1. (1) When reviewing registration papers of a vehicle, the inspector shall:

   1. (a) check the vehicle registration certificate, vehicle identification number, license plate, and vehicle description for agreement;
   2. (b) enter the manufacturer's vehicle identification number and license plate number into the online program or record on the safety inspection certificate if not using the online program;
   3. (c) advise the customer when paperwork disagreements are accidental or clerical in nature; and

   4. (d) issue a rejection inspection certificate when:

      1. (i) the registration certificate, vehicle identification number, license plate, and vehicle description are not in agreement; or
      2. (ii) the vehicle identification number is missing or obscured.

2. (2) The inspector shall examine the vehicle's license plate and comply with the following requirements:

   1. (a) if the vehicle is registered, verify the license plate is securely mounted and clearly visible; and

   2. (b) advise the customer when the license plate:

      1. (i) is not securely fastened to the rear of the vehicle, in a horizontal position, not less than 12 inches from the ground when measured from the bottom of the license plate;
      2. (ii) is not located in a clearly visible position; or
      3. (iii) is covered with foreign material or otherwise not clearly legible.

KEY: motor vehicle safety, safety inspection manual

Date of Last Change: September 27, 2016

Notice of Continuation: April 29, 2026

Authorizing, and Implemented or Interpreted Law: 53-8-204; 53-8-205; 41-6a-1601