(1) A tag for a repaired, reupholstered, or renovated product shall:
- (a) be a minimum of two inches by three inches;
- (b) be yellow on both sides of the tag;
- (c) be made of material that cannot be easily torn;
- (d) have the required information printed on one side of the tag with the opposite side remaining blank;
- (e) be printed in English;
- (f) be printed in black ink;
- (g) be printed clearly and legibly; and
- (h) be firmly attached to the article.
(2) A tag for a repaired, reupholstered, or renovated product shall contain the following information, in order:
- (a) the phrase, "UNDER PENALTY OF LAW THIS TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label in capital letters, no less than 1/8 inch in height;
- (b) the phrase, "THIS ARTICLE IS NOT FOR SALE OWNER'S MATERIAL" in bold in capital letters, no less than 1/8 inch in height;
- (c) the phrase, "CERTIFICATION IS MADE THAT THIS ARTICLE CONTAINS THE SAME MATERIAL IT DID WHEN RECEIVED FROM THE OWNER AND THAT ADDED MATERIALS ARE DESCRIBED IN THE ACCORDANCE WITH LAW, AND CONSIST OF THE FOLLOWING:" followed by a description of the filling material;
- (d) a description of the work that was done on the product;
- (e) the URN number;
- (f) the name and address of the renovator or repairer; and
- (g) the date of pick-up, owner's name, and address.
KEY: inspections, labeling, quality control, registration, bedding, upholstered furniture, law labels, filling material
Date of Last Change: December 22, 2025
Notice of Continuation: May 7, 2025
Authorizing, and Implemented or Interpreted Law: 4-10-103