1. (a) The manufacturer shall provide the industrialized builder, or a person who has obtained an installation permit in accordance with §70.20, with the following information:

   1. (1) the name, Texas registration number, and address of the manufacturer of the building;
   2. (2) the location of the decal(s) or insignia on the modules or modular components;
   3. (3) a description of the location of the data plate and explanation of the information thereon;
   4. (4) a set of approved plans, in accordance with §70.70, as necessary to obtain a building permit and as necessary to complete construction of the house or building at the installation site. The documents shall include critical load points for attachment of the house or building to the foundation;
   5. (5) the floor plan of the building and schematic drawings of the plumbing, electrical, and heating/ventilation systems for the owner of the building;
   6. (6) a completed signed copy of the energy compliance checklist (reference subsection (c)(8)(C) of §70.70; and
   7. (7) the information required by §70.78(b).

2. (b) The industrialized builder shall provide the purchaser (owner) or installation permit holder of any industrialized house or building the following information:

   1. (1) the name, Texas registration number, and address of the manufacturer and industrialized builder;
   2. (2) a description of the location of the data plate and explanation of the information thereon;
   3. (3) the floor plan of the building and schematic drawings of the plumbing, electrical, and heating/ventilation systems;
   4. (4) a complete set of approved plans and specifications in accordance with §70.70, including all records pertinent to alterations of the house or building in accordance with §70.74;
   5. (5) a copy of the foundation system design and any unique on-site details in accordance with §70.70;
   6. (6) the location of the decal(s) or insignia on the module or modular components;
   7. (7) a site plan showing the on-site location of all utilities and utility taps;
   8. (8) a completed signed copy of the energy compliance checklist (reference subsection (a)(6) of this section); and
   9. (9) the information required by §70.78(b).
3. (c) The manufacturer must have written proof that the information in subsection (a) of this section was delivered to the industrialized builder or installation permit holder and keep this proof in the manufacturer's files for a minimum of five years.
4. (d) The builder must have written proof that the information in subsection (b) of this section was delivered to the purchaser (owner) or installation permit holder and keep this proof in the industrialized builder's files for a minimum of five years.

Source Note:The provisions of this §70.75 adopted to be effective April 13, 1990, 15 TexReg 1787; amended to be effective August 1, 1996, 21 TexReg 6619; amended to be effective March 16, 1998, 23 TexReg 1305; amended to be effective August 14, 2002, 27 TexReg 7103; amended to be effective May 17, 2004, 29 TexReg 4867; amended to be effective June 1, 2006, 31 TexReg 4420.