Or. Admin. R. 845-025-5720 – Labeling, Storage, and Security of Pre-Tested Marijuana Items

(1) Following samples being taken from a harvest or process lot batch a licensee must:
1. (a) Label the batch with the following information:
  1. (A) The licensee’s license number;
  2. (B) The harvest or process lot unique identification number;
  3. (C) The name and accreditation number of the laboratory that took samples and the name and accreditation number of the laboratory that will perform the testing, if different;
  4. (D) The test batch or sample unique identification numbers supplied by the laboratory personnel;
  5. (E) The date the samples were taken; and
  6. (F) In bold, capital letters, no smaller than 12 point font, “PRODUCT NOT TESTED.”
2. (b) Store and secure the batch in a manner that prevents the product from being tampered with or transferred or sold prior to test results being reported.
3. (c) Be able to easily locate a batch stored and secured under subsection (b) of this section and provide that location to the Commission or a laboratory upon request.
(2) A batch may be stored in more than one receptacle as long as the labeling requirements are met.
(3) If the samples pass testing the product may be sold or transferred in accordance with the applicable Commission rules.
(4) If the samples do not pass testing the licensee must comply with OAR 845-025-5740 and 333-007-0450, as applicable.
(5) Violations. A violation of this rule is a Category III violation.

ORS 475C.540, 475C.544 & ORS 475C.017

ORS 475C.540 & 475C.544