20 : 10 : 39 : 25 . Pre-test documentation. All pre-test calibration requirements required by §§ 20:10:39:11, 20:10:39:12, and 20:10:39:13 shall be completed and documented. A drawing of the dairy shall be prepared by the qualified testing professional indicating:

1. (1) The location of the buildings;
2. (2) Secondary electrical service panels and secondary feeder systems serving cow contact areas;
3. (3) Transformers and central distribution point;
4. (4) Existing grounding electrodes, if known;
5. (5) The location of all cow contact points to be tested;
6. (6) All remote reference electrodes; and

7. (7) All primary and secondary neutral test points used in conjunction with the remote reference electrodes.

   A list of planned test points shall be prepared by the qualified testing professional using the applicable form before beginning each test. Each test point shall be listed separately and a specific reference number is given to each planned test point.

Source: 42 SDR 174 , effective June 21, 2016 .

General Authority: SDCL 49 - 47 - 2.

Law Implemented: SDCL 49-47-2 , 49-47-3 .