Thе MEDICINES COMPANY, Plaintiff-Cross-Appellant v. MYLAN, INC., Mylan Pharmaceuticals Inc., Bioniche Pharma USA, LLC, Defendants-Appellants
2015-1113, 2015-1151, 2015-1181
United States Court of Appeals, Federal Circuit
April 6, 2017
853 F.3d 1296
Finally, Novartis contends that substantial evidence does not support the PTAB‘s finding that a PHOSITA would have predicted that “rivastigmine has the potential to oxidatively degrade based on its [chemical] structure.” Appellants’ Br. 60 (capitalization omitted). In support of its position, Novartis again cites the testimony of Dr. Klibanоv, who purportedly testified that the chemical structure of a compound cannot alone inform whether that compound is susceptible to oxidative degradation. See id. at 64-65. Novartis‘s final argument fails for the same reasons as its first two arguments: it ignores the PTAB‘s findings as to the skill in the art possessed by a PHOSITA, and substantial evidence supports the PTAB‘s finding that a PHOSITA would have predicted that rivastigmine has the potential to oxidatively degrade based on its chemical structure. See J.A. 1350-51, 1846, 2892. Novartis asks us to give greater weight to the testimony of Dr. Klibanov than did the PTAB, which we may not do. See Warsaw, 832 F.3d at 1333.
CONCLUSION
The PTAB found the Asserted Claims unpatentable as obvious for additional reasons not discussed above. See Noven I, 2015 WL 5782080, at *23; Noven II, 2015 WL 5782081, at *23. However, because we affirm the PTAB‘s conclusions that the Asserted Claims would have been unpatentable as obvious on the grounds discussed, we need not address the alternative grounds of unpatentability. See In re Gleave, 560 F.3d 1331, 1338 (Fed. Cir. 2009) (declining to address alternative grounds of unpatentability when the court upholds one such ground). Therefore, for the foregoing reasons, the Final Written Decisions of the U.S. Patent and Trademark Office‘s Patent Trial and Appeal Board are
AFFIRMED
Before DYK, WALLACH, and HUGHES, Circuit Judges.
DYK, Circuit Judge.
The Medicines Company (“Medicines“) is the owner of
The district court held on summary judgment that the asserted claims of the ‘343 patent were not infringed because Mylаn did not satisfy the “efficient mixing” limitation of those claims. After conducting a bench trial, the court held that the asserted claims of the ‘727 patent were infringed because those claims did not include an “efficient mixing” limitation.
We hold that both the ‘727 and ‘343 patents include a “batches” limitation that requires batch consistency, which, according to the patents in suit, is achieved through efficient mixing. Efficient mixing is therefore required by the asserted claims of both patents. We further construe efficient mixing as defined by Example 5 of the patents’ specification. We therefore reverse the district court‘s judgment of infringement with respect to the ‘727 patent, and affirm its summary judgment of noninfringement with respect to the ‘343 patent. We do not address the validity of the patents in suit.
BACKGROUND
I
The ‘727 and ‘343 patents are directed to pharmaceutical formulations—or “batches“—of the drug bivalirudin produced through a process that consistently minimizes impurities. Bivalirudin is a synthetic peptide used to prevent blood clotting in patients undergoing cardiac catheterization. This clinical application arises from the drug‘s ability to act as a reversible inhibitor of thrombin, a key enzyme in the cascade of biochemical reactions responsible for the formation of blood clots. Bivalirudin‘s pharmacological properties were known in the art, well before the filing of the patents in suit, and were covered by a patent owned by Medicines that expired in 2015,
The claimed inventions of the ‘727 and ‘343 patents are directed to minimizing impurities in batches of bivalirudin that have been compounded with a base. See ‘727 patent, col. 2 ll. 19-22; ‘343 patent, col. 2 ll. 19-22. Bivalirudin as an active ingredient is typically distributed or sold as a dry powder that must be compounded with a base, before being reconstituted in a clinical setting and administered to a patient as an intravenous injection. Reconstitution involves dissolving the drug (in dry powder form) in an aqueous solvent such as water or saline. Because dissolving bivalirudin by itself (without a base) results in an acidic solution not suitable for injection, commercial forms of bivalirudin compound bivalirudin with a base, which increases the pH of the reconstituted drug to a clinically acceptable level.
II
Medicines received approval from the Food & Drug Administration (“FDA“) to
Between 2001 and 2005, Medicines and its contract manufacturer, Ben Venue Laboratories (“BVL“), produced and sold numerous batches of compounded bivalirudin having Asp9 levels of less than 1.5 percent. Although the “old compounding process,” Medicines Co. v. Mylan Inc., 72 F. Supp. 3d 837, 850 (N.D. Ill. 2014), used by Medicines and BVL to produce ANGIOMAX® “resulted in variable and sometimes high levels of Asp9 impurities,” id. at 847, the overriding majority of these batches in fact had Asp9 levels below 0.6 percent (the level specified in the asserted claims). As the district court observed, “79 of 87 prior art ANGIOMAX® batches had Asp9 levels at or below about 0.6% and [Medicines] sold dozens of these batches prior to the critical date.” Id. at 864.
In 2005 and 2006, however, Medicines prоduced two batches of ANGIOMAX® with Asp9 levels above the 1.5 percent limit specified by the FDA. After failing to solve the problem of inconsistent batches internally, Medicines retained a consultant, Dr. Gary Musso, who together with Dr. Gopal Krishna, an employee of Medicines at the time, identified the compounding process used by BVL as the source of the problem. Drs. Krishna and Musso are the named co-inventors of the ‘727 and ‘343 patents.
The process of compounding bivalirudin generally involves three steps: (1) forming a bivalirudin solution by dissolving the drug in an aqueous solution; (2) mixing the bivalirudin solution with a pH-adjusting solution containing a base; and (3) removing solvents to yield the final compounded drug product. See Medicines, 72 F. Supp. 3d at 843. The ‘727 and ‘343 patents explain that in mixing the pH-adjusting solution into the bivalirudin solution, “concentrated sites in the compounding solution that have much higher pH levels” are formed. See, e.g., ‘727 patent, col. 9 ll. 20-22. These localized “hot spots” catalyzed the degradation of bivalirudin to Asp9-bivalirudin, resulting in undesirable high levels of the impurity in some instances. See, e.g., id. col. 9 l. 19.
Based on this principle, Drs. Krishna and Musso developed an improved, “efficient mixing” process for mixing the pH-adjusting solution with the bivalirudin solution that minimized the formation of these hotspots. See Medicines, 72 F. Supp. 3d at 848. This improved “efficient mixing” process resulted in batches that consistently satisfied the FDA‘s 1.5 percent limit on the level of Asp9-bivalirudin. Moreover, based on Drs. Krishna and Musso‘s experiments, Medicines discovered that the Asp9 level of batches compounded using the improved “efficient mixing” process never exceeded 0.6 percent. See id. at 848-49.
This batch consistency of bivalirudin drug products compounded using “efficient mixing” is the invention disclosed and claimed by the patents in suit, which were filed on the same day and share nearly identical specifications. See Medicines Co.
Representative claim 1 of the ‘727 patent provides:
1. Pharmaceutical batches of a drug product comprising bivalirudin wherein the batches have a pH adjusted by a base, said pH is about 5-6 when reconstituted in an aqueous solution for injection, and wherein the batches have a maximum impurity level of Asp9-bivalirudin that does not exceed about 0.6% as measured by HPLC.
‘727 patent, col. 25 ll. 56-64 (emphasis added).
Representative claim 1 of the ‘343 patent provides:
1. Pharmaceutical batches of a drug product comprising bivalirudin ... prepared by a compounding process comprising:
(i) dissolving bivalirudin in a solvent to form a first solution;
(ii) efficiently mixing a pH-adjusting solution with the first solution to form a second solution, wherein the pH-adjusting solution comprises a pH-adjusting solution solvent; and
(iii) removing the solvent and pH-adjusting solution solvent from the second solution;
wherein the batches have a pH adjusted by a base, said pH is about 5-6 when reconstituted in an aqueous solution for injection, and wherein the batches have a maximum impurity level of Asp9-bivalirudin that does not exceed about 0.6% as measured by HPLC.
‘343 patent, col. 27 ll. 13-31 (emphasis added).
The emphasized claim limitation is common tо both patents, and we refer to this shared limitation as the “batches limitation.” The term “pharmaceutical batches” is defined by the patents as follows:
As used here, “batch” or “pharmaceutical batch” refers to material produced by a single execution of a compounding process of various embodiments of the present invention. “Batches” or “pharmaceutical batches” as defined herein may include a single batch, wherein the single batch is representative of all commercial batches (see generally, Manual of Policies and Procedures, Center for Drug Evaluation and Research, MAPP 5225.1, Guidance on the Packaging of Test Batches at 1), and wherein the levels of, for example, Asp9-bivalirudin, total impurities, and largest unknown impurity, and the reconstitution time represent levels for all potential batches made by said prоcess. “Batches” may also include all batches prepared by a same compounding process.
‘727 patent, col. 5 ll. 24-36; ‘343 patent, col. 5 ll. 24-36.
III
Seeking to market a generic version of ANGIOMAX®, Mylan submitted an ANDA to the FDA in 2010. In its ANDA, Mylan stated that it would limit the Asp9 level of its generic product to less than 2.0 percent. See Medicines, 72 F. Supp. 3d at 846. Mylan also made a paragraph IV certification under the provisions of the Hatch-Waxman Act,
The parties disputed the meaning of two claim terms: “pharmaceutical batches” and
With respect to “efficiently mixing,” the district court relied on two examples set forth in the patents’ specifications comparing Medicines’ “old compounding process” using “inefficient mixing conditions” (Example 4) with the improved “efficient mixing” process developed by Drs. Krishnа and Musso (Example 5). See id. at *14-15; see also ‘727 patent, col. 21 l. 44-col. 24 l. 35; ‘343 patent, col. 22 l. 21-col. 25 l. 3. The court ultimately agreed that Medicines had disclaimed the “inefficient mixing conditions” of Example 4 and adopted Mylan‘s proposed construction of “efficiently mixing” to require “not using inefficient mixing conditions such as described in Example 4.” Medicines, 2012 WL 3234282, at *15.
Based on these claim constructions, the district court held on summary judgment that Mylan‘s ANDA did not infringe the ‘343 patent because the material facts concerning Mylan‘s compounding process were not in dispute and these “undisputed facts show[ed] that Mylan‘s compounding process is more inefficient than the ‘inefficient mixing’ process” of Example 4. See Medicines Co. v. Mylan Inc., 2013 WL 6633085, at *10 (N.D. Ill. Dec. 16, 2013). With respect to the ‘727 patent, however, the court held that “efficiently mixing” was not a claim limitation and determined that factual disputes concеrning the Asp9 level of Mylan‘s ANDA product precluded summary judgment. See id. at *20.
The district court conducted a six-day bench trial with respect to infringement and validity of the ‘727 patent. In its post-trial opinion, the court rejected Mylan‘s invalidity contentions and held that Mylan‘s ANDA infringed the ‘727 patent as a matter of law. In so holding, the district court appeared to assume that any batch with an Asp9 level below 0.6 percent would infringe the claims, even though the court had earlier determined that the prior art disclosed such batches. The court reasoned that “Mylan‘s ANDA specification [would] allow[] it to market a drug product with Asp9 ... levels from 0.0%-2.0%, a range that includes the ‘727 patent‘s claimed ranges of 0.0-0.6%,” and “[w]hat a generic applicant asks for and receives approval to market, if within the scope of a valid claim, is an infringement.” See Medicines, 72 F. Supp. 3d at 883-85 (quoting Sunovion Pharms., Inc. v. Teva Pharms. USA, Inc., 731 F.3d 1271, 1279 (Fed. Cir. 2013)). Thе court again rejected Mylan‘s argument that the claims of the ‘727 patent required “efficient mixing” and entered final judgment in favor of Medicines on all claims and counterclaims with respect to the ‘727 patent. Id. at 886-88.
Mylan has appealed the district court‘s judgment of infringement and no invalidity of the ‘727 patent, and Medicines has cross-appealed the district court‘s summary judgment of noninfringement of the ‘343 patent. We have jurisdiction pursuant to
Shortly after the completion of briefing in this case, the panel issued an opinion holding the ‘727 and ‘343 patents invalid under the on-sale bar of
The full court subsequently granted Medicines’ petition for rehearing en banc in Hospira, and on rehearing held that Medicines’ relationship with BVL did not give rise to an invalidating “commercial offer for sale” under Pfaff v. Wells Elecs., Inc., 525 U.S. 55, 57-68 (1998). See Medicines Co. v. Hospira, Inc., 827 F.3d 1363, 1373-74 (Fed. Cir. 2016) (en banc). We reopened and stayed this appeal when the court granted rehearing in Hospira. Following the court‘s en banc decision, we requested the parties submit supplemental briefs. We now decide this appeal on the merits.1
DISCUSSION
Our review of the district court‘s summary judgment is plenary. See, e.g., Glaxo Grp. Ltd. v. TorPharm, Inc., 153 F.3d 1366, 1370 (Fed. Cir. 1998). We review the district court‘s factual findings after a bench trial for clear error and the court‘s legal conclusions de novo. See, e.g., Braintree Labs., Inc. v. Novel Labs., Inc., 749 F.3d 1349, 1358 (Fed. Cir. 2014). The district court‘s claim constructions present pure questions of law subject to de novo review because the court made no factual findings сoncerning extrinsic evidence in construing the disputed claim terms. See, e.g., In re Papst Licensing Dig. Camera Patent Litig., 778 F.3d 1255, 1261 (Fed. Cir. 2015).
I
Mylan argues on appeal that the district court erred by declining to interpret the claims of the ‘727 patent to require “efficient mixing” as part of the batches limitation. We agree with Mylan that “efficient mixing” is required by the batches limitation and is therefore a limitation of both the ‘727 and ‘343 patents.
The batches limitation restricts the claims of the ‘727 patent (as well as the ‘343 patent) to “batches hav[ing] a maximum impurity level of Asp9-bivalirudin that does not exceed about 0.6%.” At the outset, we note that the batches limitation cannot be literally construed to cover individual batches of base-compounded bivalirudin having Asp9 levels that “do[] not exceed about 0.6%.” Such a construction would render the claims of the ‘727 patent invalid in light of Medicines’ numerous pre-critical-date sales of ANGIOMAX® batches having Asp9 levels below 0.6 percent. See Medicines, 72 F. Supp. 3d at 864.
There is no real dispute that the claims require batch consistency vis-à-vis the batches limitation. Indeed, to the extent that Medicines’ “old compounding process” resulted in ANGIOMAX® batches having inconsistent Asp9 levels, see Medicines, 72 F. Supp. 3d at 850, Medicines agrees that batch consistency is the “result of following the patent[s in suit]” and is what “distin[guishes] [them] from the prior art.” See Oral Argument at 1:44, Medicines Co. v. Hospira, Inc., No. 14-1469 (Fed. Cir. Dec. 6, 2016); id. at 3:17 (“Q. The point six limitation is not enough to distinguish the prior art ... it‘s the consistency limitation, right? A. Yes.“).
The patentee, however, takes the position that the batches limitation is not necessarily limited to a compounding process that achieves batch consistency. Instead, according to Medicines, the batches limitation is satisfied whenever an accused infringer cоnsistently produces batches having Asp9 levels below 0.6 percent, and that the claims do not require the use of a particular process that achieves batch consistency.
We disagree, for several reasons. First, adopting Medicines’ interpretation of the batches limitation would yield an unworkable claim construction. Under Medicines’ interpretation, proof of infringement would necessitate forward-looking assessments of whether an accused infringer‘s production of future or “potential” batches would be likely to generate Asp9 levels greater than “about 0.6%.” To illustrate, if a defendant using the same compounding process produced fifty batches each having an Asp9 level below 0.6 percent, each of those fifty batches would infringe. But the defendant would not know whether any of the batches infringed until all fifty batches had been prоduced because if even one of those batches was determined to have an Asp9 level higher than 0.6 percent, none of the batches would infringe. See Oral Argument at 17:00-19:06, Medicines Co. v. Mylan, Inc., No. 15-1113 (Fed. Cir. Dec. 6, 2016). For an ongoing commercial compounding process, this approach cannot provide “reasonable certainty” regarding the scope of the asserted claims. Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); Geneva Pharms., Inc. v. GlaxoSmithKline PLC, 349 F.3d 1373, 1384 (Fed. Cir. 2003) (“A claim is indefinite if its legal scope is not clear enough that a person of ordinary skill in the art could determine whether a particular composition infringes or not.“); Morton Int‘l, Inc. v. Cardinal Chem. Co., 5 F.3d 1464, 1470 (Fed. Cir. 1993) (“[C]laims ... [must be] sufficiently precise to permit a potential competitor to determine whether or not he is infringing.“).
During prosecution of the ‘727 patent (as well as the ‘343 patent), Medicines further represented that “[i]n the present invention, various embodiments relate to a less subjective and more consistent process for the mixing of the pH-adjusting solution with the bivalirudin solution.” J.A. 20122 (emphasis added). Medicines also took pains to distinguish its pre-critical date sales of ANGIOMAX® in observing that “[p]harmaceutical batches ... as described [by the patents in suit], and as prepared by the new process of the present invention ... have not been on sale/marketed/or offered for sale for more than one (1) year as of the [patents‘] filing date.” Id. (emphasis added).
Finally, any remaining doubt that the batches limitation requires a compounding process is dispelled by Medicines’ admission to the district court that “[w]hen viewed in the context of the specification, it is readily apparent that the [definition of ‘pharmaceutical batches‘] refers to the compounding processes described in the patents-in-suit.” Medicines, 2013 WL 6633085, at *15.
Thus, we reject Medicines’ interpretation and conclude that the batches limitation requires the use of a compounding process that achieves batch consistency. In doing so, we note that our decision does not impermissibly add a process limitation to a product claim that does not require a process because the specification‘s definition of “batches” by itself injects a compounding process as a limitation in the asserted claims.2
The question remains as to what that compounding process entails. Based on the intrinsic evidence of the patents in suit, the answer is that the compounding process must use efficient mixing.
The patents’ specification unequivocally states that the “pH-adjusting solution will be efficiently mixed,” and that “[e]fficient mixing of the pH-adjusting solution ... will minimize levels of Asp9-bivalirudin.” See ‘727 patent, col. 8 ll. 54-58 (emphasis added); ‘343 patent, col. 8 ll. 54-58. Indeed, apart from efficient mixing, no part of the patents’ disclosure teaches another methоd capable of producing consistent batches. In comparing the batches resulting from the “inefficient mixing conditions” of Example 4 with those from the “efficient mixing conditions” of Example 5, the specification teaches that “the characteristics of the batches generated by [Example 4] may be variable,” and that “the [efficient mixing] process demonstrated in Example 5 produced batches generally and consistently having lower levels of impurities than the [inefficient mixing] process of Example 4.” ‘727 patent, col. 22, ll. 25-28, col. 23 ll. 24-26 (emphasis added); ‘343 patent, col. 23 ll. 1-4, col. 23 ll. 62-65. Finally, the specification teaches that consistent
The prosecution history confirms that achieving batch consistency requires efficient mixing. Medicines expedited the examination of the applications giving rise to the ‘727 and ‘343 patents by filing substantially the same Petition to Make Special in both applications.3 See Medicines, 2013 WL 6633085, at *5. In these petitions, Medicines explained the problem of high Asp9 levels of batches from its “old compounding process” and stated that “various embodiments” of the “present invention relate to a less subjective and more consistent process for the mixing of the pH-adjusting solution with the bivalirudin solutiоn. This process involves efficiently mixing the pH-adjusting solution and the dissolved bivalirudin solution, which is not performed in the Applicants’ prior compounding process.” J.A. 20122 (emphasis added).
After considering the same intrinsic evidence we have just summarized, the district court concluded that Medicines had disclaimed inefficient mixing. See Medicines, 2012 WL 3234282, at *12-14; see also Southwall Techs., Inc. v. Cardinal IG Co., 54 F.3d 1570, 1576 (Fed. Cir. 1995). Whether we view the patentee as having disclaimed inefficient mixing or construe “batches” to require efficient mixing, see Trustees of Columbia Univ. v. Symantec Corp., 811 F.3d 1359, 1363-64 (Fed. Cir. 2016), at bottom, the compounding process must be one that uses efficient mixing.
Medicines urges that reading the batches limitation to require “efficient mixing” would render the asserted claims of the ‘343 patent—which already recite an “efficiently mixing” step—superfluous, and that the batches limitation extends to compounding processes that do not use efficiеnt mixing. This is not correct. The recitation of other product-by-process limitations in the claims of the ‘343 patent—“dissolving bivalirudin in a solvent to form a first solution” and “removing the solvent and pH-adjusting solution solvent“—means that the claims of the patents in suit would merely overlap, and “overlapping patent claims are not unusual.” Andersen Corp. v. Fiber Composites, LLC, 474 F.3d 1361, 1370 (Fed. Cir. 2007). Divorcing efficient mixing from the batches limitation would also have the impermissible result of “extend[ing] [Medicines‘] monopoly beyond the invention” disclosed, and potentially to the prior art.4
For all these reasons, the reading of the batches limitation that “most naturally aligns with the patent‘s description of the invention” is one that requires “efficient mixing.” Phillips v. AWH Corp., 415 F.3d 1303, 1316 (Fed. Cir. 2005). And “[a]lthough [the ‘727 patent‘s] claim language does not expressly recite [efficient mixing], that is what they mean ... The situation here invоlves specifications that in all respects tell us what the claims mean, buttressed by statements made during prosecution ... Accordingly, to attribute to the claims a meaning broader than any indicated in the patents and their prosecution history would be to ignore the totality of the facts of the case and exalt slogans over real meaning.” Ormco Corp. v. Align Tech., Inc., 498 F.3d 1307, 1316 (Fed. Cir. 2007).
II
The next question is what is meant by “efficient mixing.” Medicines argues that the patents’ common specification defines “efficient mixing” as “mixing [that] is characterized by minimizing levels of Asp9-bivalirudin in the compounding solution,” i.e., below 0.6 percent Asp9-bivalirudin in the intermediate solution.5 Medicines argues that this definition is controlling. We disagree. Although this statement is taken verbatim from the specification, e.g., ‘727 patent, col. 9 ll. 34-35, it does not purport to be definitional because it does not accord with the linguistic formula used by the patentee tо signal the designation of other defined terms—including “batches.” See ‘727 patent, col. 5 ll. 24-36; see also, e.g., id. col. 5 ll. 37-38 (defining “drug product“); id. col. 5, ll. 46-53 (defining “carrier“). As the district court observed, in defining terms, “the patentees use[d] a similar format: the defined term in quotation marks, followed by the terms ‘refers to’ or ‘as defined herein.‘” Medicines, 2012 WL 3234282, at *9; see also ‘343 patent, col. 5 ll. 24-53. Because it departs from this format, the statement Medicines relies on lacks the clear expression of intent necessary for a patentee to act as its own lexicographer. See, e.g., Merck & Co. v. Teva Pharms. USA, Inc., 395 F.3d 1364, 1370 (Fed. Cir. 2005).
More importantly, Medicines’ construction is problematic because it amounts to a mere recitation of the results obtained from “efficient mixing” rather than a definition of what the efficient mixing process is. Before the district court, Medicines “conced[ed] that its proposed definition ... construes that term functionally—i.e., by its intended result.” Medicines, 2012 WL 3234282, at *11.
Although functional limitations in patent claims are not per se objectionable even when the means-plus-function format is not invoked,6 they cannot be “so broad that [they] cause[] the claim to have a potential scope of protection beyond that which is justified by the specification dis-
There is no contention that “efficient mixing” carries an accepted meaning to one of ordinary skill in the art. We therefore turn to the remainder of the specification, “the single best guide to the meaning of a disputed term” and “a concordance for the claims” to determine the process of efficient mixing. Phillips, 415 F.3d at 1315. The specification‘s detailed description teaches that “[e]fficient mixing ... may be achieved through various methods. One such method may bе to add ... the pH-adjusting solution and bivalirudin solution portion-wise.” ‘727 patent, col. 9 ll. 34-38; ‘343 patent, col. 9, ll. 34-38. “Efficient mixing may also be achieved by adding the pH-adjusting solution to the bivalirudin solution at a constant rate ... [or] at [a] variable rate....” ‘727 patent, col. 10 ll. 17-32; ‘343 patent, col. 10 ll. 17-32. “Furthermore, efficient mixing may be achieved through the use of one or more mixing devices ... [such as] a paddle mixer, magnetic stirrer, shaker, re-circulating pump, homogenizer, and any combination thereof. The mixing rate of ... a paddle mixer may be between about 100 rpm and 1000 rpm ... The mixing rate for ... a homogenizer (i.e., high shear mixing) may be between about 300 and about 6000 rpm ... The mixing device may mix continuously ... or at specific periods of time.” ‘727 patent, col. 10 ll. 42-61; ‘343 patent, col. 10 ll. 42-61. “Moreover, efficient mixing may be achieved through adding the pH-adjusting solution to specific sites within the bivalirudin solution ... In cases wherein a mixing device is used, the pH-adjusting solution may be added to the site of the mixing device....” ‘727 patent, col. 11 ll. 10-16; ‘343 patent, col. 11 ll. 10-16.
In our view, these portions of the specification‘s detailed description of efficient mixing are “vague and unhelpful.” Finnigan Corp. v. ITC, 180 F.3d 1354, 1364 (Fed. Cir. 1999). Rather than teaching what efficiently mixing is, the detailed description provides a laundry list of mixing techniques that individually (or in combination) may (or may not) constitute efficient mixing. Thus, unsurprisingly, neither the district court nor the parties relied on this portion of the specification to ascertain the meaning of “efficient mixing.” See Medicines, 2012 WL 3234282, at *8-14. We similarly decline to do so.
Apart from the detailed description, two embodiments disclosed by the specification—Examples 4 and 5—clearly state what efficient mixing is and is not.
Example 4 describes “inefficient mixing“:
Example 4: Effects of Rapidly Adding pH Adjusting Solution to the Bivaliru-
din Solution Under Inefficient Mixing Conditions—Large Scale Study The pH-adjusting solution was added to the bivalirudin solution either all at once, or rapidly in multiple portions, while the bivalirudin solution was mixed by two paddle mixers located at the top and bottom of the bivalirudin solution. Both paddle mixers operated at a rate of between about 400 and about 800 rpm.
‘727 patent, col. 21 ll. 44-64; ‘343 patent, col. 22 ll. 23-42.
Example 5 describes “efficient mixing“:
Example 5: Effects of Adding pH Adjusting Solution at a Constant Rate and Under Efficient Mixing Conditions—Large Scale Study
The pH-adjusting solution was added to the bivalirudin solution at a controlled rate of 2 L/min using a peristaltic pump. A homogenizer was used to provide a high shear mixing environment (between about 1000 rpm and 1300 rpm) within the bivalirudin solution as the pH-adjusting solution was added[.] A feed tube extended from the peristaltic pump to an inlet in the homogenizer, so that the pH-adjusting solution was added to the bivalirudin solution at a site adjacent to the blades of the homogenizer. Simultaneously, a paddle mixer was used for mixing (mixing rate of between about 300 rpm and 700 rpm) near the surface of the bivalirudin solution.
‘727 patent, col. 22 ll. 30-58; ‘343 patent, col. 23 ll. 6-31.
The district court relied on the “inefficient mixing conditions” of Example 4 to construe “efficient mixing” as “not using inefficient mixing conditions such as described in Example 4.” Medicines, 2012 WL 3234282, at *15. On appeal, Medicines repeatedly criticizes the court‘s negative construction as failing to define what “efficient mixing” is, as opposed to what it is not.7 Although there is no per se rule against negative constructions, see Amgen Inc. v. Hoechst Marion Roussel, Inc., 314 F.3d 1313, 1329 (Fed. Cir. 2003), Medicines’ argument carries some force. The logic of the argument suggests that that we should look to the specification‘s only clear delineation of what “efficient mixing” is—Example 5.
Critically, Medicines relied on the mixing parameters of Example 5 to overcome prior art cited during prosecution and did not cite any other examples of efficient mixing—including the generic teachings of the detailed description. In response to an anticipation rejection based on inherency, Medicines argued that the properties of the batches obtained from the mixing conditions of Example 5 were not “inherent ... but rather [were] influenced by the process used to generate the product.” J.A. 20182. Medicines emphasized that although Example 4 used “two paddle mixers located at the top and bottom of the bivalirudin solution” and “added ... the bivalirudin solution either all at once, or rapidly in multiple portions,” “the batches of Example 5 were prepared by a different protocol” in which “the pH-adjusting solution was added to the bivalirudin solution at a controlled rate of 2L/min using a peristaltic pump,” and that “[a] homogenizer was used to provide a high shear mixing
We conclude that one of ordinary skill in the art would rely on Example 5 to ascertain the metes and bounds of “efficiently mixing.” As the only embodiment of efficient mixing, Example 5 is “highly indicative of the scope of the claims.” Johns Hopkins Univ. v. CellPro, Inc., 152 F.3d 1342, 1355 (Fed. Cir. 1998). Example 5, however, is not merely the only disclosed embodiment of efficient mixing—it is the only description of efficient mixing in the patents in suit that casts light on what efficient mixing is and that enables one of ordinary skill in the art to achieve the objects of the claimed invention. Although the specification provides that Example 5 is “non-limiting,” e.g., ‘727 patent, col. 16 l. 6, no other part of the patents’ written description sufficiently teaches the affirmative steps that constitute efficient mixing. In this circumstance, we think it entirely appropriate to limit the term “efficiently mixing” to the sole portion of the specification that adequately discloses “efficient mixing” to the public. See Alloc, Inc. v. ITC, 342 F.3d 1361, 1370 (Fed. Cir. 2003); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1344-45 (Fed. Cir. 2001).
When held against the detailed description‘s open-ended and vague teachings regarding “efficient mixing,” Example 5 provides a clear “objective standard by which to measure the scope of the term.” Sonix Tech. Co. v. Publications Int‘l, Ltd., 844 F.3d 1370, 1375 (Fed. Cir. 2017).8 Accordingly, construing “efficiently mixing” to incorporate the efficient mixing conditions of Example 5 is necessary to “tether the claims to what the specification[] indicate[s] the inventor actually invented.” Retractable Techs., Inc. v. Becton, Dickinson & Co., 653 F.3d 1296, 1305 (Fed. Cir. 2011). In doing so, we adopt “[t]he construction that stays true to the claim language and most naturally aligns with the patent‘s description of the invention ... [which] in the end, [is] the correct construction.” Phillips, 415 F.3d at 1312.9
We therefore construe the “efficient mixing” required by the patents in suit to requirе using the efficient mixing conditions of Example 5.
III
The net effect of our claim construction is that to infringe either the ‘727 patent or the ‘343 patent, infringing batches must be compounded using a process that employs the efficient mixing conditions of Example 5. See Abbott Labs. v. Sandoz, Inc., 566 F.3d 1282, 1291-95 (Fed. Cir. 2009) (en banc). Under this claim construction, Mylan‘s ANDA does not infringe the asserted claims since is undisputed that, for example, Mylan does not use multiple mixing devices as required by Example 5.
For completeness, we note the inapplicability under our claim construction of the district court‘s holding under Sunovion. The district court relied on the fact that Mylan‘s ANDA specifies an Asp9 level of
This holding rests on an incorrect claim construction of the ‘727 patent that does not require “efficient mixing.”10 See id. at 887. Under the correct claim construction, Sunovion is inapplicable because that decision “only applies when an ANDA specification defines a compound such that it meets the limitations of an asserted claim.” Ferring B.V. v. Watson Labs., Inc.-Fla., 764 F.3d 1382, 1387 (Fed. Cir. 2014) (internal quotation marks omitted). Mylan‘s ANDA does not on its face establish that Mylan‘s compounding process uses efficient mixing since, for example, nothing in the ANDA speaks to whether Mylan uses high-shear mixing as required by Example 5.
Instead, “[w]hen an ANDA is silent with respect to infringement ... the correct analysis is ... [whether] the ANDA applicant would likely sell an infringing composition рursuant to an approved ANDA.” Id. at 1387-88 (internal quotation marks omitted) (quoting Glaxo, Inc. v. Novopharm, Ltd., 110 F.3d 1562, 1570 (Fed. Cir. 1997)). In this case, the undisputed facts before the district court on summary judgment foreclose the possibility that Mylan “would likely sell an infringing” product. There is no genuine dispute that Mylan‘s compounding process “adds the pH-adjusting solution all at once” and “uses one paddle mixer” operating at 200 rpm. Medicines, 2013 WL 6633085, at *10 (internal quotation marks omitted). Example 5, however, requires multiple mixers and adds the pH-adjusting solution at a continuous rate using a peristaltic pump. See ‘727 patent, col. 22 ll. 46-64; ‘343 patent, col. 23 ll. 21-36. Accordingly, Mylan‘s ANDA cannot infringe the asserted claims of the ‘727 patent and the ‘343 patent.11
CONCLUSION
We reverse the district court‘s judgment of infringement with respect to the ‘727 patent and affirm the court‘s summary judgment of noninfringement with respect to the ‘343 patent. Accordingly, the judgment of the district court is
REVERSED IN PART AND AFFIRMED IN PART
Amanda E. BECKER, Petitiоner v. OFFICE OF PERSONNEL MANAGEMENT, Respondent
2016-1365
United States Court of Appeals, Federal Circuit.
Decided: April 7, 2017