2202.1 The Inclusionary Development Owner shall file a written application for a Certificate of Inclusionary Zoning Compliance with the Department of Consumer and Regulatory Affairs no later than the date upon which the first application for a building permit is filed for the Inclusionary Development.

2202.2 The Inclusionary Development Owner shall include with its application for a Certificate of Inclusionary Zoning Compliance payment of an application fee of two hundred fifty dollars ($250).

2202.3 The Inclusionary Development Owner shall file its application for a Certificate of Inclusionary Zoning Compliance on a form prescribed by the Department of Consumer and Regulatory Affairs and shall provide such information as is requested on the form.

2202.4 The application form for a Certificate of Inclusionary Zoning Compliance shall include:

(a) The name of the Inclusionary Development, its marketing name if different, and the apartment house or condominium name, if applicable;

(b) The street address of the Inclusionary Development;

(c) The zone district and, if applicable, overlay district in which the Inclusionary Development is located;

(d) The current and proposed square, suffix, and lot numbers on which the Inclusionary Development will be located;

(e) A list of all Inclusionary Units in the Inclusionary Development. Each Inclusionary Unit shall be identified by unit number, net square footage, and the number of bedrooms. The list shall also include, and separately identify, any Inclusionary Units that will serve as the location for the offsite compliance of another Inclusionary Development, as approved by the Board of Zoning Adjustment, together with a copy of the Board of Zoning Adjustment order approving the offsite compliance;

(f) A certification from the Inclusionary Development's architect or engineer that the size of each Inclusionary Unit is at least ninety-eight percent (98%) of the average size of the same type of Market Rate Unit in the development or at least ninety-eight percent (98%) of the size indicated in the following table, whichever is lesser:

Types of Dwelling	Type of Unit	Minimum Unit Size (square feet)
Multiple Family Dwelling	Studio/ Efficiency	400
	One Bedroom	550
	Two Bedroom	800
	Three Bedroom	1000
	Four Bedroom	1050
One or Two Household Dwellings	Two Bedroom	1000
	Three Bedroom	1200
	Four Bedroom	1400

(g) A copy of the site plan, front elevation or block face, and all residential floor plans for the Inclusionary Development. The floor plans shall show the location of each

Inclusionary Unit and each Market Rate Unit and shall identify each by unit number;

1. (h) A copy of the building plat, if required by the Department of Consumer and Regulatory Affairs pursuant to 12A DCMR § 106.1.12;
2. (i) An unsigned copy of the Inclusionary Development Covenant described in § 2204;
3. (j) A deed of trust, if required by the Department of Housing and Community Development pursuant to § 2204.2;
4. (k) A plan for the phasing of construction that demonstrates compliance with 11 DCMR § 2605.5, which requires that all Inclusionary Units in an Inclusionary Development be constructed prior to or concurrently with the construction of Market Rate Units, except that in a phased development, the Inclusionary Units shall be constructed at a pace that is proportional with the construction of the Market Rate Units;
5. (l) The total land area of all of the lots included in the Inclusionary Development;
6. (m) The total gross square footage of the Inclusionary Units in the Inclusionary Development, the net residential square footage of the Inclusionary Development, and the gross residential square footage of the Inclusionary Development;
7. (n) The total net floor area that will be set aside for Inclusionary Units as calculated by multiplying the total gross square footage of the Inclusionary Units required by 11 DCMR § 2603 by the ratio of the net residential square footage to the gross residential square footage of the Inclusionary Development;
8. (o) The total gross floor area of Inclusionary Units that will be set aside for Low-Income Households, if such Inclusionary Units are required by 11 DCMR § 2603.3, calculated pursuant to the method set forth in paragraph (n) of this subsection;
9. (p) A proposed schedule of standard finishes, fixtures, equipment, and appliances for both Inclusionary Units and Market Rate Units;
10. (q) For each Inclusionary Unit, the approximate date by which the Inclusionary Development Owner will provide a Notice of Availability pursuant to § 2206;
11. (r) If construction of the Inclusionary Development will result in the temporary displacement of tenants who are entitled by law to return to comparable units, a list of the Inclusionary Units for which a right of return exists; and
12. (s) Such other information as may be requested by the Department of Consumer and Regulatory Affairs.

SOURCE: As amended by Final Rulemaking published at 56 DCR 3907 (May 15, 2009).