1. (1) No person may cause or permit the total emission of particulate matter from all wood particle dryers at a particleboard plant site to exceed 0.40 pounds per 1,000 square feet of board produced by the plant on a 3/4" basis of finished product equivalent.

2. (2) No person may cause or permit the visible emissions from the wood particle dryers at a particleboard plant to exceed 10 percent opacity as a six minute average, unless the permittee demonstrates by source test that the particulate matter emission limit in section (1) can be achieved at higher visible emissions. In no case are emissions allowed to equal or exceed 20 percent opacity as a six minute average. Specific opacity limits will be included in the permit for each affected source.

   NOTE: These rules are included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-200-0040.

Statutory/Other Authority

ORS 468.020 & 468A.025

Statutes/Other Implemented

ORS 468A.025

History

DEQ 7-2015, f. & cert. ef. 4-16-15
DEQ 1-2005, f. & cert. ef. 1-4-05
DEQ 6-2001, f. 6-18-01, cert. ef. 7-1-01
DEQ 14-1999, f. & cert. ef. 10-14-99, Renumbered from 340-030-0030
DEQ 4-1993, f. & cert. ef. 3-10-93
DEQ 23-1991, f. & cert. ef. 11-13-91
DEQ 14-1986, f. & ef. 6-20-86
DEQ 14-1981, f. & ef. 5-6-81
DEQ 4-1978, f. & ef. 4-7-78