1. (1) Minimum side clearance for objects adjacent to curved track constructed on or after May 3, 1983, covered by OAR 741-310-0010 through 741-310-0050, shall be increased at the rate of 1/2 inch per degree of curvature above that prescribed for tangent track.
2. (2) The Department recommends that minimum side clearance for curved tracks, covered by OAR 741-310-0010 through 741-310-0050, be at least 12 inches greater than that prescribed for tangent track.

3. (3) See Figure 305-1 and Figure 310-1 for diagrams of the minimum side clearances.

   [ED. NOTE: Figures referenced are available from the agency.]

Statutory/Other Authority

ORS 184.616, 184.619, 823.011 & 824.052

Statutes/Other Implemented

ORS 824.050 & 824.052

History

RD 1-2006, f. & cert. ef. 8-28-06
RS 2-1998, f. & cert. ef. 8-20-98
RS 2-1996, f. & cert. ef. 3-14-96, Renumbered from 860-044-0106
PUC 4-1990, f. & cert. ef. 4-17-90, Order No. 90-488
PUC 6-1983, f. & ef. 6-13-83, Order No. 83-313
PUC 4-1983, f. & ef. 5-3-83, Order No. 83-242
PUC 13-1981, f. & ef. 12-21-81, Order No. 81-900