1. (1) A manufacturer submitting a system for certification shall ensure cameras installed on a system shall:

   1. (a) not impede the field of vision for the safe and legal operation of the vehicle;
   2. (b) not pose a threat to the driver or passengers of the vehicle in the event of dislodgement;
   3. (c) take an image of the individual with sufficient clarity to allow identification;

   4. (d) capture images of the individual conducting the breath alcohol test for the following:

      1. (i) successful completion of the initial breath test sample;
      2. (ii) successful completion of any retest breath test sample;
      3. (iii) unsuccessful delivery of the initial breath test sample;
      4. (iv) unsuccessful delivery of any retest breath test sample; and
      5. (v) high breath alcohol test results;
   5. (e) capture identifiable images in any lighting condition; and

   6. (f) incorporate tamper detection features that include:

      1. (i) covering, blocking, or coating of the lens to distort the image;
      2. (ii) repositioning of the field of view so that it no longer is aimed at the driver; and
      3. (iii) disconnection from communication or power from the system.

2. (2) Images taken by the camera shall be stored by the manufacturer with the:

   1. (a) date and time of the image capture;
   2. (b) results of each breath test; and

   3. (c) corresponding system serial number of the:

      1. (i) relay; and
      2. (ii) handset.
3. (3) A manufacturer shall have data readily available to the division upon request.
4. (4) A system shall be decertified by the division if the system is not equipped with a camera by October 31, 2024.

KEY: ignition interlock systems

Date of Last Change: March 12, 2024

Notice of Continuation: March 15, 2019

Authorizing, and Implemented or Interpreted Law: 41-6a-518; 53-3-1001