- (a) Every vehicle inspection station, except fleet and governmental vehicle inspection stations, are required to display the vehicle inspection station sign.
- (b) The sign and replacements are provided by the state at no cost to the vehicle inspection station and shall always remain the property of the department as a means of identification of the vehicle inspection station.
- (c) The department will issue only one sign per public vehicle inspection station certificate of appointment issued. Dissimilar signs may be displayed.
- (d) Signs shall be displayed from the vehicle inspection station building so that the sign is clearly visible.
- (e) Signs shall be solidly mounted on the wall or framework of the vehicle inspection station in a location designated by the department.
- (f) When the material on the building wall or framework permits, screws shall be utilized to attach the sign to the wall; otherwise, adhesive tape will be used.
- (g) The sign may be displayed at or near the service entrance or inspection area entrance to the building. The sign will cover no part of any other sign or advertisement nor will any other sign or advertisement cover any portion of the vehicle inspection station sign.
- (h) The sign shall not be altered in any manner.
- (i) Failure to display the vehicle inspection station sign is grounds for inspection station suspension. The sign shall be surrendered upon demand of the department.
Source Note:The provisions of this §23.11 adopted to be effective July 3, 1995, 20 TexReg 4409.