1. (a) Each boiler must be identified with a single unique department-issued identification number displayed on a tag and located on the boiler next to the ASME name plate. The decal shall remain on the boiler for the life of the equipment.
2. (b) After the initial issuance of a tag number, that tag number may not be reassigned or reused.
3. (c) All correspondence and inspection reports must reference the boiler identification tag number.
4. (d) On request by the department, the inspector must report to the department regarding the issuance and disposal of all tags issued to the inspector.

Source Note:The provisions of this §65.70 adopted to be effective June 15, 2015, 40 TexReg 3121.