Upon completion of the aquifer storage well, the following information shall be obtained during the first phase of the project and submitted along with the application for final authorization:

1. (1) as-built drilling and completion data on the well;
2. (2) all logging and testing data on the well;
3. (3) formation fluid analyses;
4. (4) injection fluid analyses;
5. (5) injectivity and pumping tests determining well capacity and reservoir characteristics;
6. (6) hydrogeologic modeling, with supporting data, predicting mixing zone characteristics and injection fluid movement and quality; and
7. (7) other information as determined by the executive director as necessary for the protection of underground sources of drinking water.

Source Note:The provisions of this §331.186 adopted to be effective June 28, 1996, 21 TexReg 5443.