1. (a) The following shall be included in an application for an injection well permit:

   1. (1) for Class I wells, as defined in Chapter 331 of this title (relating to Underground Injection Control), the information listed in §331.121 of this title (relating to Class I Wells);
   2. (2) for Class III wells, as defined in Chapter 331 of this title (relating to Underground Injection Control), the information listed in §331.122 of this title (relating to Class III wells);
   3. (3) the manner in which compliance with the financial assurance requirements of Chapter 37 of this title (relating to Financial Assurance) will be attained;
   4. (4) the manner in which compliance with the plugging and abandonment requirements of §331.46 of this title (relating to Plugging and Abandonment Standards) will be attained;
   5. (5) the manner in which compliance with the corrective action requirements of §331.44 of this title (relating to Corrective Action Standards) will be attained;
   6. (6) the manner in which compliance with the post-closure requirements of §331.68 of this title (relating to Post-Closure Care) will be attained;
   7. (7) a letter from the Railroad Commission of Texas stating that the drilling of a disposal well and the injection of the waste into the subsurface stratum selected for disposal will not endanger or injure any oil or gas formation;
   8. (8) for Class III wells, a description of all liquid and solid nonradioactive wastes resulting from mining activities;
   9. (9) a complete delineation of any aquifer or portion of an aquifer for which exempt status is sought; and
   10. (10) any other information reasonably required by the executive director to evaluate the proposed injection well or project, including, but not limited to, the information set forth in the Texas Water Code, §27.051(a).

2. (b) An application for production area authorization shall be submitted with and contain the following for each production area:

   1. (1) mine plan;
   2. (2) a restoration table;
   3. (3) a baseline water quality table;
   4. (4) control parameter upper limits;
   5. (5) monitor well locations; and
   6. (6) other information reasonably required by the executive director to evaluate the application.
3. (c) An application under this section shall comply with the requirements of §305.50(4)(B) of this title (relating to Additional Requirements for an Application for a Solid Waste Permit.

Source Note:The provisions of this §305.49 adopted to be effective June 19, 1986, 11 TexReg 2593; amended to be effective January 5, 1988, 12 TexReg 4860; amended to be effective July 5, 1989, 14 TexReg 3046; amended to be effective November 7, 1991, 16 TexReg 6051; amended to be effective March 21, 2000, 25 TexReg 2368.