- (a) In addition to the requirements of NFPA 54, Part 3, Gas Piping Installation, LP-gas piping shall be installed, altered, repaired, pressure tested, and leakage tested only by persons properly licensed or certified by the Commission.
(b) Upon completion of the installation, alteration, repair, or pressure testing of an LP-gas piping system, the licensee shall attach to the end of the piping nearest the container a decal or tag of metal or other permanent material indicating the following information:
- (1) the licensee's name;
- (2) the LP-gas license number; and
- (3) the year the piping was installed, altered, repaired, or pressure tested.
- (c) A single identification decal or tag may be used to satisfy the requirements in §§9.141, 9.206, and 9.307 of this title (relating to Uniform Safety Requirements, Vehicle Identification Labels, and Identification of Converted Appliances, respectively) provided the decal or tag meets all the requirements of those sections.
- (d) Licensees are not required to place a decal or tag following the performance of a leakage test on an LP-gas piping system. Licensees shall retain documentation of all leakage tests and shall make that documentation available for Commission inspection upon request.
Source Note:The provisions of this §9.308 adopted to be effective February 1, 2001, 26 TexReg 947; amended to be effective September 1, 2005, 30 TexReg 4810.