(A) As used in this section:

1. (1) "Manufacturing occupation" means employment that consists of the mechanical, physical, or chemical transformation of materials, substances, or components into new products for sale, including the assembling of component parts into a finished product.
2. (2) Notwithstanding the definition of "employer" in section 4109.01 of the Revised Code, "employer" means every person who employs any individual in a manufacturing occupation.

(B) There is hereby created the manufacturing mentorship program to expose minors who are sixteen or seventeen years of age to manufacturing occupations in this state through temporary employment with an employer. An employer employing a minor under the mentorship program shall do all of the following:

1. (1) Determine the duration of the minor's employment;
2. (2) Assign the minor a mentor to provide direct and close supervision while the minor is engaged in any workplace activity;
3. (3) Provide the minor with the training described in division (C) of this section;
4. (4) Encourage the minor to participate in a career-technical education program approved by the department of education if the minor is not participating in a career-technical education program when the minor begins employment;
5. (5) Comply with all applicable state and federal laws and regulations relating to the employment of minors.

(C)

1. (1) An employer employing a minor who is sixteen or seventeen years of age in a manufacturing occupation under the mentorship program shall provide the minor with training that includes all of the following:

   1. (a) A ten-hour course in general industry safety and health hazard recognition and prevention approved by the occupational safety and health administration of the United States department of labor;
   2. (b) Instructions on how to operate the specific tools the minor will use during the minor's employment;
   3. (c) The general safety and health hazards to which the minor may be exposed at the minor's workplace;
   4. (d) The value of safety and management commitment;
   5. (e) Information on the employer's drug testing policy.
2. (2) For purposes of division (C)(1)(a) of this section, a minor may participate in a thirty-hour course in general industry safety and health hazard recognition and prevention approved by the occupational safety and health administration if the minor has already successfully completed a ten-hour course.
3. (3) The employer shall pay any costs associated with providing the training required by division (C)(1) or permitted under division (C)(2) of this section.
4. (4) An employer is not required to provide the training described in division (C)(1) or (2) of this section if the minor presents proof of completing the training during the six-month period immediately before beginning employment with the employer.

(F) No employer shall do either of the following:

1. (1) Permit a minor who is sixteen or seventeen years of age to operate a tool minors of that age are permitted to operate pursuant to the rules adopted under division (D) of this section unless the minor is employed by the employer under the mentorship program;
2. (2) Permit a minor who is sixteen or seventeen years of age who is employed by the employer under the mentorship program to operate a tool prohibited for use by minors of that age pursuant to the "Fair Labor Standards Act of 1938," 29 U.S.C. 201, et seq., and section 4109.05 of the Revised Code or rules adopted under that section.