Supplement No. 2 to Part 746—Russian and Belarusian Industry Sector Sanction List Pursuant to § 746.8(a)(4)

1. (a) The source for the Harmonized Tariff Schedule (HTS)-6 codes and descriptions in this list comes from the United States International Trade Commission (USITC's) Harmonized Tariff Schedule of the United States (2023). The items described in supplement no. 2 to part 746 include any modified or designed “components,” “parts,” “accessories,” and “attachments” therefor regardless of the HTS Code or HTS Description of the “components,” “parts,” “accessories,” and “attachments,” apart from any “part” or minor “component” that is a fastener (e.g., screw, bolt, nut, nut plate, stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet, bushing, spring, wire, or solder. The exclusion of fasteners from this control does not apply to fasteners that are designated under an HTS Code under this supplement. Although generally fasteners (e.g., screws, bolts, nuts, nut plates, studs, inserts, clips, rivets, pins), and washers, spacers, insulator, grommets, bushings, springs, wires, and solders are excluded from the scope of this supplement, certain part 744 license requirements for Russia and Belarus extend to all items “subject to the EAR,” and would therefore not exclude these items from the license requirements under that part (e.g., § 744.21 of the EAR and the Entity List license requirements, which in most cases extend to all items “subject to the EAR”). This supplement includes two columns consisting of the HTS Codes and HTS Descriptions to assist exporters, reexporters, and transferors in identifying the products in this supplement. For information on HTS codes in general, you may contact a local import specialist at U.S. Customs and Border Protection at the nearest port. HTS-6 codes 730424, 731100, 761300, 841350, 841360, 841382, 841392, 842139, 843049, 843139, 843143, 847989, and 870520 are listed in both this supplement and supplement no. 4 to this part, so exporters, reexporters, and transferors must comply with the license requirements under both § 746.8(a)(4) and (5) as applicable.

2. (b) The items identified in the HTS-6 Code column of this supplement are subject to the license requirement under § 746.8(a)(4). The other column—HTS Description—is intended to assist exporters with their Automated Export System (AES) filing responsibilities. The other column—HTS Description—is intended to assist exporters with their Automated Export System (AES) filing responsibilities. The license requirements apply to HTS Codes at the 8 and 10 digit level (HTS-8 and HTS-10 Codes, respectively) when such longer HTS codes begin with the HTS-6 Codes as their first 6 numbers.

   HTS-6 code	HTS description
   730411	LINE PIPE FOR OIL AND GAS PIPELINES, OF STAINLESS STEEL.
   730419	LINE PIPE FOR OIL AND GAS PIPELINES, OF SEAMLESS IRON (OTHER THAN CAST IRON) OR STEEL, NES.
   730422	DRILL PIPE OF A KIND USED IN DRILLING FOR OIL OR GAS, OF STAINLESS STEEL.
   730423	DRILL PIPE OF A KIND USED IN DRILLING FOR OIL OR GAS, OF IRON (EXCEPT CAST IRON) OR STEEL. NES.
   730424	CASING & TUBING USED IN DRILLING FOR OIL OR GAS, OTHER OF STAINLESS STEEL.
   730429	CASING AND TUBING OF A KIND USED IN DRILLING FOR OIL OR GAS, OF IRON (EXCEPT CAST IRON) OR STEEL.
   730511	LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, LONGITUDINALLY SUBMERGED ARC WELDED.
   730512	LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, LONGITUDINALLY WELDED NESOI.
   730519	LINE PIPE FOR OIL OR GAS PIPELINES, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL, RIVETED OR SIMILARLY CLOSED NESOI.
   730520	CASING FOR OIL OR GAS DRILLING, EXTERNAL DIAMETER OVER 406.4 MM (16 IN.), OF IRON OR STEEL.
   730611	LINE PIPE FOR OIL OR GAS PIPELINES, WELDED, OF STAINLESS STEEL, NESOI.
   730619	LINE PIPE FOR OIL OR GAS PIPELINES, OF IRON OR STEEL, NESOI.
   731100	CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS, OF IRON OR STEEL.
   761300	ALUMINUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS.
   820713	ROCK DRILLING OR EARTH BORING TOOLS WITH WORKING PART OF CERMETS, AND PARTS THEREOF.
   820719	INTERCHANGEABLE TOOLS FOR HANDTOOLS, WHETHER OR NOT POWER-OPERATED, OR FOR MACHINE-TOOLS, INCLUDING ROCK DRILLING OR EARTH BORING TOOLS; BASE METL PARTS.
   841350	RECIPROCATING POSITIVE DISPLACEMENT PUMPS, NESOI.
   841360	ROTARY POSITIVE DISPLACEMENT PUMPS, NESOI.
   841382	LIQUID ELEVATORS.
   841392	PARTS OF LIQUID ELEVATORS.
   842139	FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR GASES, NESOI.
   843049	BORING OR SINKING MACHINERY, NESOI, OTHER THAN SELF-PROPELLED.
   843139	PARTS FOR LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY, NESOI.
   843143	PARTS FOR BORING OR SINKING MACHINERY, NESOI.
   847989	MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NESOI.
   870520	MOBILE DRILLING DERRICKS.
   870899	PARTS AND ACCESSORIES FOR MOTOR VEHICLES, NESOI.
   890520	FLOATING OR SUBMERSIBLE DRILLING OR PRODUCTION PLATFORMS.
   890590	LIGHT VESSELS, FIRE FLOATS, FLOATING CRANES AND OTHER VESSELS WITH NAVIGABILITY NOT THE MAIN FUNCTION, NESOI; FLOATING DOCKS.

[88 FR 12182, Feb. 27, 2023, as amended at 88 FR 33430, May 23, 2023; 89 FR 4812, Jan. 25, 2024; 89 FR 51665, June 18, 2024]