28 Tex. Admin. Code § 34.519
(a) After an installation has been completed, an installation label must be affixed to the control head or panel of the fixed fire extinguisher system. The signature of the licensee on the label certifies that the system has been installed according to law. Labels must be five inches in height and four inches in width and must be of the gum label type. They must not be red in color. Installation labels must contain only the following information in the format of the label shown in subsection (b) of this section:
(d) After completion of the installation, modification, or addition of a fixed fire extinguisher system, the licensee must complete an installation certificate in the format provided by the state fire marshal (see Certificate of Installation). When an installation certificate has been completed, legible copies must be distributed as follows:
Source Note:The provisions of this §34.519 adopted to be effective April 14, 1989, 14 TexReg 1632; transferred effective September 1, 1991, as published in the Texas Register March 6, 1992, 17 TexReg 1745; amended to be effective March 23, 1994, 19 TexReg 1682; amended to be effective December 14, 1994, 19 TexReg 9526; amended to be effective May 10, 1996, 21 TexReg 3714; transferred effective September 1, 1997, as published in the Texas Register November 14, 1997, 22 TexReg 11091; amended to be effective April 1, 2006, 31 TexReg 1706; amended to be effective February 14, 2013, 38 TexReg 662.