and this issue may need to be readdressed in the future. Statement of Basis and Purpose Rule-making Hearing of April 20,1993 Hazardous Waste Management System; Identification and Listing of Hazardous Waste Basis and Purpose.

These amendments to 6 CCR 1007-3, Part 261 are made pursuant to the authority granted to the Hazardous Waste Commission in section 25-15-302(2), C.R.S. Toxicity Characteristic Revisions The Environmental Protection Agency adopted an amendment which exempted from the toxicity characteristic rules certain used chlorofluorocarbon refrigerants which exhibit the toxicity characteristic and which are reclaimed for use. These amendments provide state equivalency with the regulatory requirements of the Environmental Protection Agency.

134 CODE OF COLORADO REGULATIONS 6 CCR 1007-3 Part 261 Hazardous Materials and Waste Management Division The amendments also remove the quality assurance requirement found in Method 1311, Toxicity Characteristic Leaching Procedure for correcting measured values for analytical bias. However, this rule retains appropriate quality assurance provisions, including that matrix spike recoveries be calculated and that the method of standard additions be employed as the quantitation method for metallic contaminants when appropriate as specified in the method. These amendments also provide state equivalency with the regulatory requirements of the Environmental Protection Act This Basis and Purpose incorporates by reference the preamble language for the Environmental Protection Agency regulations published in the Federal Register at 55 FR 5910-5915, February 13, 1991, and at 55 FR 55114, November 24, 1992.

Exclusion of Certain Wastes The Environmental Protection Agency amended the federal regulations to exclude from the definition of solid waste those coke by-product residues that are recycled by being returns to coke ovens as a feedstock to produce coke; returned to the tar recovery process as a feedstock to produce coal tar; or mixed with coal tar prior to coal tar refining or sale. The Agency also excluded the similarly-situated hazardous waste K087 when recycled in those ways. These amendments mirror the Agency’s amendments.

The promulgation of these amendments provide state equivalency with the regulatory requirements of the Environmental Protection Agency.

This Basis and Purpose incorporates by reference the preamble language for this amendment published in the Federal Register at 57 FR 27880-27888 on June 22, 1992. _________________________________________________________________________ Editor’s Notes 6 CCR 1007-3 has been divided into smaller sections for ease of use. Versions prior to 4/30/2004 and rule history are located in the first section, 6 CCR 1007-3. Prior versions can be accessed from the All Versions list on the rule’s current version page. To view versions effective after 4/30/2004, select the desired part of the rule, for example 6 CCR 1007-3 Part 260, or 6 CCR 1007-3 Part 8. History [For history of this section, see Editor’s Notes in the first section, 6 CCR 1007-3] 135