1. (a) An application to obtain, renew, modify or transfer a magazine license must be on forms approved by the Department. Before the Department issues, renews, transfers or modifies a license, the application must demonstrate that the applicant has complied with the applicable requirements of this chapter.

2. (b) A completed license application must include all of the following:

   1. (1) The applicant’s name, address, telephone number and ATF license or permit number.
   2. (2) A contact person, including name, title and telephone number.
   3. (3) The types and quantities of explosives to be stored within the magazine.
   4. (4) A map, plan or a sketch of the site location showing the nearest buildings, nearest railways, nearest highways, existing barricades, if any, and proposed barricades.
   5. (5) A plan showing the design and specifications of the magazine to be licensed.
   6. (6) A plan showing the design, specifications, dimensions and locations of all security measures to be installed under § 211.115(d) (relating to standards for classifying and storing explosives and constructing, maintaining and siting magazines).
   7. (7) The latitude and longitude of outdoor magazines except for Type 3 magazines as defined in 27 CFR 555.203(c) (relating to types of magazines).
   8. (8) The latitude and longitude of indoor magazines containing high explosives.

3. (c) A license renewal application must include all of the following:

   1. (1) The applicant’s name, address and telephone number.
   2. (2) A contact person, including name, title and telephone number.
   3. (3) The maximum amount and type of explosives for which the magazine is currently licensed.

Authority

The provisions of this § 211.113 amended under sections 1917-A and 1920-A of The Administrative Code of 1929 (71 P.S. § § 510-17 and 510-20); section 4.2 of the Surface Mining Conservation and Reclamation Act (52 P.S. § 1396.4b); section 11(e) of the Noncoal Surface Mining Conservation and Reclamation Act (52 P.S. § 3311(e)); sections 7 and 11 of the act of July 1, 1937 (P.L. 2681, No. 537) (73 P.S. § § 157 and 161); sections 3 and 4 of the act of July 10, 1957 (P.L. 685, No. 362) (73 P.S. § § 166 and 167); Reorganization Plan No. 8 of 1981 (71 P.S. § 751-35); section 2(f) of the act of May 18, 1937 (P.L. 654, No. 174) (43 P.S. § 25-2(f)); and Reorganization Plan No. 2 of 1975 (71 P.S. § 751-22).

Source

The provisions of this § 211.113 amended June 17, 2005, effective June 18, 2005, 35 Pa.B. 3409; amended June 22, 2018, effective June 23, 2018, 48 Pa.B. 3711. Immediately preceding text appears at serial pages (311865) to (311866).

Cross References

This section cited in 25 Pa. Code § 211.115 (relating to standards for classifying and storing explosives and constructing, maintaining and siting magazines).