1. (a) On every document requiring an Interior Designer's seal, the Interior Designer shall affix or cause the affixation of a seal that will produce a clearly visible and legible image of the seal when the document is copied or reproduced. An Interior Designer may not affix or authorize the affixation of an impression or embossing seal on a document requiring a seal unless the impression or embossing seal will produce a clearly visible and legible image of the seal when the document is copied or reproduced.
2. (b) The design of an Interior Designer's seal shall be the same as the design of the sample seal shown in this Subsection except that the name of the Interior Designer and the Interior Designer's registration number shall be substituted for the name and registration number shown on the sample seal. The diameter of the seal shall be no smaller than one and one-half (1.5) inches.
   Attached Graphic
   
3. (c) A document regulated by this Subchapter may be issued electronically or in any other format selected by the Interior Designer whose seal and signature are affixed to the document.

Source Note:The provisions of this §5.112 adopted to be effective August 2, 2000, 25 TexReg 7169; amended to be effective September 29, 2003, 28 TexReg 8334.