1. (1) No owner or operator shall apply coatings with a VOC content in excess of the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-343-6.

   Table 1

   WOOD MANUFACTURING COATING LIMITS

   (values in pounds VOC per pound of solids, minus water and

   exempt solvents (compounds not classified as VOC as defined in

   R307-101-2), as applied)

   Coating Category VOC Content Limit (lb/lb)

   Topcoat 0.4

   Single component, non-catalyzed sealer 0.9

   Single component, non-catalyzed topcoat 0.9

   Acid -- cured single and 2 component sealer 1.2

   Acid -- cured single and 2 component topcoat 1.0

   2 component polyurethane topcoat 1.0

   2 component polyurethane sealer 1.0

   Cobalt peroxide cured polyester sealer/topcoat 1.0

   Formaldehyde free acid catalyzed sealer/topcoat 1.0

   Strippable spray booth coatings 0.8

2. (2) The limits in Table 1 do not apply to canned aerosol coating products used exclusively for touch-up or repair.

KEY: air pollution, wood furniture, coatings

Date of Last Change: December 6, 2017

Notice of Continuation: December 1, 2021

Authorizing, and Implemented or Interpreted Law: 19-2-104(1)(a); 19-2-104(3)(e)