PURPOSE: This rule provides definitions used throughout this chapter.

1. (1) Unless otherwise specified, in addition to the definitions provided for in this rule, the definitions in 23 U.S.C. 101(a) are applicable to this chapter whether or not specifically restated, or revised herein, and in their unrevised form to the extent not in conflict with this chapter.
2. (2) Adjusted low bid means a form of best value selection in which qualitative aspects are scored on a numerical scale expressed as a decimal; price is then divided by qualitative score to yield an “adjusted bid” or “price per quality point.” Award is made to proposer with the lowest adjusted bid.
3. (3) Alternate technical concept (ATC) means alternative concepts to the technical design requirements in the Request for Proposal
4. (RFP) that are equal or better in quality or effect as determined by the contracting agency in its sole discretion and which have successfully been used elsewhere under comparable circumstances. A concept is not an ATC if it merely seeks to reduce quantities, performance, or reliability, or seeks a relaxation of the contract requirements.
5. (4) Best value selection means any selection process in which proposals contain both price and qualitative components and award is based upon a combination of price and qualitative considerations.
6. (5) Clarifications means a written or oral exchange of information that takes place after the receipt of proposals when award without discussions is contemplated. The purpose of clarifications is to address minor or clerical revisions in a proposal.
7. (6) Commission means the Missouri Highways and Transportation Commission.
8. (7) Communications are exchanges, between the contracting agency and proposers, after receipt of proposals, which lead to the establishment of the competitive range.
9. (8) Competitive acquisition means an acquisition process that is designed to foster an impartial and comprehensive evaluation of proposers’ proposals, leading to the selection of the proposal representing the best value to the contracting agency.
10. (9) Competitive range means a list of the most highly rated proposals based on the initial proposal rankings. It is based on the rating of each proposal against all evaluation criteria.

11. (10) Construction means the supervising, inspecting, actual building, and incurrence of all costs incidental to the construction or reconstruction of a highway, including bond costs and other costs relating to the issuance of bonds whether in accordance with 23 U.S.C. section 122 or other debt financing instruments and costs incurred by the state in performing project related audits that directly benefit the state highway program. Such term includes:

    1. (A) Locating, surveying, and mapping (including the establishment of temporary and permanent geodetic markers in accordance with specifications of the National Oceanic and Atmospheric Administration of the Department of Commerce);
    2. (B) Resurfacing, restoration, and rehabilitation;
    3. (C) Acquisition of rights-of-way;
    4. (D) Relocation assistance, acquisition of replacement housing sites, and acquisition and rehabilitation, relocation, and construction of replacement housing;
    5. (E) Elimination of hazards of railway grade crossings;
    6. (F) Elimination of roadside obstacles;
    7. (G) Improvements that directly facilitate and control traffic flow, such as grade separation of intersections, widening of lanes, channelization of traffic, traffic control systems, and passenger loading and unloading areas; and
    8. (H) Capital improvements that directly facilitate an effective vehicle weight enforcement program, such as scales (fixed and portable), scale pits, scale installation, and scale houses.
12. (11) Contracting agency means the public agency awarding and administering a designbuild contract. The contracting agency may be the commission, MoDOT or another state or local public agency.
13. (12) Deficiency means a material failure of a proposal to meet a contracting agency requirement or a combination of significant weaknesses in a proposal that increases the 7 CSR 10-24

risk of unsuccessful contract performance to an unacceptable level.

1. (13) Design-build contract means an agreement that provides for design and construction of improvements by a contractor or private developer.
2. (14) Design-builder means an individual, corporation, partnership, joint venture, limited liability company, limited liability partnership or other entity making a proposal to be contractually responsible to perform, or which is performing, the project design and construction under a design-build contract.
3. (15) Disadvantaged business enterprise

4. (DBE) means a for-profit small business concern—

   1. (A) That is at least fifty-one percent (51%) owned by one or more individuals who are both socially and economically disadvantaged or, in the case of a corporation or other business entity, in which fifty-one percent (51%) of the stock or shares are owned by one or more socially and economically disadvantaged individuals; and
   2. (B) Whose management and daily business operations are controlled by one or more of those socially and economically disadvantaged individuals who own the disadvantaged business enterprise.
5. (16) Discussions mean written or oral exchanges that take place after the establishment of the competitive range with the intent of allowing the proposers to revise their proposals.
6. (17) Division administrator means the division administrator, Missouri Division of the Federal Highway Administration, United States Department of Transportation (FHWA).
7. (18) Fixed price/best design means a form of best value selection in which contract price is established by the contracting agency and stated in the Request for Proposals document. Design solutions and other qualitative factors are evaluated and rated, with award going to the firm offering the best qualitative proposal for the established price.

8. (19) Highway includes:

   1. (A) A road, street, and parkway;
   2. (B) A right-of-way, bridge, railroad-highway crossing, tunnel, drainage structure, sign, guardrail, and protective structure, in connection with a highway; and
   3. (C) A portion of any interstate bridge or tunnel and the approaches thereto, the cost of which is assumed by the commission.
9. (20) Intelligent Transportation System (ITS) services means services which provide for the acquisition of technologies or systems of technologies (e.g., computer hardware or software, traffic control devices, communications link, fare payment system, automatic vehicle location system, etc.) that provide or contribute to the provision of one or more ITS user services as defined in the National ITS Architecture.
10. (21) Interstate system means the Dwight D. Eisenhower National System of Interstate and Defense Highways described in 23 U.S.C. section 103(c).
11. (22) Modified design-build means a variation of design-build in which the contracting agency furnishes offerors with partially complete plans. The design-builders role is generally limited to the completion of the design and construction of the project.
12. (23) National Highway System (NHS) means the federal-aid highway system described in 23 U.S.C. section 103(b).
13. (24) Non-qualified project means a designbuild project that does not meet the definition of a qualified project in 23 U.S.C. 112(b)(3)(C).
14. (25) Organizational conflict of interest means that because of other activities or relationships with other persons, a person is unable or potentially unable to render impartial assistance or advice to the contracting agency, or the person’s objectivity in performing the contract work is or might be otherwise impaired, or a person has an unfair competitive advantage.
15. (26) Prequalification means the contracting agency’s process for determining whether a firm is fundamentally qualified to compete for a certain project or class of projects. The prequalification process may be based on financial, management and other types of qualitative data. Prequalification should be distinguished from short listing.
16. (27) Price proposal means the price submitted by the offeror to provide the required design and construction services.
17. (28) Project manager means the person designated by the contracting agency whose specific authority will be set forth in the contract documents.
18. (29) Proposal modification means a change made to a proposal before the solicitation closing date and time, or made in response to an amendment, or made to correct a mistake at any time before award.
19. (30) Proposal revision means a change to a proposal made after the solicitation closing date, at the request of or as allowed by a contracting agency, as the result of negotiations.
20. (31) Project agreement means the formal instrument to be executed by the commission and the secretary as required by 23 U.S.C. section 106.
21. (32) Qualified project means any designbuild project with a total estimated cost greater than fifty (50) million dollars or an intelligent transportation system project greater than five (5) million dollars as described in 23 U.S.C. 112(b)(3)(C).
22. (33) Request for Proposal (RFP) means a document that describes the procurement process, forms the basis for the final proposals and may potentially become an element in the contract. In any design-build contract, whether involving state or federal funds, the contracting agency shall require that each entity submitting a request for qualifications provide a detailed DBE participation plan. The plan shall provide information describing the experience of the entity in meeting DBE participation goals, how the entity will meet the DBE goal design-build project and such other qualifications that the commission considers to be in the best interest of the state.
23. (34) Request for Qualification (RFQ) means a document issued by the contracting agency describing the project in enough detail to let potential proposers determine if they wish to compete and forms the basis for requesting qualifications submissions from which the most highly qualified proposers can be identified.
24. (35) Secretary means the Secretary of Transportation of the United States Department of Transportation.
25. (36) Short listing means the narrowing of the field of offerors through the selection of the most qualified proposers who have responded to an RFQ.
26. (37) Solicitation means a public notification of a contracting agency’s need for informa- Transportation Commission

tion, qualifications, or proposals related to identified services.

1. (38) Standard design-build means a procurement process in which the first phase consists of short listing (based on qualifications submitted in response to an RFQ) and the second phase consists of the submission of price and technical proposals in response to an RFP.
2. (39) State means the state of Missouri, MoDOT or commission.
3. (40) State funds means funds raised under the authority of the state or any political or other subdivision thereof, and made available for expenditure under direct control of the commission or MoDOT.
4. (41) Stipend means a monetary amount paid to unsuccessful proposers.
5. (42) Technical proposal means that portion of a design-build proposal that contains design solutions and other qualitative factors that are provided in response to the RFP document.
6. (43) Tradeoff means an analysis technique involving a comparison of price and nonprice factors to determine the best value when considering the selection of other than the lowest priced proposal.
7. (44) Transportation corporation means any transportation corporation organized under sections 238.300 to 238.367, RSMo.
8. (45) Transportation development district means a transportation development district organized under sections 238.200 to 238.275, RSMo.
9. (46) Weakness means a flaw in the proposal that increases the risk of unsuccessful contract performance. A significant weakness in the proposal is a flaw that appreciably increases the risk of unsuccessful contract performance.
10. (47) Weighted criteria process means a form of best value selection in which maximum point values are pre-established for qualitative and price components, and award is based upon high total points earned by the proposers.

AUTHORITY: sections 226.020, RSMo 2000 and 226.030 and 227.107, RSMo Supp. 2004.* Original rule filed Aug. 15, 2005, effective Feb. 28, 2006. *Original authority: 226.020, RSMo 1939; 226.030, RSMo 1939, amended 1965, 2003, 2004; and 227.107, RSMo 2002.