S.C. Code Ann. § 23-45-147
Shop drawings of sprinkler system required; contents; submission; certificate of compliance
Published Jan 1, 2004
(A) Shop drawings must be prepared for every fire protection sprinkler system, as defined in Section 23-45-30(6), to be installed in South Carolina and must meet the following requirements:
- (1) shop drawings, along with any attached specification sheets, must contain sufficient information to show compliance with the National Fire Protection Association standards called for in the Fire Sprinkler System Specification Sheet to the degree required by the regulations of the State Fire Marshal;
- (2) shop drawings must bear the stamp, authorized signature, and license number of the fire sprinkler contractor licensed in South Carolina who prepared them.
(B) shop drawings must be submitted to the registered professional engineer who prepared the Fire Sprinkler System Specification Sheet, if applicable, to determine compliance with the Fire Sprinkler System Specification Sheet. Otherwise, the shop drawings must be submitted, to determine compliance with the Fire Sprinkler System Specification Sheet, to one of the following:
- (1) the local authority having jurisdiction;
- (2) the South Carolina State Fire Marshal's office; or
- (3) the engineering/review department of the owner's insurance underwriter or its designee.
- (C) The local authority having jurisdiction, the awarding authority, or the state agency having jurisdiction over the project may also require the submission of fire protection sprinkler system shop drawings for review, in addition to the requirements stated above, or may require their submission to the State Fire Marshal's office or other designee for review, but in no case may the stamp or seal of a registered professional engineer be required on shop drawings.
- (D) In lieu of performing its own plan review on plans submitted, the State Fire Marshal's office may accept the plan review of an insurance underwriter or its designee if it meets the standards established by the regulations of the State Fire Marshal's office.
- (E) A Certificate of Compliance certifying that the fire protection sprinkler system was designed and installed in accordance with the "Fire Sprinkler System Specification Sheet" must be delivered to the owner of the building, the authority having jurisdiction, and the State Fire Marshal's office on a form approved by the State Fire Marshal's office before a certificate of occupancy may be issued.