(1) Either the manufacturer within the manufacturing facility or the contractor installing ignition-resistant construction systems on a manufactured dwelling on site shall complete and affix a self-certification label that is verified by quality assurances procedures in accordance with the manufacturer’s policies, and meets all of the following requirements:
- (a) Either printed on paper or scribed, etched or engraved in metal, plastic or of an equivalent material, with lettering at least 10 point font size;
- (b) At least 8.5 inches by 11 inches in size;
- (c) Affixed on a wall or door surface inside the water heater compartment, within the dropped ceiling cavity, or in another permanent and readily accessible location.
- (d) Positioned in a manner that allows a person to easily access and read the label;
- (e) Affixed with adhesive or fasteners that discourage the removal of the label;
- (f) Covered or laminated in a permanent manner with a material that will protect the label from damage or deterioration without obscuring the information; and
- (g) Clearly identifies which construction standards from OAR 918-500-7010 have been used.
- (2) A California self-certification label properly installed under Cal. Code Regs. Title 25, Secs. 4200-4216 is recognized as compliant with Section (1) of this rule.
Statutory/Other Authority
ORS 446.185 & ORS 446.180
Statutes/Other Implemented
ORS 446.185 & ORS 446.180
History
BCD 13-2025, adopt filed 12/29/2025, effective 01/01/2026