Fla. Admin. Code R. 40B-3.531
(1) All abandoned water wells, abandoned artesian wells, and wells that no longer serve an intended purpose shall be plugged using all or a combination of the following materials and methods, unless an alternative abandonment plan is approved in advance by the District in accordance with Section 373.326(1), F.S.:
(b) Bentonite chip material introduced into the well as follows:
1. The material is screened at land surface to remove fine particles prior to introduction into the well;
2. The material is only placed below the static water level; and
3. The material is introduced into the well in a manner that prevents bridging.
(c) Clean sand or aggregate introduced into the well as follows:
1. The material is used after significant loss of grout has occurred or is anticipated;
2. The integrity of any confining unit is maintained;
3. The material is introduced into the well in a manner that prevents bridging; and
4. The material is not used to plug any portion of the well casing.
(2) In addition to the provisions set forth in subsection 40B-3.531(1), F.A.C., the following methods are authorized for well abandonments:
Rulemaking Authority 373.044, 373.171, 373.308, 373.309, 373.337 FS. Law Implemented 373.206, 373.306, 373.308, 373.309, 373.313, 373.316 FS. History–New 7-1-85, Amended 6-22-99, 4-9-26.