Mo. Code Regs. Ann. tit. 2, § 90-23.010
PURPOSE: This rule updates inspection procedures of prepacked commodities and merchandise. Editor’s Note: The secretary of state has determined that the publication of this rule in its entirety would be unduly cumbersome or expensiue. The entire text of the material referenced has been filed with the secretary of state. This material may be found at the Office of the Secretary ofState or at the headquarters oftheageneyandisauailable to any interested person at a cost established by state law. SUMMARY: NBS Handbook 133 provides procedures to test (by using statistical hampling techniques) individual lots of packages for conformance with legal requirements. Anything that is put into a container, wrapped, or banded and labeled as to quantity may be inspected. The labeled quantity may be of weight, volume, linear, square or cubic measure, count or combination. The examination of packaged commodities may be to determine conformance with federal, state or local net contents labeling regulations. Most often, compliance testing of packaged goods is carried out to protect the consumer/purchaser against buying packages with less in them than the labeled quantity and to advise the manufacturer to improve delivered product quantities when necessary. Inspection for compliance with other labeling requirements (such as size of lettering or units of measurement) also may accompany package quantity compliance testing, but is not covered in this document.
Handbook 133 be deemed unacceptable, rules will be promulgated within this chapter denoting and excepting those portions and adopting alternative provisions a.8 deemed necessary by the director of the Department of AgKiCultUE Auth: section 413.065, RSMo (1966).’ Originalruk filed Sept. 14,1981, effective Dec. 15,1981. *Original authority 19.33.