1. (1) When inspecting the electrical system of a vehicle, the inspector shall:

   1. (a) check the horn; and

      1. (i) advise the customer when the horn is not securely fastened; or
      2. (ii) issue a rejection inspection certificate when the horn does not function properly or is not audible under normal conditions at a distance of at least 200 feet;

   2. (b) check the electrical switches and wiring; and

      1. (i) advise the customer when:

         1. (A) electrical switches fail to function as designed for OEM required equipment;
         2. (B) connections show signs of corrosion; or
         3. (C) permanent connection wires are not soldered and insulated; or
      2. (ii) issue a rejection inspection certificate when wiring insulation is worn or rubbed bare;

   3. (c) check the automatic or manual transmission safety starting switch; and

      1. (i) issue a rejection inspection certificate when:

         1. (A) the starter operates in any gear other than "P" or "N" for an automatic transmission; or
         2. (B) the vehicle starter operates without the clutch depressed for a manual transmission, when equipped with a neutral safety switch; and

   4. (d) check for battery securement; and

      1. (i) issue a rejection inspection certificate when a battery is not properly secured.

KEY: motor vehicle safety, safety inspection manual

Date of Last Change: December 6, 2018

Notice of Continuation: April 29, 2026

Authorizing, and Implemented or Interpreted Law: 53-8-204; 53-8-205; 41-6a-1601