1. A. Change the exception to Section 1804.6 of the IBC to read:

   Exception: Compacted fill material less than 12 inches (305 mm) in depth need not comply with an approved report, provided it is a natural non-organic material that is not susceptible to swelling when exposed to moisture and it has been compacted to a minimum of 90% Modified Proctor in accordance with ASTM D1557. The compaction shall be verified by a qualified inspector approved by the building official. Material other than natural material may be used as fill material when accompanied by a certification from an RDP and approved by the building official.

2. B. Add an exception to Section 1808.1 of the IBC to read:

   1. 1. The building eave height is 10 feet (3048 mm) or less.
   2. 2. The maximum height from the finished floor level to grade does not exceed 18 inches (457.2 mm).
   3. 3. The supporting structural elements in direct contact with the ground shall be placed level on firm soil and when such elements are wood they shall be approved pressure preservative treated suitable for ground contact use.
   4. 4. The structure is anchored to withstand wind loads as required by this code.
   5. 5. The structure shall be of light-frame construction with walls and roof of light weight material, not slate, tile, brick or masonry.

   Exception: One-story detached accessory structures not exceeding 256 square feet (23.78m²) of building area, provided all of the following conditions are met:

Statutory Authority

§ 36-98 of the Code of Virginia.

Historical Notes

Derived from Virginia Register Volume 22, Issue 3, eff. November 16, 2005; amended, Virginia Register Volume 27, Issue 2, eff. March 1, 2011; Change in Effective Date, 27:5 VA.R. 534 November 8, 2010; amended, Virginia Register Volume 34, Issue 18, eff. September 4, 2018.