Jack A. OBERST and Wayne G. Schroeder, Plaintiffs-Appellants, v. INTERNATIONAL HARVESTER COMPANY, INC., Defendant-Appellee.
No. 79-1770.
United States Court of Appeals, Seventh Circuit.
Decided Sept. 19, 1980.
633 F.2d 863
Argued Feb. 13, 1980.
Some courts have taken the view that consumers need only read the combined note and disclosure statement to understand what was meant by a figure without a dollar sign. Household Consumer Discount Co. v. Payne, No. 8850 (Ohio App. Oct. 4, 1978); GAC Finance Corp. v. Burgess, 16 Wash.App. 758, 558 P.2d 1386 (1977). We do not believe this view of the combined note and disclosure statement properly allocates the burden imposed on lenders by the Act. The purpose of the Act is:
to assure a meaningful disclosure of credit terms so that the customer will be able to compare more readily the various credit items . . . and avoid the uninformed use of credit.
15 U.S.C. § 1601 .
This purpose is threatened by loan agreements which are unclear to consumers.
Plaintiffs shall recover costs from HFC.
Accordingly, we REVERSE the judgment of the district court and REMAND the case to the district court for further proceedings for the purpose of determining damages.
Martin H. Katz, Rock Island, Ill., for defendant-appellee.
Before FAIRCHILD, Chief Judge, and SWYGERT and CUMMINGS, Circuit Judges.
FAIRCHILD, Chief Judge.
This appeal challenges rulings of the district court on the admissibility of certain evidence. Plaintiffs-appellants Jack Oberst and Wayne Schroeder were injured in a single vehicle accident on April 16, 1975 involving a Transtar 4070A truck manufactured in 1973 by defendant International Harvester. Plaintiffs claimed that their injuries were caused by design defects in the cab of the truck, and the restraints in the sleeping compartment in the cab of the truck.
Schroeder was driving at the time of the accident. Oberst at that time occupied the sleeping compartment, but the force of the accident caused his ejection from the sleeping compartment into the seat area (and partially out a window). It was Oberst‘s claim that the defective design of the restraints in the sleeping compartment was responsible for his ejection from that compartment and his consequent injuries. The jury rendered a verdict for defendant. The evidentiary rulings complained of are concerned only with the bunk restraints. Because these rulings had no effect upon Schroeder‘s claims against International Harvester, the district court‘s judgment against Schroeder is accordingly affirmed.
The bunk restraint on the truck consisted of two vertical straps, placed about 36 inches apart at the front of the sleeping compartment, which were permanently attached to the floor and roof of the cab of the truck. Upon objections made by the defendant, the district court barred introduction of evidence regarding the types of restraining devices commercially available when defendant manufactured the Transtar 4070A, the kind of bunk restraint tested in a film seen in 1971 by engineering employees of the defendant, and post-accident change by the defendant of the type of bunk restraint installed in defendant‘s trucks.
Although plaintiffs were not permitted to show the types of restraints commercially available at the time of manufacture of the truck (referred to as availability) there was proof that other types of restraints, such as woven mesh, were feasible (referred to by the parties and the court as feasibility).
The bases for the exclusions of testimony and exhibits are not explicitly stated. The
The testimony of Robert E. McAfee as plaintiffs’ witness put into evidence much about feasibility of alternative designs for bunk restraints. McAfee, as chief engineer of the heavy-duty bodies for International Harvester, was responsible for deciding what bunk restraint to place in the Transtar 4070A. He testified that the purpose of the bunk restraint was to “keep the man in the bunk from being ejected during deacceleration . . . such as a panic-stop situation . . . .” McAfee claimed that one alternative restraint, the mesh type, was more effective in preventing ejection of a person from the sleeping compartment in accidents like the one involved in this case, but that such restraints would prove unnecessarily confining in other accidents, such as those involving fire or the truck going into a body of water, where speed of departure from the cab of the truck was important. McAfee further testified that he considered various methods of restraint straps,1 all of which he considered at that time to have been feasible to install. He indicated that the mesh restraint system would have required a redesign of the roof structure of the 4070A in order to be used in 1973 by International Harvester. McAfee also testified as to the feasibility of using active rather than passive restraints in the sleeping compartment but indicated that that alternative had been rejected because such systems would have been unacceptable to the drivers and thus would not have been used had they been installed. McAfee testified further that International Harvester purchased restraining belts and belt hardware from a seatbelt manufacturer. He said that commercial availability of a bunk restraint system would be a consideration in his determination of what kind of bunk restraint system to utilize.
The plaintiffs, defendant, and district court all agreed, out of the presence of the jury, that there was no dispute about the feasibility of alternative methods of bunk restraints. Plaintiffs claimed that this agreement concerned only what was theoretically able to be utilized as a restraint and that it had the right to show what restraints were actually manufactured and installed as of 1973. The plaintiffs sought a stipulation from the defendant that other identifiable types of restraints were commercially available in 1973, but the court said that such a stipulation would be prejudicial and have no probative value.
This court, applying Illinois law regarding proof in a products liability action, indicated that the plaintiffs must prove, inter alia, that “(1) the product as designed is incapable of preventing the injury complained of; (2) there existed an alternative design which would have prevented the injury; and (3) in terms of cost, practicality and technological possibility, the alternative design was feasible.” Lolie v. Ohio Brass Co., 502 F.2d 741, 744 (7th Cir.1974). Feasibility includes “the elements of economy, effectiveness and practicality,” and may be shown “by the opinions of experts or by the existence . . . on other products or in the design thereof . . . .” Sutkowski v. Universal Marion Corp., 5 Ill.App.3d 313, 319, 281 N.E.2d 749, 753 (1972). Whether commercial availability is viewed as an element of feasibility or as a separate issue, it is clear that proof of commercial availability of an alternative design is evidence of a material fact involved in a products liability action.
Because the evidence of design alternatives available in 1973 was relevant and there existed no valid policy reason for
It is a long-established rule that proof of repairs subsequent to an accident is not admissible to prove negligence in a tort action. Such evidence may, however, be introduced, for other purposes.
When, after an event, measures are taken which, if taken previously, would have made the event less likely to occur, evidence of the subsequent measures is not admissible to prove negligence or culpable conduct in connection with the event. This rule does not require the exclusion of evidence of subsequent measures when offered for another purpose, such as proving ownership, control, or feasibility of precautionary measures, if controverted, or impeachment.
Appellants contend that
The evidentiary exclusions, if error, constitute harmless error as to Oberst‘s claims.
SWYGERT, Circuit Judge, concurring and dissenting, in part.
I agree with the majority that the disputed evidentiary rulings had no effect upon Schroeder‘s claims. Therefore, I concur in the affirmance of the judgment against him. With respect to Oberst, however, I respectfully dissent.
For convenience and clarity, the evidentiary issues presented may be classified as pre-accident and post-accident. My primary dispute is with the majority‘s treatment of the post-accident evidence1 which consists of proof of the fact that in 1976 International Harvester began installing a different bunk restraint system in its model 4070A trucks. The new, mesh-type system was one which International Harvester knew to be commercially available before the accident. The majority discusses the admissibility of this evidence under both
Admissibility Under Rule 407
As the majority notes, Oberst “contend[s] that
Virtually all of the evidence regarding feasibility was presented in the testimony of Robert E. McAfee, who was in charge of designing the 4070A. According to the majority, McAfee testified that the mesh-type system “would have required redesign of the roof structure of the 4070A in order to be used in 1973 by International Harvester.” Ante at 865. Thus, McAfee‘s testimony is not unequivocal as to the economy element of feasibility. Regarding effectiveness, McAfee testified that the mesh system “was more effective in preventing ejection of a person from the sleeping compartment in accidents like the one involved in this case, but that such restraints would prove unnecessarily confining in other accidents . . . where speed of departure from the cab of the truck was important.” Id. McAfee also testified that the alternative systems would have been less likely to be used than the two-belt system. Ante at 864-865. Consequently, McAfee‘s testimony may not fairly be characterized as unequivocal as to the effectiveness component of feasibility. In fact, McAfee was unequivocal only as to the fact that the mesh system was considered to be technically possible to install. The single concession was not sufficient to preclude admission of the proffered evidence.
Under
An examination of the background of the reasons for
Illinois Law
The majority asserts that “[t]he weight of authority in Illinois” rejects Oberst‘s interpretation of
There are essentially three flaws in the majority‘s analysis of this issue. First, assuming arguendo that Burke is not supported by Sutkowski and Mahoney, surely the Illinois Appellate Court was free to join the trend against the exclusion of evidence of subsequent remedial measures in strict liability cases even if such a rule is contrary to prior Illinois case law. If it did so, we are required to defer to the Illinois court‘s interpretation of its own law. Second, Burke is amply supported by the two cases upon which it relied. In Sutkowski, the court reversed a judgment entered upon a jury verdict for the defendant, in part because the trial court excluded evidence of a post-accident modification. The plaintiff, who was crushed to death by a piece of strip mining equipment, alleged both strict liability and breach of warranty against the manufacturer. The trial court excluded the evidence because it was inadmissible to prove negligence. The appellate court held that the evidence was admissible to prove that an alternative design was feasible. 281 N.E.2d at 752. The court did not limit its holding, as the majority implies, to those cases in which feasibility is contested, and there was no indication in the case that feasibility was controverted. Sutkowski was so construed in Ault, 117 Cal.Rptr. at 816, 528 P.2d at 1152, and by this court in Mahoney, 490 F.2d at 232. In Mahoney, the trial court excluded evidence of subsequent design changes which, as in Sutkowski, apparently was offered as part of the plaintiff‘s case-in-chief. Finally, even if Sutkowski and Mahoney do not support Burke, recent Illinois cases clearly demonstrate Illinois adoption of the Ault position. In Smith v. Verson Allsteel Press Co., 74 Ill.App.3d 818, 30 Ill.Dec. 562, 393 N.E.2d 598 (1979), the plaintiff recovered from the manufacturer on a strict liability theory. On appeal, the defendant argued, inter alia, that the trial court erroneously admitted evidence of subsequent design changes. The appellate court rejected this argument, saying that the rule excluding such evidence was inapplicable to strict liability actions. 30 Ill.Dec. at 570, 393 N.E.2d at 606.9 See also Christopherson v. Hyster Co., 58 Ill.App.3d 791, 16 Ill.Dec. 83, 374 N.E.2d 858 (1978).
In conclusion, because the proffered evidence was admissible and its exclusion greatly prejudiced Oberst, I would reverse the judgment against him and remand for a new trial.
Notes
A. It was single-strap types, double-straps, lap-belt types, mesh, harnesses . . . Great number of different types and feasibility of using different types was explored. 1. Relying upon
The Supreme Court recently has reaffirmed the analysis of problems such as the one presented here, which was set forth in Hanna v. Plumer, 380 U.S. 460, 85 S.Ct. 1136, 14 L.Ed.2d 8 (1965). See Walker v. Armco Steel Corp., 446 U.S. 740, 100 S.Ct. 1978, 64 L.Ed.2d 659 (1980). Pursuant to that analysis, where, as here, a federal and state rule both govern the issue in dispute and are in conflict, the federal rule is applied in a diversity case if it is arguably procedural. But, where there is no pertinent federal rule, usually a specific state rule will be applied. See, e. g., Walker, supra (method of commencing action for purposes of statute of limitations controlled by state law rather than by
Mr. McAfee would have testified that in October of 1971 he personally at International Harvester observed a movie produced by a company by the name of Hammil Corporation, a supplier of seat belts and bunk restraint materials, which movie illustrated an accident sequence involving a vehicle such as the 4070-A tractor and utilizing a bunk restraint system consisting of an interwoven web design as opposed to the system being used at that time by International Harvester, consisting of two single vertical straps.
That Mr. McAfee would further have testified, as he did in his deposition, that having viewed that movie in October of 1971, he assessed the capabilities of that bunk restraint system to protect against an occupant of the sleeping compartment from being involuntarily ejected from the sleeping compartment during an accident sequence and to be greater in the case of the interwoven design than in the case of the two vertical single straps.
Further, Mr. McAfee would have testified that directly related to having seen that film and the assessment by International Harvester based upon what they saw in that movie, International Harvester did in fact make a decision to utilize a restraint system which was in its design of the interwoven type rather than of the single strap type.
* * * * * *
If I may continue, your Honor, on that same point, that decision was made prior to October of 1973 as to the fact that that type of restraint system was of a better design and would be utilized by International Harvester. That in fact they began purchasing bunk restraints of that type in 1973. International Harvester‘s records would reflect as early as December of 1973, but simply do not reflect any further back as to when the date of purchase actually may have been.
Irrespective of having reached that decision in that point of time, International Harvester continued to use the single-strap system on the subject tractor and on the 4070-A until late fall of 1976, at which time they used-for the first time-the interwoven strap system on a tractor Model 4070-B which was the replacement model for the 4070-A, and essentially identical with some modifications in terms of improvement, in terms of overall design.
Plaintiff expects to be able to show that one, if not the primary, consideration of the reasons of why the restraints were not used earlier was that International Harvester simply chose to wait until the total concept was developed for the 4070-B, but it had already made the decision that those bunk restraints were safer in terms of preventing ejectment, exactly the language contained in the regulation which Mr. McAfee was testifying to that he felt his belts were in conformance with. Record at 323-26. In other words, Oberst sought to prove not only that the mesh system was installed after the accident, but that the decision to do so was made before the accident and that the delay was attributable purely to economic concerns. This evidence so impeached McAfee‘s explanation of why the mesh system was not installed in the 1973 model 4070A trucks that it should have been admitted. Its exclusion cannot be deemed harmless error.
No error in either the admission or the exclusion of evidence . . . is ground for granting a new trial or for setting aside a verdict or for vacating, modifying, or otherwise disturbing a judgment or order, unless refusal to take such action appears to the court inconsistent with substantial justice. The court at every stage of the proceeding must disregard any error or defect in the proceeding which does not affect the substantial rights of the parties. 4. The majority‘s reliance upon Illinois case authority to refute the assertion that
