1. (a) Each fire alarm system or modification to an existing system must be planned by a person holding a fire alarm planning superintendent license or a Texas registered professional engineer.
2. (b) Plans showing details of system wiring, control panel terminal identification, and device location, with functional information and instructions on system operation, must be provided to the building owner or his representative. Subsequent modifications, additions, or alterations must be legibly noted on updated plans and provided to the owner or his representative.
3. (c) At least one plan copy must bear the name, original signature, business phone number, and license number of the licensed fire alarm planning superintendent or a Texas registered professional engineer, the completion date, name, address, and certificate number of the registered firm.
4. (d) A rubber stamp may be used by a licensed fire alarm planning superintendent to supply the information required by subsection (c) of this section, except that a stamped signature is prohibited. If a rubber stamp is used, it must produce an imprint at least two inches wide by one inch high, all in bold type and capital letters, and in the following format:
5. (e) Fire alarm plans, manuals, and documents shall not be stored inside fire alarm panels.

Source Note:The provisions of this §34.619 adopted to be effective February 27, 1995, 20 TexReg 1021; transferred effective September 1, 1997, as published in the Texas Register November 14, 1997, 22 TexReg 11091.