- (a) No asbestos abatement may begin until a project design for that project, if required, has been approved by DOL.
(b) Project designs shall contain at a minimum:
- (1) A statement that DOL Abatement of Friable Asbestos Materials Rules apply.
- (2) Sequencing and phasing of work.
- (3) Identification of means of egress, a fire protection plan and a diagram for emergency escape routes, and fire extinguisher placements.
- (4) The quantity, type, percentage with bulk analysis unless presumed and a diagramed location of asbestos materials to be abated.
- (5) Abatement methods, and techniques, and numbers of containments, glovebags or mini-containments.
- (6) Details of personal and area air monitoring samples.
- (7) Numbers and locations of Clean Test samples and type of analysis to be employed.
- (8) Numbers, capacities, a diagram to identify the locations, and discharge points, if any, of negative air machines.
- (9) Details of the project containment(s), glovebag or mini-containments, including drawings. Details shall include all applicable subchapters of the Oklahoma Asbestos Control Act, including but not limited to scaffolding requirements and live electric isolation.
- (10) Details of the decontamination system(s).
- (11) The extent to which asbestos-contaminated soils, if any, must be removed, and the sampling methods of determining the efficacy of such removal.
- (12) Special materials or methods required to protect objects in the work area should be detailed, (e.g., plywood over carpeting or hardwood floors to prevent damage from scaffolds and falling material).
- (13) Any variances from the Abatement of Friable Asbestos Materials Rules.
- (c) Project designs for enclosure or encapsulation may provide for alternate methods to section 380:50-17-4, with the approval for such alternate methods at the discretion of DOL.
- (d) Project designs for industrial sites may be generally performance based specifications, subject to approval by DOL.
Amended at 9 Ok Reg 3309, eff 7-27-92
Amended at 27 Ok Reg 1887, eff 7-1-10