1. (1) Employers must fully enclose elevator cars to car height or to a height of not less than six feet six inches whichever is greater. Elevator cars may be of perforated or solid material provided the material will withstand a horizontal thrust of 75 pounds without deflecting one-quarter inch and all openings will reject a one inch ball.

   1. (a) Car frames must be of substantial metal or wood construction with a safety factor of four for metal frames and six for wood frames.
   2. (b) Wood frames must be gusseted and bolted or otherwise secured with large washers and lock washers.
   3. (c) The car platform must not exceed 30 inches inside dimension on each side (6.25 square foot area).
2. (2) Every car must have a substantial protective top. The front half may be hinged. The protective top may be made from number nine U.S. wire gauge screen, 11 gauge expanded metal, 14 gauge sheet steel, or three-quarter inch or heavier plywood. If made of wire screen or metal, the openings must reject a one-half inch diameter ball.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060, 70.54.480, and chapter 49.17 RCW. WSR 26-07-053, s 296-56-60145, filed 3/17/26, effective 4/20/26. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-56-60145, filed 12/1/15, effective 1/5/16. Statutory Authority: RCW 49.17.040 and 49.17.050. WSR 86-03-064 (Order 86-02), § 296-56-60145, filed 1/17/86; WSR 85-01-022 (Order 84-24), § 296-56-60145, filed 12/11/84.]