20 : 42 : 05 : 08 . Pedicure foot-spa stations. Pedicure foot-spa stations must be cleaned and disinfected after each client , including the outside surfaces of the pedicure foot-spa. The following procedures must be observed:

1. (1) At the end of each client service:

   1. (a) Drain all water and remove all debris from the spa basin;
   2. (b) Clean the spa basin with soap or detergent and water;
   3. (c) Disinfect the spa basin with a disinfectant; and
   4. (d) Wipe the spa basin with a clean towel until dry;

2. (2) At the end of each day, clean and disinfect each whirlpool foot spa basin in the following manner:

   1. (a) Remove the screen, and clean all debris trapped behind the screen;
   2. (b) Wash the screen with soap or detergent and water;
   3. (c) Immerse the screen completely in disinfectant;
   4. (d) Flush the spa system with low sudsing soap and warm water for at least 10 minutes; and
   5. (e) Rinse and drain the spa;

3. (3) At least once each week, each whirlpool foot spa must be cleaned and disinfected in the following manner:

   1. (a) Fill the spa basin completely with water and add one teaspoon of 5.25 percent bleach or recommended whirlpool disinfectant for each gallon of water. Use according to the manufacturer's instructions;
   2. (b) Flush the spa or bath system with bleach or recommended whirlpool disinfectant and water solution for 10 minutes;
   3. (c) Soak for at least 6 hours; and
   4. (d) Drain and flush the spa with water before use for a client.

Source: 46 SDR 46, effective October 3, 2019.

General Authority: SDCL 36-15-13(5).

Law Implemented: SDCL 36-15-13(5) .