(A) A "Fire Protection Sprinkler System Specification Sheet" must be completed for every fire protection sprinkler system, and submitted on a form approved by the State Fire Marshal's Office to the authority having jurisdiction. The completed form must contain the following information at a minimum:

1. (1) the available static and residual water pressure from a flow test conducted less than one year before submittal;
2. (2) the volume per minute of the available water flow and duration;
3. (3) the source of water supply;
4. (4) the NFPA hazard classifications and details of storage arrangement, if applicable;
5. (5) the occupancy use of the building, or the area to be sprinkled;
6. (6) the type of system to be installed;
7. (7) the applicable National Fire Protection Association standards to be followed for each component of the system;
8. (8) other state and local statutes, regulations, codes, or ordinances that must be followed;
9. (9) the name, address, title, and phone number of the person developing the fire sprinkler system specification sheet.

(B) The form must be completed by:

1. (1) a professional engineer licensed in this State bearing his professional seal and signature; or
2. (2) a fire sprinkler contractor licensed in this State with a qualifying party holding a NICET Level IV Technician Certification in "Fire Protection Engineering Technology Automatic Sprinkler System Layout" if a specific statute, regulation, or ordinance does not require the services of a licensed professional engineer. The qualifying party must be the individual completing the form, and he must place his name on the lower right hand corner on the first page of the form with the words "Qualifying Party" after his name and with his qualifying party certificate number.