- (1) Circular saws must not be operated at speeds in excess of those specified by the manufacturers.
- (2) Circular saws must be inspected for cracks each time the teeth are filed or set. They must be discontinued from use until properly repaired when found to have developed a crack exceeding the safe limits specified by the manufacturer.
- (3) Damaged saws must be repaired only by persons experienced and knowledgeable in this type of work or by a manufacturers representative.
[Statutory Authority: RCW 49.17.010, [49.17].040 and [49.17].050. WSR 99-16-083, § 296-79-27007, filed 8/3/99, effective 11/3/99; Order 74-24, § 296-79-27007, filed 5/6/74.]