Wash. Admin. Code § 16-675-055
The fees in the following table apply to inspecting and testing weighing or measuring devices when the inspection or test is:
(2) Performed on devices used by an agency or institution that receives money from the legislature or the federal government.
| Weighing and Measuring Device | Inspection and/or Testing Fee |
| Small scales "zero to 400 pounds capacity" | $16.80 per scale |
| Intermediate scales "400 pounds to 5,000 pounds capacity" | $56.10 per scale |
| Large scales "over 5,000 pounds capacity" | $140.30 per scale |
| Large scales with supplemental devices | $168.40 per scale |
| Railroad track scales | $1,123.00 per scale |
| Liquid fuel meters with flows of less than 20 gallons per minute | $16.80 per meter |
| Liquid fuel meters with flows of at least 20 but not more than 150 gallons per minute | $56.10 per meter |
| Fuel meters with flows over 150 gallons per minute | $168.40 per meter |
| Liquid petroleum gas meters with one-inch diameter or smaller dispensers | $56.10 per meter |
| Liquid petroleum gas meters with greater than one-inch diameter dispensers | $168.40 per meter |
| Inspection services not covered by the above special inspection fees | $37.80 per hour for labor and travel time(minimum one hour charge) |
[Statutory Authority: RCW 19.94.010 and 43.01.160. WSR 24-22-045, s 16-675-055, filed 10/28/24, effective 11/28/24. Statutory Authority: Chapters 19.94 and 34.05 RCW. WSR 07-13-051, § 16-675-055, filed 6/14/07, effective 7/15/07; WSR 04-23-043, § 16-675-055, filed 11/10/04, effective 12/11/04.]