- (a) An owner or operator may certify and register the maximum emission rates from facilities permitted by rule under this chapter in order to establish enforceable allowable emission rates which are below the emission limitations in §106.4 of this title (relating to Requirements for Permitting by Rule).
- (b) All representations with regard to construction plans, operating procedures, and maximum emission rates in any certified registration under this section become conditions upon which the facility permitted by rule shall be constructed and operated.
- (c) It shall be unlawful for any person to vary from such representation if the change will cause a change in the method of control of emissions, the character of the emissions, or will result in an increase in the discharge of the various emissions, unless the certified registration is first revised.
- (d) The certified registration must include documentation of the basis of emission estimates and a written statement by the registrant certifying that the maximum emission rates listed on the registration reflect the reasonably anticipated maximums for operation of the facility.
- (e) The certified registration shall be maintained on-site and be provided immediately upon request by representatives of the commission or any air pollution control agency having jurisdiction. If the plant site is unmanned, the regional manager may authorize an alternative site to maintain this documentation. Copies of the certified registration shall be included in applications for permits subject to review under the divisions in Chapter 116, Subchapter B of this title (relating to New Source Review Permits).
Source Note:The provisions of this §106.6 adopted to be effective November 15, 1996, 21 TexReg 10881; amended to be effective September 4, 2000, 25 TexReg 8653.