Note: This version of section effective until 7-1-2027. See also following version of this section, effective 7-1-2027.
(b) The rules required under this section must, at a minimum, provide the following:
(1) The adoption by reference of:
- (A) ASTM F 698 (1994 edition) ("Specification for Physical Information to be Provided to Amusement Rides and Devices");
- (B) ASTM F 770 (1993 edition) ("Practice for Operation Procedures for Amusement Rides and Devices");
- (C) ASTM F 846 (1992 edition) ("Guide for Testing Performance of Amusement Rides and Devices");
- (D) ASTM F 853 (1993 edition) ("Practice for Maintenance Procedures for Amusement Rides and Devices");
- (E) ASTM F 893 (1987 edition) ("Guide for Inspection of Amusement Rides and Devices");
- (F) ASTM F 1305 (1994 edition) ("Standard Guides for the Classification of Amusement Ride and Device Related Injuries and Illnesses"); or
- (G) any subsequent published editions of the ASTM standards described in clauses (A) through (F).
(2) A requirement that inspectors employed or contracted by the department:
(A) have and maintain at least:
- (i) a Level 1 certification from the National Association of Amusement Ride Safety Officials or an equivalent organization approved by the commission; or
- (ii) an equivalent certification under a process or system approved by the commission; and
- (B) conduct inspections that conform to the rules of the commission.
- (3) A requirement that regulated amusement devices be operated and maintained in accordance with the rules of the commission.
- (4) The commission's chief inspector or supervisor of regulated amusement device inspectors must have and maintain a Level I certification.
Sec. 4. (a) The commission shall adopt rules under IC 4-22-2 to define appropriate training for a person who inspects regulated amusement devices.
As added by P.L.166-1997, SEC.8. Amended by P.L.141-2003, SEC.22; P.L.1-2006, SEC.404; P.L.68-2009, SEC.6; P.L.187-2021, SEC.124.