Plaintiff brought this action for damages against the retailer and the manufacturer of a Shopsmith, a combination power tool that could be used as a saw, drill, and wood lathe. He saw a Shopsmith demonstrated by the retailer and studied a brochure prepared by the manufacturer. He decided he wanted a Shopsmith for his home workshop, and his wife bought and gave him one for Christmas in 1955. In 1957 he bought the necessary attachments to use the Shopsmith as a lathe for turning a large piece of wood he wished to make into a chalice. After he had worked on the piece of wood several times without difficulty, it suddenly flew out of the machine and struck him on the forehead, inflicting serious injuries. About 10% months later, he gave the retailer and the manufacturer written notice of claimed breaches of warranties and filed a complaint against them alleging such breaches and negligence.
After a trial before a jury, the court ruled that there was no evidence that the retailer was negligent or had breached any express warranty and that the manufacturer was not liable for the breach of any implied warranty. Accordingly, it submitted to the jury only the cause of action alleging breach of implied warranties against the retailer and the causes of action alleging negligence and breach of express warranties against the manufacturer. The jury returned a verdict for the retailer against plaintiff and for plaintiff against the manufacturer in the amount of $65,000. The trial court denied the manufacturer’s motion for a new trial and *60 entered judgment on the verdict. The manufacturer and plaintiff appeal. Plaintiff seeks a reversal of the part of the judgment in favor of the retailer, however, only in the event that the part of the judgment against the manufacturer is reversed.
Plaintiff introduced substantial evidence that his injuries were caused by defective design and construction of the Shopsmith. His expert witnesses testified that inadequate set screws were used to hold parts of the machine together so that normal vibration caused the tailstock of the lathe to move away from the piece of wood being turned permitting it to fly out of the lathe. They also testified that there were other more positive ways of fastening the parts of the machine together, the use of which would have prevented the accident. The jury could therefore reasonably have concluded that the manufacturer negligently constructed the Shopsmith. The jury could also reasonably have concluded that statements in the manufacturer’s brochure were untrue, that they constituted express warranties, 1 and that plaintiff’s injuries were caused by their breach.
The manufacturer contends, however, that plaintiff did not give it notice of breach of warranty within a reasonable time and that therefore his cause of action for breach of warranty is barred by section 1769 of the Civil Code. Since it cannot be determined whether the verdict against it was based on the negligence or warranty cause of action or both, the manufacturer concludes that the error in presenting the warranty cause of action to the jury was prejudicial.
Section 1769 of the Civil Code provides•. “In the absence of express or implied agreement of the parties, acceptance of the goods by the buyer shall not discharge the seller from liability in damages or other legal remedy for breach of any promise or warranty in the contract to sell or the sale. But, if, after acceptance of the goods, the buyer fails to give notice .to the seller of the breach of any promise or warranty within a reasonable time after the buyer knows, or ought to know of such breach, the seller shall not be liable therefor.”
Like other provisions of the Uniform Sales Act (Civ.
*61
Code, §§ 1721-1800), section 1769 deals with the rights of the parties to a contract of sale or a sale. It does not provide that notice must be given of the breach of a warranty that arises independently of a contract of sale between the parties. Such warranties are not imposed by the sales act, but are the product of common-law decisions that have recognized them in a variety of situations. (See
Gagne
v.
Bertran,
The notice requirement of section 1769, however, is • not an appropriate one for the court to adopt in actions by injured consumers against manufacturers with whom they have not dealt.
(La Hue
v.
Coca-Cola Bottling, Inc.,
Moreover, to impose strict liability on the manufacturer under the circumstances of this case, it was not necessary for plaintiff to establish an express warranty as defined in section 1732 of the Civil Code.
2
A manufacturer is strictly liable in tort when an article he places on the market, knowing that it is to be used without inspection for defects, proves to have a defect that causes injury to a human being. Eeeognized first in the case of unwholesome food products, such liability has now been extended to a variety of other products that create as great or greater hazards if defective.
(Peterson
v.
Lamb Rubber Co.,
Although in these cases strict liability has usually been based on the theory of an express or implied warranty running from the manufacturer to the plaintiff, the abandonment of the requirement of a contract between them, the recognition that the liability is not assumed by agreement but imposed by law (see e.g.,
Graham
v.
Bottenfield’s, Inc.,
We need not recanvass the reasons for imposing strict liability on the manufacturer. They have been fully articulated in the cases cited above. (See also 2 Harper and James, Torts, §§ 28.15-28.16, pp. 1569-1574; Prosser,
Strict Liability to the Consumer,
69 Yale L.J. 1099;
Escola
v.
Coca Cola Bottling Co.,
*64
fitfully at best. (See Prosser,
Strict Liability to the Consumer,
69 Yale L.J. 1099, 1124-1134.) In the present ease, for example, plaintiff was able to plead and prove an express warranty only because he read and relied on the representations of the Shopsmith’s ruggedness contained in the manufacturer’s brochure. Implicit in the machine’s presence on the market, however, was a representation that _it would safely do the jobs for which it was built. Under ' these circumstances, it should not be controlling whether . plaintiff selected the machine because of the statements in the brochure, or because of the machine’s own appearance of excellence that belied the defect lurking beneath the surface, j or because he merely assumed that it would safely do the jobs ¡_it was built to do. It should not be controlling whether the details of the sales from manufacturer to retailer and from retailer to plaintiff’s wife were such that one or more of the implied warranties of the sales act arose. (Civ. Code, § 1735.) “The remedies of injured consumers ought not to be made to depend upon the intricacies of the law of sales.”
(Ketterer
v.
Armour & Co.,
The manufacturer contends that the trial court erred in refusing to give three instructions requested by it. It appears . from the record, however, that the substance of two of the requested instructions was adequately covered by the instructions given and that the third instruction was not supported by the evidence.
The judgment is affirmed.
Gibson, C. J., Schauer, J., MeComb, J., Peters, J., Tobriner, J., and Peek, J., concurred.
Notes
In this respect the trial court limited the jury to a consideration of two statements in the manufacturer’s brochure. (1) “When Shop-smith Is in Horizontal Position—Bugged construction of frame provides rigid support from end to end. Heavy centerless-ground steel tubing insures perfect alignment of components.” (2) “Shopsmith maintains its accuracy because every component has positive locks that hold adjustments through rough or precision work.”
“Any affirmation of fact or any promise by the.seller relating to the goods is an express warranty if the natural tendency of such affirmation or promise is to induce the buyer to purchase the goods, and if the buyer purchases the goods relying thereon. No affirmation of the value of the goods, nor any statement purporting to be a statement of the seller’s opinion only shall be construed as a warranty,”
