Permits are required for widths more than eight feet six inches:
- (1) Unless specifically stated on the permit as authorized by ORS Chapter 818 or rule, overwidth permits will not be valid if overwidth is caused by two or more items placed side by side or overlapping, or for items that could be loaded at a legal width.
- (2) Except as provided in section (3), items joined (by spot weld, tack weld, bolting, or strapping, etc.) to facilitate transport, shall be considered to be divisible loads and not eligible for overwidth permits.
- (3) Loads no wider than 14 feet consisting of pre-assembled railroad track sections are eligible for overwidth permits.
Statutory/Other Authority
ORS 184.619
Statutes/Other Implemented
ORS 818.210, 818.220 & 818.225
History
DOD 1-2025, amend filed 03/13/2025, effective 03/13/2025
HWD 4-2007, f. & cert. ef. 7-19-07
TO 3-2000, f. & cert. ef. 2-11-00
TO 7-1998, f. & cert. ef. 8-20-98
HWY 17-1990, f. & cert. ef. 12-28-90
HWY 1-1990(Temp), f. & cert. ef. 1-5-90