(a) A transit agency or State must establish a Public Transportation Agency Safety Plan that meets the requirements of this part and, at a minimum, consists of the following elements:
(1) The Public Transportation Agency Safety Plan, and subsequent updates, must be signed by the Accountable Executive and approved by—
- (i) For a large urbanized area provider, the Safety Committee established pursuant to § 673.19, followed by the transit agency's Board of Directors or an equivalent entity; or
- (ii) For all other transit agencies, the transit agency's Board of Directors or an equivalent entity.
- (2) The Public Transportation Agency Safety Plan must document the processes and activities related to Safety Management System (SMS) implementation, as required under subpart D of this part.
- (3) The Public Transportation Agency Safety Plan must include annual safety performance targets based on the safety performance measures established under the National Public Transportation Safety Plan. Safety performance targets for the safety risk reduction program are only required for large urbanized area providers.
- (4) The Public Transportation Agency Safety Plan must address all applicable requirements and standards as set forth in FTA's Public Transportation Safety Program and the National Public Transportation Safety Plan. Compliance with the minimum safety performance standards authorized under 49 U.S.C. 5329(b)(2)(C) is not required until standards have been established through the public notice and comment process.
- (5) Each transit agency must establish a process and timeline for conducting an annual review and update of the Public Transportation Agency Safety Plan.
(6) A rail transit agency must include or incorporate by reference in its Public Transportation Agency Safety Plan:
- (i) An emergency preparedness and response plan or procedures that addresses, at a minimum, the assignment of transit worker responsibilities during an emergency; and coordination with Federal, State, regional, and local officials with roles and responsibilities for emergency preparedness and response in the transit agency's service area;
- (ii) Any policies and procedures regarding rail transit workers on the roadway the rail transit agency has issued; and
- (iii) The transit agency's policies and procedures developed in consultation with the State Safety Oversight Agency to provide access and required data for the State Safety Oversight Agency's risk-based inspection program.
(7) The Public Transportation Agency Safety Plan of each large urbanized area provider must include a safety risk reduction program for transit operations to improve safety performance by reducing the number and rates of safety events, injuries, and assaults on transit workers. The safety risk reduction program must, at a minimum:
- (i) Address the reduction and mitigation of vehicular and pedestrian safety events involving transit vehicles that includes safety risk mitigations consistent with § 673.25(d)(3);
- (ii) Address the reduction and mitigation of assaults on transit workers that includes safety risk mitigations consistent with § 673.25(d)(4);
(iii) Include the safety performance targets set by the Safety Committee pursuant to § 673.19(d)(2) for the safety risk reduction program performance measures established in the National Public Transportation Safety Plan. These targets must be set—
- (A) Based on a three-year rolling average of the data submitted by the large urbanized area provider to the National Transit Database (NTD);
- (B) For all modes of public transportation; and
- (C) Based on the level of detail the large urbanized area provider is required to report to the NTD. The Safety Committee is not required to set a target for a performance measure until the large urbanized area provider has been required to report three years of data to the NTD corresponding to such performance measure.
- (iv) Include or incorporate by reference the safety risk mitigations identified and recommended by the Safety Committee as described in § 673.25(d)(5).