1. (1) An MCO must be issued by the vehicle’s manufacturer or the manufacturer’s authorized representative and must include the following:

   1. (a) The name of the manufacturer;
   2. (b) The vehicle year model, make and VIN;
   3. (c) The name of the franchised dealer, distributor or purchaser to whom interest has been assigned; and
   4. (d) The signature of the manufacturer.

2. (2) In addition to the requirements described in section (1) of this rule, an MCO issued for a vehicle manufactured in multiple stages, for example, a vehicle manufactured as a kit or glider kit, must include assignments of interest for each stage of manufacture. In addition, the MCO must:

   1. (a) Contain the vehicle year model, if the MCO is from the final stage manufacturer; or
   2. (b) Indicate the vehicle is incomplete and identify what portion of the vehicle is covered by the MCO.

3. (3) An MCO issued for a glider kit must identify that the MCO is for a kit or glider kit and contain at least the following:

   1. (a) The name of the glider kit manufacturer;
   2. (b) The glider kit year model, make and VIN; and
   3. (c) The name of the party to whom interest has been assigned.

4. (4) If the MCO does not contain the required information, DMV may:

   1. (a) Require further documentation;
   2. (b) Refuse to issue title; or
   3. (c) Both subsections (a) and (b) of this section.

Statutory/Other Authority

ORS 802.010, 803.045 & 803.050

Statutes/Other Implemented

ORS 803.045

History

DMV 16-2006, f. & cert. ef. 11-17-06
DMV 11-2005, f. 4-25-05, cert. ef. 5-1-05
MV 6-1987, f. & ef. 6-17-87, Renumbered from 735-090-0510