- (a) Fuel lines shall be supported at least every 21 to 27 inches.
- (b) Joint compound or tape acceptable for use with LNG shall be applied to all male pipe threads prior to assembly.
- (c) Piping and fittings shall be clean and free from cutting or threading burrs and scaling. The ends of all piping shall be reamed.
- (d) Bends in piping or tubing are prohibited if the bend weakens the pipe or tubing. Bends shall be made by bending tools designated for this purpose.
- (e) Joints or connections shall be located only in an accessible location.
Source Note:The provisions of this §14.2619 adopted to be effective May 26, 2003, 28 TexReg 4100; amended to be effective February 15, 2021, 46 TexReg 1044.