Utah Admin. Code R307-350-5
(1) No owner or operator shall apply coatings with a VOC content greater than the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-350-8.
TABLE 1
METAL PARTS AND PRODUCTS VOC CONTENT LIMITS
(values in pounds of VOC per gallon of coating, minus water and
exempt solvents (compounds not classified as VOC as defined in
R307-101-2), as applied)
Coating Category VOC Content Limits (lb/gal)
Air Dried Baked
General One Component 2.8 2.3
General Multi Component 2.8 2.3
Camouflage 3.5 3.5
Electric-Insulating 3.5 3.5
varnish
Etching Filler 3.5 3.5
Extreme High-Gloss 3.5 3.0
Extreme Performance 3.5 3.0
Heat-Resistant 3.5 3.0
High-Performance 6.2 6.2
architectural
High-Temperature 3.5 3.5
Metallic 3.5 3.5
Military Specification 2.8 2.3
Mold-Seal 3.5 3.5
Pan Backing 3.5 3.5
Prefabricated Architectural 3.5 2.3
Multi-Component
Prefabricated Architectural 3.5 2.3
One-Component
Pretreatment Coatings 3.5 3.5
Repair and Touch Up 3.5 3.0
Silicone Release 3.5 3.5
Solar-Absorbent 3.5 3.0
Vacuum-Metalizing 3.5 3.5
Drum Coating, New, Exterior 2.8 2.8
Drum Coating, New, Interior 3.5 3.5
Drum Coating, Reconditioned, 3.5 3.5
Exterior
Drum Coating, Reconditioned, 4.2 4.2
Interior
KEY: air pollution, emission controls, coatings, miscellaneous metal parts
Date of Last Change: December 6, 2017
Notice of Continuation: February 1, 2023
Authorizing, and Implemented or Interpreted Law: 19-2-104(1)(a)