1. (a) Reportable violations are as follows:

   1. (1) Three (3) positive result startup tests within a fifteen (15) minute time frame.
   2. (2) A circumvention.
   3. (3) A retest violation.
   4. (4) Tampering.
   5. (5) Permanent lockout.
   6. (6) A power violation.
2. (b) If required by the Installation Authority and/or Monitor, reportable violations shall be reported in the form and/or format designated by the Installation Authority and/or Monitor, within five business days, banking holidays excepted, after a maintenance and calibration service, violation reset service or removal of the device.
3. (c) The manufacturer shall ensure proper record maintenance.

4. (d) The manufacturer shall report to the Board, in the form and format designated by the Board:

   1. (1) Device installations.
   2. (2) Device removals.
   3. (3) Any violation reset.
   4. (4) Maintenance and calibration performed on an ignition interlock device as required by these rules.

Added at 27 Ok Reg 2667, eff 8-26-10

Amended at 32 Ok Reg 15369, eff 9-11-15

Amended at 33 Ok Reg 1190, eff 9-11-16

Amended at 35 Ok Reg 791, eff 9-14-18

Amended at 36 Ok Reg 1520, eff 9-14-19

Amended at 37 Ok Reg 1001, eff 9-11-20

Amended at 40 Ok Reg 235, eff 11-1-22 (emergency)

Amended at 40 Ok Reg 841, eff 8-11-23

Amended at 43 Ok Reg, Number 19, effective 6-25-26