1. (1) each area and fixture within a dressing room is maintained in an operable, clean, and sanitary condition;
2. (2) where a dressing room is provided, the entrance and exit is designed to break the line of sight into the dressing area from any other location;
3. (3) each dressing room is constructed of materials that have smooth, non-slip surfaces and are impervious to moisture;
4. (4) each dressing room floor slopes to a drain and is constructed to prevent accumulation of water;
5. (5) carpeting is not installed on a dressing room floor;
6. (6) each junction between walls and floors is coved;
7. (7) any wall or partition between dressing cubicles begins at a height no more than 12 inches from and extend no less than 60 inches above the finished floor surface or is placed on a continuous raised masonry or concrete base at least four inches high;

8. (8) each locker is:

   1. (a) set on:

      1. (i) a solid masonry base no less than four inches high; or
      2. (ii) legs elevating the bottom locker at least four inches above the floor; and
   2. (b) equipped with passive ventilation; and
9. (9) at least one covered waste receptacle is provided in each dressing room.

The manager shall ensure that:

KEY: pools, spas, swimming, water

Date of Last Change: May 26, 2026

Notice of Continuation: October 21, 2021

Authorizing, and Implemented or Interpreted Law: 26B-1-202; 26B-7-113; 26B-7-124; 26B-7-402