Fla. Admin. Code R. 62B-56.050
(3) The applicant shall provide the specific information set forth below:
(g) Information concerning impacts to natural plant communities and nesting state or federally threatened or endangered species, including:
1. A biological assessment of habitat quality of natural plant communities and potential nesting state or federally threatened or endangered species whose range includes the subject property, using Form 62B-56.900(4), entitled “Biological Assessment” (effective 6-22-09), which is incorporated by reference. Copies of forms may be obtained by writing to the Department of Environmental Protection, Bureau of Beaches and Coastal Systems, MS 300, 3900 Commonwealth Blvd., Tallahassee, FL 32399-3000; or at the following website: www.dep.state.fl.us/beaches.
2. Any existing Incidental Take Permit from the U.S. Fish and Wildlife Service.
(j) A dimensioned site plan. The drawings shall be signed and sealed by a professional engineer licensed in the State of Florida. The site plan shall include:
1. The locations and exterior dimensions of the reconstructed dune, including the location of the dune core and all activities, and the perpendicular distances from the Coastal Construction Control Line (CCCL) to the seaward limits of the dune core, the dune toes and the reconstructed dune.
2. Dimensions and locations of the foundation outlines of any existing structures on adjacent properties and distances from the CCCL to the seaward corners of the foundations of any existing structures and the seaward limit of any coastal or shore-protection structure.
3. Dimensions and locations of the foundation outlines of any existing structures on the subject property and distances from the CCCL to the seaward corners of the foundations of any major structures, public infrastructure and the seaward limit of any coastal or shore-protection structure.
4. The horizontal location of the erosion control line (if one exists), any contour lines corresponding to elevation 0.00, the approximate contour of mean high water and seasonal high water, and horizontal location of the seaward line of vegetation and outlines of existing native beach-dune vegetation.
5. The horizontal location of the CCCL for the full width of the subject property, including the location and full stamping of the two nearest Department or published second order or higher horizontal control points.
6. The location of the two nearest Department Range Monuments (DNR R-Monument).
7. The location and dimensions of the property boundary, rights of way, and easements, if any.
8. The property owner and project name, street address, scale, north arrow, sheet number, and date of drawings; and,
9. The location of work limits, construction fences, and dune features and vegetation to be protected during construction.
(k) A dimensioned grading plan including any dune and vegetation protection, clearing, demolition, grading, excavation, and fill activities. The drawings shall be signed and sealed by a professional engineer licensed in the State of Florida. The grading plan shall include the location and distances of all proposed structures on the subject and adjacent properties, and the following:
1. Existing and proposed elevations, contours and spot elevations, including the mean high water line, seasonal high water line, vegetation, seaward toe of dune, dune crest, and landward toe of dune.
2. Volumes (in cubic yards), locations and dimensions and distances (in feet) seaward of the CCCL for all permanent and temporary excavation, storage or fill and other site use or disturbance including construction limits and access.
3. A table of all permanent, temporary, and net excavation and fill volumes seaward of the CCCL.
4. Soil and geotechnical data for beach compatible imported or excavated sand proposed for placement on the project site.
5. Proposed drainage plans and dewatering activities.
6. Form 62B-56.900(3), F.A.C., entitled “Sand Quality Assurance/Quality Control (QA/QC) Plan” (effective 6-22-09), which is incorporated by reference. Copies of forms may be obtained by writing to the Department of Environmental Protection, Bureau of 2600 Blairstone Road, MS 3522, Tallahassee, Florida 32399-2400; or at the following website: www.dep.state.fl.us/beaches. The QA/QC plan shall detail measures for testing, screening, handling, monitoring and remediation of all excavated or filled material and shall include mechanisms to ensure that only beach compatible sand is placed on the project site; and,
7. Surface area measurements (in square feet) of existing native beach-dune vegetation within the project limits, native beach-dune vegetation to be disturbed, and native beach-dune vegetation to be preserved or planted.
(q) Dimensioned cross-sections drawn to an appropriate scale, in 8 1/2 by 11 inch format, showing:
1. All subgrade construction or excavation with elevations referenced to NAVD 88 (U.S. survey foot).
2. Typical cross-sections of the reconstructed dune depicting geotextile core and elevations.
3. Location of the CCCL or, if not established, the mean high water line.
4. Typical profile of existing and proposed grade at the site; and,
5. The location of the contour line corresponding to elevation 0.0 NAVD 88 (U.S. survey foot).
Rulemaking Authority 161.053(20), 161.0535, 161.085(5) FS. Law Implemented 120.60, 161.053(2), (3), (5), 161.085(9) FS. History–New 6-22-09, Amended 5-9-13.