1. (a) Items. A speedometer testing station or mobile testing unit shall have sufficient tools to make repairs or adjustments and one or more of the following required equipment:

   1. (1) A dynamometer of a type approved by the Department.
   2. (2) A Speed-Master Quartz Speedometer Tester.
   3. (3) A 650-H-1 Stewart-Warner Speedometer Calibrator with adaptive equipment needed to operate this device or any device.
   4. (4) Any equipment or alternative technique approved by the Department and published in the Pennsylvania Bulletin.
2. (b) Periodic testing of speedometer testing equipment. Speedometer testing equipment shall be repaired, tested and adjusted for accuracy in accordance with the testing equipment manufacturer’s specifications. If the testing equipment manufacturer does not specify a testing schedule, the speedometer testing equipment shall be tested and adjusted for accuracy at least once every 60 days.

Source

The provisions of this § 105.33 adopted August 26, 1977, effective August 27, 1977, 7 Pa.B. 2422; amended June 23, 1978, effective June 24, 1978, 8 Pa.B. 1692; republished and compiled August 1, 1980, effective August 2, 1980, 10 Pa.B. 3199; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5051; amended February 17, 1989, effective February 18, 1989, 19 Pa.B. 640; amended September 30, 2016, effective October 1, 2016, 46 Pa.B. 6126. Immediately preceding text appears at serial page (218216).

Cross References

This section cited in 67 Pa. Code § 105.34 (relating to manner of testing speedometers); and 67 Pa. Code § 105a.4 (relating to system and speed timing device use and certification).