Wash. Admin. Code § 296-807-17020
| Note: | There are two types of inspection, frequent or periodic, depending on how often they are done. |
(1) You must inspect jacks at appropriate intervals:
(a) Make sure frequent inspections are done by the operator or other designated person as follows:
(2) You must make sure a jack that is out of order is:
(3) You must make sure a jack is properly lubricated at regular intervals.
| Note: | The jack should be lubricated following the manufacturer's instructions. |
Table 4
Jack Inspection Requirements
| Inspection Item | FrequentInspection | PeriodicInspection | |
| Check all of the following items that apply to the jack: | |||
| Improper pawl engagement | X | X | |
| Excessive pawl wear | X | X | |
| Chipped, cracked, or worn rack teeth | X | X | |
| Cracked or damaged housing | X | X | |
| Damaged, bent, or worn threads | X | X | |
| Leaking hydraulic fluid | X | X | |
| Scored or damaged plunger | X | X | |
| Improper functioning | X | X | |
| Free movement of swivel, heads, and caps | X | X | |
| Loose bolts or rivets | X | X | |
| Damaged or improperly assembled accessory equipment | X | X | |
| Rack wear or bending | X | X | |
| Other items as specified in the manufacturer's instructions | X | X | |
| Watch the jack during operation | X | X | |
| More detailed inspection required if a designated person determines any condition discovered is a hazard | X | ||
| Clean and check internal parts for wear or damage if inspection indicates an internal problem | X |
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-807-17020, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 07-03-163, § 296-807-17020, filed 1/24/07, effective 4/1/07; WSR 03-09-009, § 296-807-17020, filed 4/4/03, effective 8/1/03.]